100-267 Datasheet

100-267
www.vishay.com
Vishay Dale Thin Film
Decade Divider, Single In-Line, Thin Film Divider,
Through Hole Resistor Network
FEATURES
• Tight ratio tolerance (0.01 %)
• 5 decade ratio divider
Available
• High voltage capability (300 V)
Available
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
Precision resistor networks comprised of series-connected
decade values are provided in single-in-line style with
edge-mounted leads on 100 mil centers. Integrated thin film
construction, laser-trimmed to extremely tight tolerances,
insures exceptionally close tracking over temperature and
throughout operating life, in either voltage division or current
monitoring mode. Voltage coefficient and noise are
extremely low. Designers gain several advantages over the
use of discrete resistor sets, including smaller size, better
overall tracking, greater reliability, and lower cost.
TYPICAL PERFORMANCE
TCR
TOL.
ABSOLUTE
TRACKING
25
5
ABSOLUTE
RATIO
0.1
0.01
SCHEMATIC
100
900
9K
90K
900K
100-267 Style
1
2
3
4
5
6
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
SPECIFICATIONS
CONDITIONS
Passivated nichrome
-
Pin/Lead Number
6
-
Resistance Range
100  to 1 M total
-
TCR: Absolute
± 25 ppm/°C
0 °C to +70 °C
TCR: Tracking
± 5 ppm/°C
0 °C to +70 °C
± 0.1 %
+25 °C
Tolerance: Absolute
Tolerance: Ratio
Power Rating: Resistor
Power Rating: Package
± 0.01 % to ± 0.1 %
+25 °C
0.100 W
Maximum at +70 °C
0.500 W
Maximum at +70 °C
Stability: Absolute
1000 ppm
2000 h at +70 °C
Stability: Ratio
200 ppm
2000 h at +70 °C
0.1 ppm/V
-
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Thermal EMF
300 V
-
0 °C to +70 °C
-
-55 °C to +125 °C
-
- 20 dB
-
0.08 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at +25 °C
Shelf Life Stability: Ratio
R ± 0.002 %
1 year at +25 °C
Revision: 14-Mar-16
Document Number: 60044
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
100-267
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS AND IMPRINTING in inches and millimeters
B
DIMENSION
INCHES
MILLIMETERS
A
0.100 max.
2.54
A
Vishay
Logo
100-267
C
Date Code
Pin 1
Ident.
E
B
0.620 max.
15.78
C
0.350 max.
8.89
D
0.125 min.
0.25
D
E
0.010 typ.
2.54
F
0.020 typ.
0.51
G
0.1 (5 x) typ.
2.54
F
G
PART NUMBER 100-
267-T
267-Q
Ratio Tolerance (1)
0.01 %
0.025 %
Voltage Rating
267-A
267-B
0.05 % 0.1 %
R1 + R2 + R3 + R4
RT
=
100 kΩ
1 MΩ
=
0.1
R1 + R2 + R3
RT
=
10 kΩ
1 MΩ
=
0.01
R1 + R2
RT
=
1 kΩ
1 MΩ
=
0.001
R1
=
100 Ω
300 V
Noise Index
< -30 dB
Note
(1) Excluding the 100 
900
100
1
2
9K
3
90K
4
900K
6
5
± 0.1 %
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Body
Terminals
Marking Resistance to Solvents
Tin/Lead Option
Lead (Pb)-free Option
Tin/Lead and Lead (Pb)-free Finish
Passivated nichrome
Alumina
Conformal coated
Copper alloy
Per MIL-PRF-83401
Sn60 - Sn63
Sn96.5, Ag3.0, Cu0.5
Hot solder dip
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: VTF100-267TUF
V
T
V
T
F
F
SERIES MODEL
(10 or 11 digits)
VTF100-267
(Tin lead)
VTF100S-267
(Lead (Pb)-free)
(e1)
1
1
0
0
0
0
S
2
-
TOLERANCE
(1 digit)
T = 0.01 % ratio
Q = 0.025 % ratio
A = 0.05 % ratio
B = 0.1 % ratio
6
2
7
6
7
T
U
F
T
U
F
PACKAGING
(2 digits)
UF = Tubed
Historical Part Number example: 100-267Q (for reference purposes only)
100
267
Q
SERIES
MODEL
TOLERANCE
Revision: 14-Mar-16
Document Number: 60044
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000