TDP www.vishay.com Vishay Dale Thin Film Molded, Dual-In-Line Thin Film Resistor, Through Hole Network FEATURES Actual Size Vishay Dale Thin Film offers two standard circuits in a 14 pins and 16 pins molded dual-in-line over a 100 Ω to 100 kΩ resistance range. The networks feature ratio tolerance to 0.05 % with a TCR tracking of 5 ppm/°C. • Standard rugged, molded case construction (14 pins and 16 pins) Available • Highly stable thin film (500 ppm at +70 °C at 2000 h) Available • Low temperature coefficient (± 25 ppm/°C) • Compatible with automatic insertion equipment • Standard isolated pin one common schematic • Isolated and bussed schematics • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TCR 5 ABSOLUTE RATIO 0.1 0.05 TOL. SCHEMATIC Schematic TDP01 Pin 1 TRACKING 25 Schematic TDP03 Pin 1 TDP-1403 TDP-1401 TDP-1603 TDP-1601 Models: TDP1403 and TDP1603 7 or 8 isolated resistors Models: TDP1401 and TDP1601 13 or 15 resistors with one pin common STANDARD ELECTRICAL SPECIFICATIONS TEST Material Pin/Lead Number Resistance Range TCR: Absolute TCR: Tracking Tolerance: Absolute Tolerance: Ratio Power Rating: Resistor Power Rating: Package Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Thermal EMF Shelf Life Stability: Absolute Shelf Life Stability: Ratio Revision: 24-Sep-13 SPECIFICATIONS Passivated nichrome 14, 16 100 Ω to 100 kΩ ± 25 ppm/°C ± 5 ppm/°C ± 0.1 % ± 0.05 % to ± 0.5 % 0.05 W/resistor = 01 circuit 0.10 W/resistor = 03 circuit 0.8 W/package ΔR ± 0.05 % ΔR ± 0.015 % < 1 ppm/V (typical) 100 V -55 °C to +125 °C -55 °C to +150 °C < -30 dB 0.08 μV/°C ΔR ± 0.01 % ΔR ± 0.002 % CONDITIONS -55 °C to +125 °C -55 °C to +125 °C +25 °C +25 °C at +25 °C Maximum at +70 °C 2000 h at +70 °C 2000 h at +70 °C 1 year at +25 °C 1 year at +25 °C Document Number: 60045 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDP www.vishay.com Vishay Dale Thin Film DIMENSIONS AND IMPRINTING in inches and millimeters A DIMENSION INCHES MILLIMETERS A 0.755 19.18 B 0.250 6.35 C 0.075 1.91 D 0.100 2.54 E 0.018 0.46 F 0.060 1.52 G 0.025 0.64 H 0.190 4.83 J 0.130 3.30 K 0.320 8.13 L 0.310 7.87 M 0.010 0.25 A 0.755 19.18 B 0.250 6.35 C 0.025 0.64 D 0.100 2.54 E 0.018 0.46 F 0.060 1.52 G 0.025 0.64 H 0.190 4.83 J 0.130 3.30 K 0.320 8.13 L 0.310 7.87 M 0.010 0.25 Part TDP14XX B Pin 1 Vishay Logo Date Code H G K J F L C E D M A Part B TDP16XX Pin 1 Vishay Logo Date Code H G J K F L C E D M Revision: 24-Sep-13 Document Number: 60045 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TDP www.vishay.com Vishay Dale Thin Film MECHANICAL SPECIFICATIONS Resistive Element Passivated nichrome Substrate Material Alumina Body Conformal coated Terminals Copper alloy Tin/Lead Option Sn90 Lead (Pb)-free Option 100 % matte tin Tin/Lead and Lead (Pb)-free Finish Hot solder dip GLOBAL PART NUMBER INFORMATION New Global Part Numbering: TDP14031002BUF T T D P 1 4 0 3 1 0 0 2 B U F D P T 1 6 0 3 1 0 0 3 A U F GLOBAL MODEL (3 or 4 digits) PINS SCHEMATICS RESISTANCE TDP (Tin lead) 14 01 = 13 or 15 resistors with 1 common pin TDPT (Lead (Pb)-free) (e3) 16 First 3 digits are significant figures and the last digit specifies the number of zeroes to follow. 03 = 7 or 8 isolated resistors TOLERANCE AND RATIO TOLERANCE Absolute A = ± 0.1 % (1) B = ± 0.1 % C = ± 0.25 % D = ± 0.5 % F = ± 1.0 % PACKAGING Ratio ± 0.05 % ± 0.1 % ± 0.1 % ± 0.1 % ± 0.5 % UF = Tubed e.g.: 1001 = 1K 1002 = 10K Historical Part Number example: TDP14031001F (for reference purposes only) TDP 14 03 1001 F SERIES PINS SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Note (1) A tolerance on 250 Ω up Revision: 24-Sep-13 Document Number: 60045 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000