AQY221N2S RF (Radio Frequency) C (by) × R 10 Type 4.3±0.2 .169±.008 4.4±0.2 .173±.008 2.1±0.2 .083±.008 mm inch UL CSA pending pending PhotoMOS RELAYS FEATURES TYPICAL APPLICATIONS 1. In addition to lower output capacitance between terminals than ever before, the PhotoMOS relay achieves low ON-resistance. Output capacitance(C): 1.0pF (typ.) ON resistance(R): 9.5Ω (typ.) 2. High speed switching Turn on time: 30µs Turn off time: 30µs 3. SO package 4-pin type in super miniature design 4. Low-level off state leakage current The SSR has an off state leakage current of several milliamperes, where as this PhotoMOS relay has only 10pA (typical) even with the rated load voltage 5. Controls low-level analog signals 6. Low thermal electromotive force (Approx. 1 µV) Measuring and testing equipment 1. Testing equipment for semiconductor performance IC tester, Liquid crystal driver tester, semiconductor performance tester 2. Board tester Bear board tester, In-circuit tester, function tester 3. Medical equipment Ultrasonic wave diagnostic machine 4. Multi-point recorder Warping, thermo couple TYPES Circuit arrangement Type 1 Form A AC/DC Output rating* Load Load voltage current 40 V 120 mA Tape and reel packing style Picked from the Picked from the 1/2-pin side 3/4-pin side AQY221N2SX AQY221N2SZ Packing quantity in tape and reel 1,000 pcs. * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix “X” or “Z” is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the initial letters of the product number “AQY and S”, the package type indicator “X” and “Z” are omitted from the seal. RATING 1. Absolute maximum ratings (Ambient temperature: 25°C 77°F) Item LED forward current Input Output AQY221N2S 50mA LED reverse voltage VR 3V Peak forward current IFP 1A 75mW Remarks f=100 Hz, Duty factor=0.1% Power dissipation Pin Load voltage (peak AC) VL 40V Continuous load current IL 0.12A Peak AC,DC Peak load current Ipeak 0.30A 100 ms (1 shot), VL= DC Power dissipation Pout 300mW Total power dissipation PT 350mW I/O isolation voltage Viso 1,500V AC Operating Topr –40°C to +85°C –40°F to +185°F Storage Tstg –40°C to +100°C –40°F to +212°F Temperature limits 544 Symbol IF Non-condensing at low temperatures AQY221N2S 2. Electrical characteristics (Ambient temperature: 25°C 77°F) Item LED turn off current LED dropout voltage Output AQY221N2S Condition IFon 0.9 mA 3.0mA 0.2 mA 0.85mA IL = 80 mA Minimum Typical Maximum Minimum Typical Maximum Minimum Typical Maximum LED operate current Input Symbol IFoff IL = 80 mA VF 1.14V (1.25 V at IF = 50mA) 1.5 V IF = 5mA 9.5Ω 12.5Ω Within 1 s on time IF = 5mA IL = 80 mA On resistance Minimum Typical Maximum Ron Output capacitance Minimum Typical Maximum Cout 1.0 pF 1.5 pF IF = 0 VB = 0 V f = 1 MHz Off state leakage current Minimum Typical Maximum ILeak 0.01 nA 10 nA IF = 0 VL = Max. Turn on time* Minimum Typical Maximum Ton 0.03 ms 0.5 ms IF = 5mA VL = 10V RL = 125Ω Turn off time* Minimum Typical Maximum Toff 0.03ms 0.2 ms IF = 5mA VL = 10V RL = 125Ω Ciso 0.8 pF 1.5pF 1,000MΩ Switching speed Transfer characteristics Minimum Typical Maximum Minimum Typical Maximum I/O capacitance Initial I/O isolation resistance Riso f = 1MHz VB = 0 500V DC *Turn on/Turn off time Input 90% 10% Output Toff Ton ■ For Dimensions, see Page 441. ■ For Schematic and Wiring Diagrams, see Page 444. ■ For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. Load current vs. Load voltage characteristics Ambient temperature: 25°C 77°F Allowable ambient temperature: –40°C to +85°C –40°F to +185°F 3. On resistance vs. ambient temperature characteristics Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: Max. (DC); Load current: 80mA (DC) 140 200 25 160 20 80 60 On resistance, Ω 100 Load current, mA Load current, mA 120 120 80 15 10 40 40 20 0 -40 -20 0 20 40 60 8085 100 Ambient temperature, °C 0 5 0 10 20 30 40 Load voltage, V 50 0 -40 -20 0 20 40 60 8085 Ambient temperature, °C 545 AQY221N2S 5. Turn off time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) 0.1 0.1 0.08 0.08 Turn off time, ms Turn on time, ms Measured portion: between terminals 3 and 4 LED current: 5 mA; Load voltage: 10V (DC); Continuous load current: 80mA (DC) 0.06 0.04 0.02 0 6. LED operate current vs. ambient temperature characteristics Load voltage: Max. (DC); Continuous load current: 80mA (DC) 2 LED operate current, mA 4. Turn on time vs. ambient temperature characteristics 0.06 0.04 0.02 -40 -20 0 20 40 60 0 8085 -40 0 -20 Ambient temperature, °C 20 40 60 1.5 1 0.5 0 8085 -40 -20 Ambient temperature, °C 0 20 40 60 8085 Ambient temperature, °C 7. LED turn off current vs. ambient temperature characteristics 8. LED dropout voltage vs. ambient temperature characteristics 9. Voltage vs. current characteristics of output at MOS portion Load voltage: Max. (DC); Continuous load current: 80mA (DC) LED current: 5 to 50 mA Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 120 1.5 2 1.5 1 0.5 current LED dropout voltage, V LED turn off current, mA 100 1.4 -40 -20 0 20 40 60 20 -3.0-2.5 -2.0 -1.5-1.0 -0.5 1.2 0.5 1 1.5 2.0 2.5 3.0 -20 voltage 50mA 30mA 20mA 10mA 5mA 1.1 0 8085 60 40 1.3 -40 -60 -80 1.0 0 80 -100 -40 -20 Ambient temperature, °C 0 20 40 60 -120 80 85 100 Ambient temperature, °C 10. Off state leakage current 11. LED forward current vs. turn on time characteristics 12. LED forward current vs. turn off time characteristics Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Load voltage: 10V (DC); Continuous load current: 80mA (DC); Ambient temperature: 25°C 77°F -6 10-9 Turn off time, ms Turn on time, ms Off state leakage current, A 10 0.1 0.16 10-3 0.12 0.08 0.04 0.08 0.06 0.04 0.02 10-12 0 0 10 20 30 40 50 0 0 10 20 Load voltage, V 30 40 50 14. Isolation characteristics (50Ω impedance) Measured portion: between terminals 3 and 4 Frequency: 1 MHz, 30m Vrms; Ambient temperature: 25°C 77°F Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 2 80 1.5 40 0.5 20 30 40 50 60 Measured portion: between terminals 3 and 4 Ambient temperature: 25°C 77°F 2 60 1 20 15. Insertion loss characteristics (50Ω impedance) Insertion loss, dB 100 Isolation, dB 2.5 10 LED forward current, mA LED forward current, mA 13. Applied voltage vs. output capacitance characteristics Output capacitance, pF 0 60 1.5 1 0.5 0 0 10 20 30 40 Applied boltage, V 546 50 0 4 10 105 106 107 Frequency, Hz 108 0 104 105 106 Frequency, Hz 107 AQY221N2S 16. On resistance distribution 17. Turn on time distribution 18. Turn off time distribution Measured portion: between terminals 3 and 4 Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25°C 77°F Load voltage: 10V(DC); Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25°C 77°F Load voltage: 10V(DC); Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25°C 77°F 40 35 60 35 30 50 Quantity, n Quantity, n 25 20 25 20 15 15 10 10 5 5 0 8.6 9 9.4 9.8 0 0.01 10.2 Quantity, n 30 30 20 10 0.02 0.03 0.04 0.05 Turn on time, ms On resistance, Ω 40 0.06 0 0.018 0.022 0.026 0.03 0.034 0.038 Turn off time, ms 19. LED operate current distribution Load voltage: 10V(DC); Continuous load current: 80mA(DC) Quantity, n=60; Ambient temperature: 25°C 77°F 30 Quantity, n 25 20 15 10 5 0 0.4 9/1/2000 0.6 0.8 1 1.2 LED operate current, mA 1.4 All Rights Reserved, © Copyright Matsushita Electric Works, 547 Ltd. Go To Online Catalog