PhotoMOS.book Page 155 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) Micro-miniature SON package Lower output capacitance and on resistance (C×R5) 25V load voltage RF SON 1 Form A C×R5 (AQY221N3M) FEATURES New 2.95 .116 2.20 .087 1.40 .055 mm inch 1 4 2 3 1. Super miniature SON* package contributes to space savings and high density mounting. The SON type is a new PhotoMOS relay with approximately 43% the volume ratio of existing SSOP type. The super miniature leadless construction reduces the mounting area and enables high density mounting. 2. Lower output capacitance and onresistance Output capacitance (Cout): 1.1pF (typ.) On resistance (Ron): 5.5Ω (typ.) 3. High speed switching Turn on time: 0.02ms (typ.) Turn off time: 0.02ms (typ.) *Small Outline No-lead package Reduced to approximately 43% volume ratio TYPICAL APPLICATIONS Measuring and testing equipment 1. Testing equipment IC tester, Semiconductor performance tester, Probe cards, etc. 2. Board tester Bare board tester, In-circuit tester, Function tester, etc. Previous SSOP package (L: 2.65 × W: 4.45 × H: 1.80) (L: .104 × W: .175 × H: .071) Compliance with RoHS Directive H: 1.4 .055 New SON package L: 2.2 .087 W: 2.95 .116 Area comparison (including leads) Previous SOP4pin 100% Previous SSOP SON 44% 22% Flat lead Leadless TYPES Output rating*1 AC/DC dual use Load voltage 25 V Load current 150 mA Package SON Tape and reel packing style*2 Picked from the 1 and 4-pin side AQY221N3MY Picked from the 2 and 3-pin side AQY221N3MW Packing quantity in tape and reel 3,500 pcs. Notes: *1 Indicate the peak AC and DC values. *2 Only tape and reel package is available. For space reasons, only “1N3” is marked on the product as the part number. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Output Continuous load current Power dissipation Total power dissipation I/O isolation voltage Operating temperature Storage temperature Symbol IF VR IFP Pin VL IL Pout PT Viso Topr Tstg AQY221N3M 50mA 5V 1A 75mW 25V 0.15A 250mW 300mW 200V AC –40°C to +85°C –40°F to +185°F –40°C to +100°C –40°F to +212°F Remarks f=100 Hz, Duty factor=0.1% Peak AC, DC Non-condensing at low temperatures All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 156 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate current Input LED turn off current LED dropout voltage AQY221N3M 1.0 mA 3.0 mA 0.2 mA 0.9 mA 1.35 V (1.14 V at IF = 5 mA) 1.5 V IFon IFoff VF Ron IL = 80 mA IF = 50 mA IF = 5 mA IL = 80 mA Within 1 s on time IF = 0 mA VB = 0 V f = 1 MHz 7.5Ω Maximum 1.1 pF Typical Output capacitance Cout Maximum 1.5 pF Typical Off state leakage current 0.01 nA ILeak Maximum IF = 0 mA VL = Max. 10 nA IF = 5 mA VL = 10 V RL = 125Ω IF = 5 mA VL = 10 V RL = 125Ω 0.02 ms Typical Turn on time* Transfer characteristics IL = 80 mA 5.5Ω Typical On resistance Output Condition Ton Maximum 0.2 ms Typical 0.02 ms Turn off time* Toff Maximum 0.2 ms Typical I/O capacitance 0.8 pF Ciso Maximum f = 1 MHz VB = 0 V 1.5 pF Note: Variation possible through combinations of output capacitance and on resistance. For more information, please contact our sales office in your area. *Turn on/Turn off time Input 90% 10% Output Toff Ton RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Input LED current Symbol IF Recommended value 5 Unit mA ■ For Dimensions ■ For Schematic and Wiring Diagrams ■ For Cautions for Use ■ These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. For more information REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. Load current vs. Load voltage characteristics Ambient temperature: 25°C 77°F Allowable ambient temperature: –40°C to +85°C –40°F to +185°F Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Load current: 80mA (DC) 10 150 100 50 On resistance, Ω 200 Load current, mA Load current, mA 200 0 -40 3. On resistance vs. ambient temperature characteristics 150 100 50 -20 0 20 40 60 80 85 100 Ambient temperature, °C 0 8 6 4 2 0 5 10 15 20 25 Load voltage, V 30 0 -40 -20 0 20 40 60 80 85 Ambient temperature, °C All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 157 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) 5. Turn off time vs. ambient temperature characteristics 6. LED operate current vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC) 0.1 0.08 0.08 0.06 0.04 0.02 5 LED operate current, mA 0.1 Turn off time, ms Turn on time, ms 4. Turn on time vs. ambient temperature characteristics 0.06 0.04 -40 -20 0 0 20 40 60 80 85 Ambient temperature, °C 3 2 1 0.02 0 4 -40 -20 0 0 20 40 60 80 85 Ambient temperature, °C -40 -20 0 20 40 60 80 85 Ambient temperature, °C 7. LED turn off current vs. ambient temperature characteristics 8. LED dropout voltage vs. ambient temperature characteristics 9. Current vs. voltage characteristics of output at MOS portion Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC) LED current: 5 to 50 mA Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 3 2 1.4 1.3 50mA 1.2 30mA 20mA 1.1 10mA Load current, mA 4 Current, mA 1.5 LED dropout voltage, V LED operate current, mA 5 150 100 50 -2 -1.5 -1 -0.5 0.5 1 1.5 Voltage, V 2 -50 5mA 1 1 0 -40 -20 -100 0.9 0 20 40 60 80 85 Ambient temperature, °C -40 -20 -150 0 20 40 60 80 85 Ambient temperature, °C Voltage, V 10. Off state leakage current vs. load voltage characteristics 11. Turn on time vs. LED forward current characteristics 12. Turn off time vs. LED forward current characteristics Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F 0.1 0.5 0.08 0.4 10-5 10-7 10-9 0.06 0.04 0 5 10 15 20 25 Load voltage, V 0 30 0.3 0.2 0.1 0.02 10-11 10-13 Turn off time, ms Turn on time, ms Leakage current, A 10-3 0 10 20 30 40 50 LED forward current, mA 0 60 0 10 20 30 40 50 LED forward current, mA 60 14. Isolation vs. frequency characteristics (50Ω impedance) 15. Insertion loss vs. frequency characteristics (50Ω impedance) Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 100 2 80 1.5 2 Insertion loss, dB 2.5 Isolation, dB Output capacitance, pF 13. Output capacitance vs. applied voltage characteristics 60 1 40 0.5 20 1.5 1 0.5 0 0 5 10 15 20 25 Applied voltage, V 30 0 5 10 106 107 Frequency, Hz 108 0 4 10 All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 105 106 Frequency, Hz 107 PhotoMOS.book Page 158 Thursday, March 26, 2009 2:21 PM RF SON 1 Form A C×R5 (AQY221N3M) 16. On resistance distribution 17. Turn on time distribution 18. Turn off time distribution Measured portion: between terminals 3 and 4 Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F Load voltage: 10V (DC) Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F Load voltage: 10V (DC) Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F 40 50 50 40 40 Quantity, n Quantity, n 30 25 20 15 Quantity, n 35 30 30 20 20 10 10 10 5 0 2 3 4 5 6 7 On resistance, Ω 0 8 0 0.02 0.04 0.06 0.08 Turn on time, ms 0.1 0 0 0.02 19. LED operate current distribution Load voltage: 10V (DC) Continuous load current: 80mA (DC), n: 50pcs. Ambient temperature: 25°C 77°F 30 Quantity, n 25 20 15 10 5 0 0.4 0.6 0.8 1 1.2 1.4 1.6 LED operate current, mA 1.8 All Rights Reserved © COPYRIGHT Panasonic Electric Works Co., Ltd. 0.04 0.06 0.08 Turn on time, ms 0.1