FVE www.vishay.com Vishay Huntington Wirewound Resistors, Industrial Power, Vitreous Coated, Fixed Edgewound Tubular FEATURES • High temperature vitreous coating • Complete welded construction • Excellent stability in operation (< 3 % change resistance) • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HISTORICAL MODEL POWER RATING P25 °C W RESISTANCE RANGE RESISTANCE RANGE ±5% ± 10 % WEIGHT (typical) g FVE0050 FVE-50 50 1.0 to 3.8 1.0 to 3.8 18 FVE0090 FVE-90 90 0.10 to 5.7 0.10 to 5.7 36 FVE0100 FVE-100 100 1.0 to 6.1 0.15 to 6.1 41 FVE0110 FVE-110 110 1.0 to 7.4 0.20 to 7.4 49 FVE0120 FVE-120 120 1.0 to 8.6 0.1 to 8.6 54 FVE0140 HLZ-140 140 0.08 to 9.0 0.08 to 9.0 109 FVE0155 FVE-155 155 1.0 to 12.5 0.1 to 12.5 129 FVE0165 FVE-165 165 0.35 to 13.0 0.35 to 13.0 91 FVE0180 HLZ-165 165 0.35 to 13.0 0.35 to 13.0 91 FVE0240 FVE-240 240 1.0 to 18 0.1 to 18 186 FVE0300 FVE-300 300 1.0 to 25 0.15 to 25 236 FVE0375 FVE-375 375 1.0 to 32 0.20 to 32 286 FVE0420 FVE-420 420 1.0 to 35.8 0.25 to 35.8 320 FVE0500 FVE-500 500 1.0 to 46.2 0.30 to 46.2 381 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: FVE030020E15R0JE (visit www.vishay.net Vishay Dale parts numbering manual for all options) F V E GLOBAL MODEL (7 digits) 0 3 0 0 2 0 E 1 5 R 0 J E TERMINAL DESIGNATION (2 digits) TERMINAL FINISH (1 digit) VALUE (4 digits) TOLERANCE (1 digit) PACKAGING CODE (1 digit) SPECIAL (up to 2 digits) 06 15 20 E = lead (Pb)-free R = decimal 1R50 = 1.5 J=±5% K = ± 10 % E = lead (Pb)-free bulk pack (dash number) from 1 to 99 as applicable 91 = 100 style BKT 92 = 200 style BKT 93 = 300 style BKT (see Standard Electrical Specifications Global Model column for options) Historical Part Number example: FVE-300-15-5 % FVE-300 15 5% HISTORICAL MODEL RESISTANCE VALUE TOLERANCE Revision: 03-Jun-16 SPECIAL Document Number: 31842 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FVE www.vishay.com Vishay Huntington DIMENSIONS in inches (millimeters) TERMINAL SETBACK DISTANCE CENTER TO CENTER CORE DIMENSIONS O.D. I.D. LENGTH ± 0.031 ± 0.031 (± 0.79) (± 0.79) 2.000 0.750 0.500 (50.8) (19.05) (12.70) 4.000 0.563 0.313 (101.6) (14.30) (7.95) 3.500 0.750 0.500 (88.90) (19.05) (12.70) 4.000 0.750 0.500 (101.6) (19.05) (12.70) 4.500 0.750 0.547 (114.3) (19.05) (13.89) 4.000 1.125 0.750 (101.6) (28.58) (19.05) 4.250 1.125 0.750 (107.95) (28.58) (19.05) 6.500 0.750 0.750 (165.1) (19.05) (19.05) 6.500 0.750 0.750 (165.1) (19.05) (19.05) 6.500 1.125 0.750 (165.1) (28.58) (19.05) 8.500 1.125 0.750 (215.9) (28.58) (19.05) 10.500 1.125 0.750 (266.7) (28.58) (19.05) 11.750 1.125 0.750 (298.45) (28.58) (19.05) 10.500 1.625 1.125 (266.7) (41.28) (28.58) MODEL FVE0050 FVE0090 FVE0100 FVE0110 FVE0120 FVE0140 FVE0155 FVE0165 FVE0180 FVE0240 FVE0300 FVE0375 FVE0420 FVE0500 TERMINAL SETBACK DISTANCE CENTER TO CENTER (REF.) 0.094 (2.18) 0.094 (2.39) 0.079 (2.01) 0.125 (3.18) 0.125 (3.18) 0.219 (5.56) 0.282 (7.16) 0.125 (3.18) 0.125 (3.18) 0.250 (6.35) 0.267 (6.78) 0.266 (6.76) 0.266 (6.76) 0.267 (6.78) 1.562 (39.67) 3.562 (90.47) 3.092 (78.54) 3.500 (88.90) 3.400 (101.60) 2.812 (71.42) 3.311 (84.10) 5.75 (146.05) 5.75 (146.05) 5.625 (142.88) 7.591 (192.81) 9.593 (243.66) 10.843 (275.41) 9.466 (240.44) TERMINAL DESIGNATION OPTIONAL STANDARD (QUICK CONNECT) 06 15 06 15 06 15 06 15 06 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 20 15 21 - TERMINAL DIMENSIONS in inches (millimeters) DIMENSIONS A D C Styles 06, 20, 21 Revision: 03-Jun-16 A D C B Style 15 B TERMINAL STYLE 06 15 20 21 A 0.250 (6.35) 0.250 (6.35) 0.375 (9.53) 0.500 (12.70) B 0.500 (12.70) 0.594 (15.08) 0.5625 (14.28) 0.625 (15.87) C (HOLE DIAMETER) 0.173 (4.39) 0.065 (1.65) 0.204 (5.18) 0.264 (6.70) D 0.020 (0.51) 0.031 (0.79) 0.032 (0.812) 0.025 (0.64) Document Number: 31842 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FVE www.vishay.com Vishay Huntington MOUNTING HARDWARE FOR FVE PRODUCTS - Dimensions in inches (millimeters) 91 = 100 Style Horizontal 1 High Bracket MOUNTING HARDWARE AVAILABLE BRACKET TYPES BY MODEL B 0.046 (1.17) 91 = 100 STYLE HORIZONTAL 1 HIGH BRACKET 92 = 200 STYLE PUSH-IN BRACKET 93 = 300 STYLE THRU-BOLT BRACKET FVE0050 102 206 302 GLOBAL MODEL H C Core length plus “X” BRACKET TYPE X Y Z H MOUNTING SLOT C B FVE0090 102 204 302 102 1.063 0.750 0.859 1.250 0.219 x 0.438 0.750 1.750 (26.99) (19.05) (21.83) (31.75) (5.56 x 11.11) (19.05) (44.75) FVE0100 102 206 302 103 1.063 1.250 1.000 1.500 0.281 x 0.563 0.927 2.125 (26.99) (31.75) (25.40) (38.10) (7.14 x 14.29) (23.55) (53.98) FVE0110 102 206 302 FVE0120 102 206 302 FVE0140 103 205 303 FVE0155 103 207 302 FVE0165 102 206 303 FVE0180 102 206 303 FVE0240 103 207 302 FVE0300 103 207 303 FVE0375 103 207 303 FVE0420 103 207 303 FVE0500 103 - 302 92 = 200 Style Push-In Bracket Z Y BRACKET TYPE H Core length plus “X” X H Y Z HOLE (DIA.) 204 0.700 (17.78) 0.578 (14.68) 0.250 (6.35) 0.500 (12.70) 0.156 (3.96) 206 0.846 (21.49) 0.800 (20.62) 0.375 (9.53) 0.600 (15.24) 0.343 x 0.213 (8.71 x 5.46) 207 0.700 (17.78) 1.125 (28.58) 0.500 (12.70) 0.687 (17.45) 0.250 x 0.188 (6.35 x 4.78) 93 = 300 Style Thru-Bolt Bracket BRACKET TYPE X (APPROXIMATE) THREAD 302 0.271 (6.88) 10-32 303 0.463 (11.76) 1/4-20 Revision: 03-Jun-16 Document Number: 31842 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 FVE www.vishay.com Vishay Huntington TECHNICAL SPECIFICATIONS PARAMETER UNIT RESISTOR CHARACTERISTICS Power Rating W 50 to 500 Resistance Range 0.10 to 46.2 Resistance Tolerance % 10 Temperature Coefficient ppm/°C ± 260 for 20 and above, ± 400 for 1 to 19.99 Operating Temperature °C -55 °C to 350 °C Temperature Rise °C 325 °C above an ambient of 25 °C Maximum Altitude f.a.s.l. 10 000 Short-Term Overload - 10x rated power for 5 s Surge Windings - Available Maximum Working Voltage - (P x R)0.5 1M VRMS 1000 VAC Creepage - Varies by wattage, see “Terminal Setback” in Dimensions table Terminal Sleeves - n/a μH Varies by wattage and resistance Insultation Resistance Dielectric Voltage Inductance Non-Inductive Winding - n/a Terminal Strength lb 10 lbs Electrical or Mechanical Customization - Contact factory: [email protected] MATERIAL SPECIFICATIONS Element Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core Cordierite, steatite Coating Special high temperature vitreous enamel Standard Terminals Tinned alloy 42 Optional Terminals Alloy 42 Terminal Bands Alloy 42 Part Marking HEI, model, wattage, value, tolerance, date code RATED POWER IN % DERATING 120 100 80 60 40 20 0 0 50 100 150 200 250 300 350 25 AMBIENT TEMPERATURE IN °C Revision: 03-Jun-16 Document Number: 31842 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000