E/H (T-Level) (Military M/D55342) Datasheet

E/H (T-Level) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
QPL MIL-PRF-55342 Qualified Thin Film Resistor,
Surface Mount Chip
FEATURES
•
•
•
•
•
Thin Film MIL-PRF-55342 established reliability “T” level
chip resistors feature a thin film resistor element and with all
sputtered wraparound terminations that provide excellent
adhesion and dimensional uniformanity. They are ideal in
applications requiring stringent performance requirements.
Established reliability is assured through 100 % screening
and extensive environmental testing for every lot that
includes complete 100 % group A, power conditioning and
group B lot testing performed for T-level product assurance.
T-level (space) qualified
Passes outgassing requirements of ASTM-E595
TCR to ± 25 ppm/°C
Tolerances to ± 0.1 %
100 % power conditioning
TYPICAL PERFORMANCE
ABSOLUTE
TCR
25
TOL.
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
SPECIFICATIONS
Material
Resistance Range
TCR: Absolute
CONDITIONS
Tamelox resistor film (passivated nichrome)
-
10  to 6.19 M(size dependent)
-
25 ppm/°C (E), 50 ppm/°C (H)
-55 °C to +125 °C
Tolerance: Absolute
± 0.1 %
+25 °C
Stability: Absolute
R ± 0.02 %
2000 h at +70 °C
Voltage Coefficient
< 0.1 ppm/V
-
Working Voltage
40 V to 125 V
-
Operating Temperature Range
-55 °C to +150 °C
-
Storage Temperature Range
-55 °C to +150 °C
-
< - 25 dB
-
Thermal EMF
< 0.1 μV/°C
-
Shelf Life Stability: Absolute
R ± 0.01 %
1 year at +25 °C
Noise
COMPONENT RATINGS
RESISTANCE RANGE () BY CHARACTERISTICS TOLERANCE
CASE SIZE
MAX.
WORKING
VOLTAGE
(V)
M55342X01
40
50
20 to 150K
22 to 150K
49.9 to 150K
51 to 150K
M55342X02
40
125
20 to 301K
20 to 300K
49.9 to 301K
51 to 300K
M55342X03
75
200
10 to 649K
10 to 649K
49.9 to 649K
51 to 680K
M55342X04
125
150
10 to 1.69M
10 to 1.69M
49.9 to 1.69M
51 to 1.80M
M55342X05
175
225
10 to 3.16M
10 to 3.30M
49.9 to 3.16M
51.0 to 3.30M
M55342X06
50
150
10 to 475K
10 to 470K
49.9 to 475K
51 to 470K
D55342X07
100
250
10 to 1.50M
10 to 1.50M
49.9 to 1.50M
51 to 1.50M
M55342X08
150
800
10 to 4.02M
10 to 3.90M
49.9 to 4.02M
51.0 to 3.90M
M55342X09
200
1000
10 to 6.19M
10 to 6.20M
49.9 to 6.19M
51.0 to 6.20M
M55342X10
75
500
49.9 to 1.00M
51 to 1.00M
49.9 to 1.00M
51 to 1.00M
M55342X11
30
50
20 to 100K
22 to 100K
49.9 to 100K
51 to 100K
M55342X12
50
100
10 to 258K
10 to 261K
49.9 to 258K
49.9 to 261K
Revision: 04-May-16
POWER
RATING
(mW)
H, K, L, M
(0.1 %, 0.25 %, 0.5 %)
H, K, L, M
(1 %, 2 %, 5 %)
E
(0.1 %, 0.25 %, 0.5 %)
E
(1 %, 2 %, 5 %)
Document Number: 60060
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (T-Level) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
E
L
CASE SIZE
M55342X01
M55342X02
M55342X03
M55342X04
M55342X05
M55342X06
D55342X07
M55342X08
M55342X09
M55342X10
M55342X11
M55342X12
TERM.
B
B
B
B
B
B
B
B
B
B
B
B
L
0.055 ± 0.006
0.055 ± 0.006
0.105 ± 0.007
0.155 ± 0.007
0.230 ± 0.007
0.080 ± 0.006
0.126 ± 0.008
0.209 ± 0.009
0.259 + 0.009 / - 0.015
0.105 ± 0.007
0.042 ± 0.008
0.064 ± 0.006
W
0.025 ± 0.005
0.050 ± 0.005
0.050 ± 0.005
0.050 ± 0.005
0.075 ± 0.005
0.050 ± 0.005
0.063 ± 0.005
0.098 ± 0.005
0.124 ± 0.005
0.100 ± 0.005
0.022 ± 0.005
0.032 ± 0.005
T
0.010 / 0.033
0.012 / 0.033
0.015 / 0.033
0.015 / 0.033
0.015 / 0.033
0.015 / 0.033
0.015 / 0.033
0.015 / 0.033
0.015 / 0.033
0.015 / 0.033
0.010 / 0.033
0.010 / 0.033
D
E
0.010
0.015
0.010
0.015
0.015
0.015
0.015
0.015
0.020
0.020
0.016 ± 0.008
0.015
0.020 + 0.005 / - 0.010
0.020
0.020
0.020
0.020
0.015
0.015
0.010
0.010
0.012
0.015
ENVIRONMENTAL TESTS
MIL-PRF-55342 LIMITS
(R ±)
0.10 %
0.10 %
0.10 %
0.10 %
0.20 %
0.20 %
± 25 ppm/°C
0.05 %
2.00 %
ENVIRONMENTAL TEST
Thermal Shock
Low Temperature Operation
Short Time Overload
High Temperature Exposure
Resistance to Bonding
Moisture Resistance
TCR
Life (2000 h at + 70 °C)
Life (10 000 h at + 70 °C)
VISHAY PERFORMANCE
(R ±)
0.02 %
0.03 %
0.05 %
0.01 %
0.01 %
0.04 %
< 15 ppm/°C
0.02 %
0.04 %
MECHANICAL SPECIFICATIONS
Resistive Element
Substrate Material
Chip Terminations
Fused Solder
Tamelox
Alumina
Solder over nickel
Plated solder SN 90/10
Percent of Rated Wattage
DERATING
100
80
60
40
20
0
-75
-50
-25
0
25
50
75
100
125
150
175
Ambient Temperature °C
Revision: 04-May-16
Document Number: 60060
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
E/H (T-Level) (Military M/D55342)
www.vishay.com
Vishay Dale Thin Film
GLOBAL PART NUMBER INFORMATION
Global Part Numbering: M55342E06B1C00TTS
M
5
5
MODEL
TCR
CHARACTERISTIC
M55342
or
D55342
(/07 size
only)
E = 25 ppm/°C
H = 50 ppm/°C
K = 100 ppm/°C (1)
L = 200 ppm/°C
M = 300 ppm/°C (1)
3
4
CASE
SIZE
2
E
0
TERMINATION
7
B
1
C
0
0
PRODUCT
LEVEL
DESIGNATOR
OHMIC VALUE
01 = 0502 B = Solderable Three digits and a letter. Letter
02 = 0505
identifies tolerance, acts as
03 = 1005
multiplier and decimal locator.
04 = 1505
MULTIPLIER
05 = 2208
Tolerance 1  1 k 1 M
06 = 0705
07 = 1206
0.1 %
A
B
C
08 = 2010
0.25 %
R
U
V
09 = 2512
10 = 1010
0.5 %
W
Y
Z
11 = 0402
1%
D
E
F
12 = 0603
2%
G
H
T
5%
J
K
L
10 %
M
N
P
T=
Space level
T
T
S
V
PACKAGING
VENDOR
BS = BULK
1 min., 1 mult

WAFFLE PACK
WS = WAFFLE
25 min., 1 mult
WI = 25 min., 1 mult
(item single lot date code)
WP = 25 min., 1 mult
(package unit single lot 
date code)
W0 = 100 min.,100 mult

TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 25 min., 1 mult
TI = 25 min., 1 mult
(item single lot date code)
TP = 25 min., 1 mult
(package unit single lot 
date code)
V=
Vishay
Thin
Film (1)
M=
Part
marked (2)
Notes
(1) For K, L and M TCR  1 % tolerance add a V at end of part number to specify Vishay Thin Film vs. Dale Thick Film.
E.g.: M55342K06B1F00TWSV
(2) Option 1 marking only case size 02 not available. Part marking available on the following: 0705, 1005, 1206, 1505, 2010. 2208, 2512.
Revision: 04-May-16
Document Number: 60060
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000