SIDACtor Protection Thyristors ® Broadband Optimized™ SDP Biased Series RoHS Description This new SIDACtor series provides overvoltage protection for applications such as VDSL2, ADSL2+, and 1000BaseT with minimal affect on the data signal. This latest silicon design innovation results in a capacitive loading characteristic that is compatible with these high bandwidth applications. This QFN package is a surface mount solution offered with a surge capability that meets or exceeds most worldwide inter-building standards and recommendations for lightning surge withstand capability of secondary protectors. Agency Approvals Features & Benefits Agency Agency File Number • RoHS compliant E133083 • QFN (Quad Flatpak No-lead) surface mount package Pinout Designation • Low insertion loss Tip in 1 8 Tip out - Bias 2 7 Ground 3 6 + Bias Ground Ring in 4 5 Ring out • Low log linear voltage dependent capacitance • Crowbarring speed of nanoseconds • Teccor branded SIDACtor technology • Balanced longitudinal load capacitance • Balanced OV protection • Bidirectional transient voltage protection Schematic Symbol Protection Solution for +Bias Tip Ground Ring -Bias • YD/T 950 • IEC 61000-4-5 • YD/T 993 • ITU K.20/21 Basic Level • YD/T 1082 • ITU K.20/21 Enhanced Level • GR 1089 Intra-building • GR 1089 Inter-building • TIA-968-A Electrical Characteristics Part Number Marking SDP0080Q38CB SDP0640Q38CB SDP0720Q38CB SDP0900Q38CB SDP1100Q38CB SDP1300Q38CB SDP1800Q38CB SDP2600Q38CB SDP3100Q38CB SDP3500Q38CB SDP-8C SDP06C SDP07C SDP09C SDP10C SDP13C SDP18C SDP26C SDP31C SDP35C VDRM@ IDRM=5µA VS@100V/µS IH IS IT@VT VT@IT=2.2 amp Volts Volts mAmps mAmps Amps Volts Min 6 58 65 75 90 120 170 220 275 320 Max 25 77 88 98 130 160 220 300 350 400 Min 50 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 Max 8 8 8 8 8 8 8 8 8 8 Capacitance @1MHz @ 2V bias See Capacitance vs. Bias Voltage Graph • All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range. • Listed SIDACtor devices are bidirectional. All electrical parameters and surge ratings apply to forward and reverse polarities. • SDP Biased Series 1 SIDACtor® Protection Thyristor Datasheet www.littelfuse.com ©2008 Littelfuse SIDACtor Protection Thyristors ® Broadband Optimized™ 50/60 Hz Ratings Parameter Name Test Conditions Value Units ITSM Maximum non-repetitive on-state current, 50/60 Hz 0.5s 1s 2s 5s 30s 900s 6.5 4.6 3.4 2.3 1.3 0.73 A Surge Ratings ITSM IPP Series C 2x10µs 1.2x50µs/8x20µs 10x700/5x310µs 10x1000µs 600VRMS 1 cycle Amps Amps Amps Amps ARMS Min Min Min Min Min 500 400 200 100 45 Note: T he lightning surge may be repeated after the device returns to its initial conditions. The device must initially be in thermal equilibrium with -40°C ≥ TJ ≥150°C Thermal Considerations Package 5x6 QFN Symbol Parameter Value Unit TJ Junction Temperature -65 to +150 °C TSTG Storage Temperature Range -65 to +150 °C RθJA Thermal Resistance: Junction to Ambient 100 °C/W Note : The device must initially be in thermal equilibrium with -40°C ≥TJ ≥ 150°C V-I Characteristics Capacitance vs. Voltage* 40 +I 35 IT IDRM +V VT VDRM VS Capacitance (pF) 30 IS IH -V 0V 5V 24V 50V 3.3V 12V 30V 25 20 15 10 5 -I 0 0.1 1 10 100 Line Voltage * bias voltage must be lower than VDRM SDP Biased Series 2 SIDACtor® Protection Thyristor Datasheet www.littelfuse.com ©2008 Littelfuse SIDACtor Protection Thyristors ® Broadband Optimized™ Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 10 IH 8 6 25 ˚C 4 2 IH (TC = 25 ˚C) 12 Ratio of Percent of VS Change – % 14 0 -4 -6 -8 -40 -20 0 2.0 1.8 1.6 1.4 25 ˚C 1.2 1.0 0.8 0.6 0.4 -40 -20 20 40 60 80 100 120 140 160 0 40 60 80 100 120 140 160 Case Temperature (TC) – ˚C Junction Temperature (TJ) – ˚C Soldering Parameters Pb – Free assembly (see Figure1) Reflow Condition - Temperature Min (Ts(min)) Pre Heat 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes max Do not exceed 260°C Environmental Specifications High Temperature Voltage Blocking Temperature Cycling Physical Specifications Biased Temperature & Humidity Terminal Material Copper Alloy Terminal Finish 100% Matte Tin Plated Low Temp. Storage Body Material UL recognized epoxy meeting flammability classification 94V-0 Thermal Shock SDP Biased Series High Temp. Storage MIL-STD-750: Method 1040, Condition A 80% min VDRM (VAC-peak), 150°C, 504 hours MIL-STD-750: Method 1051 -65°C to 150°C, 15-minute dwell, 100 cycles EIA/JEDEC: JESD22-A101 52VDC, 85°C, 85%RH, 1008 hours MIL-STD-750: Method 1031 150°C, 1008 hours -65°C, 1008 hours MIL-STD-750: Method 1056 0°C to 100°C, 5-minute dwell, 10-second transfer, 10 cycles Autoclave EIA/JEDEC: JESD22-A102 (Pressure Cooker Test) 121°C, 100%RH, 2atm, 168 hours Resistance to MIL-STD-750: Method 2031 Solder Heat 260°C, 10 seconds 3 SIDACtor® Protection Thyristor Datasheet www.littelfuse.com ©2008 Littelfuse SIDACtor Protection Thyristors ® Broadband Optimized™ Dimensions Inches A 5 D B 6 7 Dimension 8 H Typ Max Min Typ Max A 0.187 0.197 0.207 4.745 5.000 5.253 B 0.226 0.236 0.246 5.745 6.000 6.253 C 0.054 0.059 0.064 1.374 1.500 1.628 D 0.165 0.168 0.171 4.199 4.275 4.351 E 0.027 0.030 0.033 0.686 0.762 0.838 F 0.011 0.014 0.017 0.279 0.356 0.432 G 0.047 0.050 0.053 1.194 1.270 1.346 H 0.032 0.035 0.038 0.800 0.876 0.953 I 0.027 0.030 0.033 0.686 0.762 0.838 J 0.100 0.103 0.106 2.540 2.616 2.692 I J E 4 3 1 2 G PIN 1 INDICATOR F PIN 1 & 8: TIP CONNECTIONS PIN 2: BIAS (-) C PIN 3 & 6: GROUND CONNECTIONS PIN 4 & 5: RING CONNECTION F (ref) Millimeters Min PIN 7: BIAS (+) G (ref) Part Numbering System Part Marking System SDP xxx 0 Q38 C B Biased FAMILY SDP: SIDACtor DSL Protector XXXXXX RATING C: 10x1000 100A PACKAGE Q38: QFN 5x6 MEDIAN VOLTAGE XXXXX First Line: Part number Second Line: Date code 0 = Single protector Packaging Options Package Type Description Packaging Quantity Added Suffix Industry Standard QFN 5x6x1.5 4,000 RP 12mm Embossed Carrier Tape & Reel SDP Biased Series 4 SIDACtor® Protection Thyristor Datasheet www.littelfuse.com ©2008 Littelfuse SIDACtor Protection Thyristors ® Broadband Optimized™ Tape and Reel Specifications ITEM C A D N W1 B REEL OUTLINE CARRIER TAPE END COVER TAPE START TRAILER 160mm MIN LEADER 400mm MIN TAPE LEADER AND TRAILER D0 PIN 1 MARK THIS SIDE P0 P2 T D1 F W0 K0 P1 COVER TAPE E1 CARRIER TAPE A0 B0 CARRIER TAPE DIMENSIONS E2 W A B C D N W1 A0 B0 A1 B1 D0 D1 E1 E2 F K0 P0 P1 P2 T W W0 SDP Biased Series Inches Min Typ Max Reel Diameter N/A 12.992 Drive Spoke Width 0.059 N/A Arbor Hole Diameter 0.504 0.531 Drive Spoke Diameter 0.795 N/A Hub Diameter 1.969 N/A Reel Inner Width at Hub 0.488 0.567 Pocket Width at bottom 0.204 0.208 0.212 Pocket Length at bottom 0.244 0.248 0.252 Pocket Width at opening 0.212 Pocket Length at opening 0.252 Feed Hole Diameter 0.059 0.061 0.063 Pocket Hole Diameter 0.059 0.063 N/A Feed hole position 1 0.065 0.069 0.073 Feed hole position 2 0.400 0.404 0.408 Feed hole center-Pocket 0.212 0.216 0.220 hole center 2 Pocket Depth 0.067 0.071 0.075 Feed Hole Pitch 0.153 0.157 0.161 Component Spacing 0.311 0.315 0.319 Feed hole center-Pocket 0.077 0.079 0.081 hole center 1 Carrier Tape Thickness 0.010 0.012 0.014 Embossed Carrier Tape 0.460 0.472 0.484 Width Cover Tape Width 0.358 0.362 0.366 DESCRIPTION 5 SIDACtor® Protection Thyristor Datasheet Millimeters Min Typ Max N/A 330.0 1.50 N/A 12.80 13.50 20.20 N/A 50.00 N/A 12.40 14.40 5.20 5.30 5.40 6.20 6.30 6.40 5.40 6.40 1.50 1.55 1.60 1.50 1.60 N/A 1.65 1.75 1.85 10.15 10.25 10.35 5.40 5.50 5.60 1.70 3.90 7.90 1.90 1.80 4.00 8.00 2.00 1.90 4.10 8.10 2.10 0.25 0.30 0.35 11.70 12.00 12.30 9.10 9.20 9.30 www.littelfuse.com ©2008 Littelfuse