5482

SENSITRON________ _
SEMICONDUCTOR
SDA1009SS
SDA1009S
TECHNICAL DATA
DATA SHEET 5482, REV.
Diode Array








Devices Are Serialized
Eight sets of double diodes in a single package
Die manufactured on qualified JANS line
Built and screened to space level quality (SDA1009SS)
Quality Conformance Inspection (QCI) in accordance with MIL-PRF-38534 is performed
on each lot (SDA1009SS)
Add suffix “S” for screening per MIL-PRF-38534, Class H (SDA1009S)
Add suffix “SS” for Space Level Screening per MIL-PRF-38534, Class K (SDA1009SS)
Each diode similar to JANS1N5615
MAX. RATINGS / ELECTRICAL CHARACTERISTICS FOR EACH DIODE
O
All rating at are TA = 25 C unless otherwise specified
RATING
Peak Inverse Voltage (DC)
Average DC Output Current Per Diode
TA = 55oC
TA = 100oC
Peak Single Cycle Surge Current (1)
(TP=8.3ms single half-Sine wave)
Steady State Power Dissipation per
Package (2)
Max. Operating Junction Temperature
Max. Operating Ambient Temperature
Storage Temperature Range
Maximum forward voltage @ 3.0A
Tp = 300µs; 2% duty cycle
Maximum Instantaneous Reverse
Current At Rated (PIV)
Max. Reverse Recovery Time
IF =0.5 A, IR= 1.0A, IRR =0.25A
Max. Capacitance
f= 1MHz, VR = 12V
Thermal Resistance Junction to Case
Note:
SYMBOL
MAX
UNIT
PIV
400
V
IO
1
0.75
A
IFSM
10
A
PT
1000
mW
TJ
-55 to +150
o
-30 to 100
o
TSTG
-65 to +175
o
Vf
3.2
V
TA= 25oC
TA = 100oC
0.5
25
A
trr
150
ns
CT
30
pF
JC
21
TOP
C
C
C
o
C/W
(1) Each diode
0
0
(2) Derate at 8mW/ C above 25 C
©2016 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
(631) 586-7600 FAX (631) 242-9798  www.sensitron.com  [email protected]
SENSITRON________ _
SEMICONDUCTOR
SDA1009SS
SDA1009S
TECHNICAL DATA
DATA SHEET 5482, REV.
Mechanical Outline
.4 5 0 ± .0 1 2
P IN 1
.0 1 5
.4 0 0
MAX
P IN 1
.0 5 0
.2 8 5
MAX
.1 2 5
MAX
.0 3 8 ± .0 0 8
.0 0 5
+ .0 0 3
- .0 0 1
.0 1 5 ± .0 0 5
Electrical Schematic
DISCLAIMER:
1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product
characteristics. Before ordering, purchasers are advised to contact the Sensitron Semiconductor sales department for the latest version of the
datasheet(s).
2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical
equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’
fail-safe precautions or other arrangement .
3- In no event shall Sensitron Semiconductor be liable for any damages that may result from an accident or any other cause during operation of
the user’s units according to the datasheet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any
other problems that may result from applications of information, products or circuits described in the datasheets.
4- In no event shall Sensitron Semiconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at
a value exceeding the absolute maximum rating.
5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor.
6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of Sensitron
Semiconductor.
7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder
maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When
exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.
©2016 Sensitron Semiconductor  221 West Industry Court  Deer Park, NY 11729-4681
(631) 586-7600 FAX (631) 242-9798  www.sensitron.com  [email protected]