Aluminum Electrolytic Capacitors/ ED Snap-in Type Series: ED n Features Type : TS Country of Origin Endurance: 105°C 3000h High ripple current capability in high frequency range. High ripple current and miniaturization to help miniaturization of equipment. RoHS directive compliant Japan U.S.A Malaysia n Specifications Category temp. range -40 to +105°C Rated W.V. Range 200,220,250 V.DC 220 to 2200 µF Nominal Cap. Range Capacitance Tolerance -25 to + 105°C 400, 420, 450 V .DC 56 to 560 µ F ±20 % (120Hz/+20°C) 3√CV (µA) max. after 5 minutes application of rated working voltage at +20°C C:Capacitance(µF) V: W.V. (V.DC) DC Leakage Current tan δ Frequency Correction Factor for Ripple Current Please see the attached standard products list Frequency (Hz) 50 60 100 120 500 1k 10k to Correction Factor 0.5 0.55 0.68 0.70 0.85 0.90 1.00 After 3000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105°C, the capacitor shall meet the following limits. Capacitance change ±20 % of initial measured value tan δ < 200 % of initial specified value DC leakage current < initial specified value After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in Endurance(With voltage treatment) Endurance Shelf Life n Dimensions in mm (not to scale) φD+1.0 max Polarity bar (10.0) 2-φ2.0±0.1 PET Sleeve 10.0±0.1 Vent L+2.0 max Recommended PWB piercing plan 4.0± 0.5 +0.2 0.8 - 0.1 Terminal (t= 0.8) (3.5) 4.0±0.5 2.0 max Bottom of can 1.5 ± 0.2 Standard terminal type does not require terminal trimming process. Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 — EE127 — Aluminum Electrolytic Capacitors/ ED n Standard Products W.V. Cap. (±20%) (V) Case size Specification Ripple Length Dia. tan δ current (50kHz) (120Hz) (+105°C) (+20°C) (mm) (A) Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (pcs) (µF) (mm) 270 22 25 2.03 0.15 EETED2D271HJ 200 330 22 30 2.23 0.15 EETED2D331HJ 200 390 22 30 2.44 0.15 EETED2D391HJ 200 25 25 2.44 0.15 EETED2D391JJ 200 22 35 2.64 0.15 EETED2D471HJ 200 25 30 2.64 0.15 EETED2D471JJ 200 22 40 3.05 0.15 EETED2D561HJ 200 25 30 3.05 0.15 EETED2D561JJ 200 470 560 680 200 820 1000 (Without P.V.C.plate) 30 25 3.05 0.15 EETED2D561KJ 200 22 45 3.45 0.15 EETED2D681HJ 200 25 35 3.45 0.15 EETED2D681JJ 200 30 30 3.45 0.15 EETED2D681KJ 200 22 50 3.76 0.15 EETED2D821HJ 200 25 40 3.76 0.15 EETED2D821JJ 200 30 30 3.76 0.15 EETED2D821KJ 200 35 25 3.76 0.15 EETED2D821LJ 200 25 45 4.06 0.15 EETED2D102JJ 200 30 35 4.06 0.15 EETED2D102KJ 100 35 30 4.06 0.15 EETED2D102LJ 200 30 40 4.47 0.15 EETED2D122KJ 100 35 35 4.47 0.15 EETED2D122LJ 100 30 50 5.08 0.15 EETED2D152KJ 100 35 40 5.08 0.15 EETED2D152LJ 100 1800 35 45 5.48 0.15 EETED2D182LJ 100 2200 35 50 5.89 0.15 EETED2D222LJ 100 270 22 30 2.03 0.15 EETED2Q271HJ 200 330 22 30 2.23 0.15 EETED2Q331HJ 200 25 25 2.23 0.15 EETED2Q331JJ 200 390 22 35 2.44 0.15 EETED2Q391HJ 200 25 30 2.44 0.15 EETED2Q391JJ 200 470 22 40 2.64 0.15 EETED2Q471HJ 200 1200 1500 220 560 680 820 25 30 2.64 0.15 EETED2Q471JJ 200 30 25 2.64 0.15 EETED2Q471KJ 200 22 45 3.05 0.15 EETED2Q561HJ 200 25 35 3.05 0.15 EETED2Q561JJ 200 30 30 3.05 0.15 EETED2Q561KJ 200 25 40 3.45 0.15 EETED2Q681JJ 200 30 30 3.45 0.15 EETED2Q681KJ 200 35 25 3.45 0.15 EETED2Q681LJ 200 25 45 3.76 0.15 EETED2Q821JJ 200 30 35 3.76 0.15 EETED2Q821KJ 100 Endurance : 105°C 3000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 — EE128 — Aluminum Electrolytic Capacitors/ ED n Standard Products W.V. Cap. (±20%) (V) 220 Specification Ripple tan δ current (50kHz) (120Hz) (+20°C) ( m m ) (+105°C) (A) (µF) (mm) 820 35 30 3.76 1000 30 40 35 35 30 35 1500 1800 Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) 0.15 EETED2Q821LJ 4.06 0.15 EETED2Q102KJ 100 4.06 0.15 EETED2Q102LJ 100 45 4.47 0.15 EETED2Q122KJ 100 40 4.47 0.15 EETED2Q122LJ 100 35 45 5.08 0.15 EETED2Q152LJ 100 35 50 5.48 0.15 EETED2Q182LJ 100 220 22 30 1.83 0.15 EETED2E221HJ 200 270 22 30 2.03 0.15 EETED2E271HJ 200 25 25 2.03 0.15 EETED2E271JJ 200 22 35 2.23 0.15 EETED2E331HJ 200 25 30 2.23 0.15 EETED2E331JJ 200 22 40 2.44 0.15 EETED2E391HJ 200 25 30 2.44 0.15 EETED2E391JJ 200 1200 330 390 470 250 560 680 200 30 25 2.44 0.15 EETED2E391KJ 200 22 45 2.64 0.15 EETED2E471HJ 200 25 35 2.64 0.15 EETED2E471JJ 200 30 30 2.64 0.15 EETED2E471KJ 200 25 40 3.05 0.15 EETED2E561JJ 200 30 30 3.05 0.15 EETED2E561KJ 200 35 25 3.05 0.15 EETED2E561LJ 200 25 45 3.45 0.15 EETED2E681JJ 200 30 35 3.45 0.15 EETED2E681KJ 100 35 30 3.45 0.15 EETED2E681LJ 200 30 40 3.76 0.15 EETED2E821KJ 100 35 35 3.76 0.15 EETED2E821LJ 100 30 50 4.06 0.15 EETED2E102KJ 100 35 40 4.06 0.15 EETED2E102LJ 100 1200 35 45 4.47 0.15 EETED2E122LJ 100 1500 35 50 5.08 0.15 EETED2E152LJ 100 82 22 25 1.14 0.15 EETED2G820HJ 200 100 22 30 1.30 0.15 EETED2G101HJ 200 25 25 1.30 0.15 EETED2G101JJ 200 22 35 1.46 0.15 EETED2G121HJ 200 25 30 1.46 0.15 EETED2G121JJ 200 22 40 1.53 0.15 EETED2G151HJ 200 25 30 1.53 0.15 EETED2G151JJ 200 820 1000 120 400 Case size Dia. Length 150 180 30 25 1.53 0.15 EETED2G151KJ 200 22 45 1.60 0.15 EETED2G181HJ 200 25 35 1.60 0.15 EETED2G181JJ 200 30 30 1.60 0.15 EETED2G181KJ 200 Endurance : 105°C 3000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 — EE129 — Aluminum Electrolytic Capacitors/ ED n Standard Products W.V. Cap. (±20%) (V) (50kHz) (120Hz) (+105°C) (+20°C) (mm) (A) (µF) (mm) 220 22 50 2.03 0.15 25 40 2.03 30 30 2.03 Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (Without P.V.C.plate) (pcs) EETED2G221HJ 200 0.15 EETED2G221JJ 200 0.15 EETED2G221KJ 200 35 25 2.03 0.15 EETED2G221LJ 200 25 45 2.23 0.15 EETED2G271JJ 200 30 35 2.23 0.15 EETED2G271KJ 100 35 30 2.23 0.15 EETED2G271LJ 200 30 40 2.44 0.15 EETED2G331KJ 100 35 30 2.44 0.15 EETED2G331LJ 200 30 45 2.64 0.15 EETED2G391KJ 100 35 35 2.64 0.15 EETED2G391LJ 100 470 35 40 2.84 0.15 EETED2G471LJ 100 560 35 45 3.05 0.15 EETED2G561LJ 100 68 22 25 1.08 0.15 EETED2S680HJ 200 82 22 30 1.14 0.15 EETED2S820HJ 200 25 25 1.14 0.15 EETED2S820JJ 200 100 22 30 1.30 0.15 EETED2S101HJ 200 25 25 1.30 0.15 EETED2S101JJ 200 120 22 35 1.46 0.15 EETED2S121HJ 200 25 30 1.46 0.15 EETED2S121JJ 200 22 40 1.53 0.15 EETED2S151HJ 200 25 35 1.53 0.15 EETED2S151JJ 200 270 400 330 390 150 180 420 220 270 450 Case size Specification Ripple Dia. Length current tan δ 30 25 1.53 0.15 EETED2S151KJ 200 22 45 1.60 0.15 EETED2S181HJ 200 25 40 1.60 0.15 EETED2S181JJ 200 30 30 1.60 0.15 EETED2S181KJ 200 35 25 1.60 0.15 EETED2S181LJ 200 25 45 2.03 0.15 EETED2S221JJ 200 30 35 2.03 0.15 EETED2S221KJ 100 35 30 2.03 0.15 EETED2S221LJ 200 25 50 2.40 0.15 EETED2S271JJ 200 30 40 2.40 0.15 EETED2S271KJ 100 35 30 2.40 0.15 EETED2S271LJ 200 330 30 45 2.54 0.15 EETED2S331KJ 100 35 35 2.54 0.15 EETED2S331LJ 100 390 30 50 2.73 0.15 EETED2S391KJ 100 35 40 2.73 0.15 EETED2S391LJ 100 470 35 45 3.18 0.15 EETED2S471LJ 100 56 22 25 0.95 0.15 EETED2W560HJ 200 68 22 30 1.08 0.15 EETED2W680HJ 200 25 25 1.08 0.15 EETED2W680JJ 200 Endurance : 105°C 3000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 — EE130 — Aluminum Electrolytic Capacitors/ ED n Standard Products W.V. Cap. (±20%) (V) Specification Case size Ripple Length Dia. tan δ current (50kHz) (120Hz) (+105°C) (+20°C) (mm) (A) Part No. Min.PackagingQ'ty PET sleeve Terminal Length 4.0mm (pcs) (µF) (mm) 82 22 30 1.14 0.15 EETED2W820HJ 200 25 25 1.14 0.15 EETED2W820JJ 200 22 35 1.30 0.15 EETED2W101HJ 200 25 30 1.30 0.15 EETED2W101JJ 200 22 40 1.46 0.15 EETED2W121HJ 200 25 35 1.46 0.15 EETED2W121JJ 200 100 120 150 450 180 (Without P.V.C. plate) 30 25 1.46 0.15 EETED2W121KJ 200 22 45 1.53 0.15 EETED2W151HJ 200 25 40 1.53 0.15 EETED2W151JJ 200 30 30 1.53 0.15 EETED2W151KJ 200 35 25 1.53 0.15 EETED2W151LJ 200 22 50 1.60 0.15 EETED2W181HJ 200 25 40 1.60 0.15 EETED2W181JJ 200 30 30 1.60 0.15 EETED2W181KJ 200 35 25 1.60 0.15 EETED2W181LJ 200 25 45 2.03 0.15 EETED2W221JJ 200 30 35 2.03 0.15 EETED2W221KJ 100 35 30 2.03 0.15 EETED2W221LJ 200 270 30 40 2.45 0.15 EETED2W271KJ 100 35 35 2.45 0.15 EETED2W271LJ 100 330 30 50 2.64 0.15 EETED2W331KJ 100 35 40 2.64 0.15 EETED2W331LJ 100 390 35 40 2.82 0.15 EETED2W391LJ 100 470 35 50 3.53 0.15 EETED2W471LJ 100 220 Endurance : 105°C 3000h Terminal Pitch : 10mm When capacitors of φ35×45L and φ35×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately. Mar.2006 — EE131 —