P-NS Datasheet

P-NS
www.vishay.com
Vishay Dale Thin Film
Commercial Thin Film Resistor, Surface Mount Chip
FEATURES
Actual Size
0505
For applications requiring low noise, stability, low
temperature coefficient of resistance, and low voltage
coefficient, all Vishay’s proven precision thin film
wraparound resistors will meet your exact requirements.
Manufactured with the same material and processes as QPL
and manufactured in a QPL facility.
CONSTRUCTION
SPM Passivation
Enhancement
Passivated Nichrome
Resistive Film
Solder
Coating
• Moisture resistant (SPM) special passivation
method
Available
• Non-standard values available
• Pre-tinned terminations over nickel barrier
Available
(gold available)
• Very low noise and voltage coefficient
(< -35 dB, 0.1 ppm/V)
Available
• Non-inductive
• Laser-trimmed tolerances to 0.02 %
Available
• In-lot tracking less than 5 ppm/°C
• Epoxy bondable termination available
• Sulfur resistant (per ASTM B809-95 humid vapor test)
• Flame resistant UL 94 V-0
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
* This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
Nickel Barrier
High Purity
Alumina Substrate
Adhesion Layer
TYPICAL PERFORMANCE
ABSOLUTE
TCR
TOL.
25
0.1
STANDARD ELECTRICAL SPECIFICATIONS
TEST
Material
Resistance Range
TCR: Absolute
Tolerance: Absolute
Stability: Absolute
Stability: Ratio
Voltage Coefficient
Working Voltage
Operating Temperature Range
Storage Temperature Range
Noise
Shelf Life Stability: Absolute
SPECIFICATIONS
Passivated nichrome
10  to 6.19 M
± 10 ppm/°C to 100 ppm/°C
± 0.02 % to ± 5 %
R ± 0.02 %
0.1 ppm/V (typical)
75 V to 200 V
-55 °C to +155 °C
-55 °C to +155 °C
< -35 dB (typical)
R ± 0.01 %
CONDITIONS
-55 °C to +125 °C
+25 °C
2000 h at 70 °C
1 year at +25 °C
COMPONENT RATINGS
CASE SIZE (1)
POWER RATING
(mW)
50
100
150
150
250
250
250
500
400
400
800
800
1000
WORKING VOLTAGE
(V)
75
75
75
75
100
100
100
150
200
150
150
200
200
0402
0502
0505
0603
0705
0805
1005
1010
1206
1505
2208
2010
2512
Notes
(1) 0705 and 0805 are the same (only use 0805 when ordering)
(2) Values > 1M best TCR ± 25 ppm/°C
Revision: 02-May-16
RESISTANCE RANGE ()
 0.1 %
< 0.1 %
24.9 to 100K
250 to 100K
20 to 150K
250 to 150K
20 to 301K
250 to 301K
10 to 261K
250 to 261K
10 to 475K
250 to 475K
10 to 475K
250 to 475K
10 to 649K
250 to 649K
50 to 1M
250 to 1M
250 to 1M
10 to 1.5M (2)
10 to 1M
250 to 1M
250 to 1M
10 to 3.16M (2)
250 to 1M
10 to 4.02M (2)
250 to 1M
10 to 6.19M (2)
Document Number: 60023
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
P-NS
www.vishay.com
Vishay Dale Thin Film
DIMENSIONS in inches
D
W
T
L
E
CASE SIZE
TERM
L
W
0402
B
0.042 ± 0.008
0.022 ± 0.005
0502
B
0.055 ± 0.006
0.025 ± 0.005
0505
B
0.055 ± 0.006
0.050 ± 0.005
0603
B
0.064 ± 0.006
0.032 ± 0.005
0705, 0805 (1)
B
0.080 ± 0.006
0.050 ± 0.005
1005
B
0.105 ± 0.007
0.050 ± 0.005
1010
B
0.105 ± 0.007
0.100 ± 0.005
1206
B
0.126 ± 0.008
0.063 ± 0.005
1505
B
0.155 ± 0.007
0.050 ± 0.005
2010
B
0.209 ± 0.009
0.098 ± 0.005
2208
B
0.230 ± 0.007
0.075 ± 0.005
2512
B
0.259 ± 0.009
0.124 ± 0.005
Note
(1) 0705 and 0805 are the same (only use 0805 when ordering).
T
0.012 to 0.033
0.012 to 0.033
0.012 to 0.033
0.020 max.
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
0.015 to 0.033
ENVIRONMENTAL TESTS
Thermal Shock
0.02
0.02
Short Time Overload
0.01
0.01
Low Temperature Operation
0.01
0.01
Resistance to Solder Heat
0.04
0.03
Moisture Resistance
0.02
0.01
High Temperature Exposure
0.03
0.06
Load Life (10 000 h, + 70 °C)
0.05
0.05
± 25 ppm/°C
± 25 ppm/°C
100
Precent of Rated Power
100 k R
± (%)
TCR
E
0.010 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.015 ± 0.005
0.020 + 0.005/- 0.010
0.015 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
DERATING CURVE
10 k R
± (%)
ENVIRONMENTAL TEST
D
0.010 ± 0.005
0.010 ± 0.005
0.010 ± 0.005
0.012 ± 0.005
0.016 ± 0.008
0.015 ± 0.005
0.015 ± 0.005
0.020 + 0.005/- 0.010
0.015 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
0.020 ± 0.005
80
60
40
20
0
0
70
125
155
Ambient Temperature °C
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: P-1206E1002BBTS
P
-
GLOBAL CASE
MODEL SIZE
P-
0402
0502
0505
0603
0805
1005
1010
1206
1505
2208
2010
2512
1
2
TCR
CHARACTERISTIC
Y = ± 10 ppm/°C (2)
D = ± 15 ppm/°C
E = ± 25 ppm/°C
H = ± 50 ppm/°C
K = ± 100 ppm/°C

Note
(2)  49.9 
0
6
E
1
RESISTANCE
The first 3 digits
are significant figures
and the
last digit specifies the
number of
zeros to follow.
“R” designates the
decimal point.
Example:
10R0 = 10 
1001 = 1 k
1002 = 10 k
0
TOLERANCE
0
2
B
B
TERMINATION
Q = ± 0.02 % (3) B = Wraparound
A = ± 0.05 % (3)
Sn/Pb solder
B = ± 0.1 %
63 % Sn/37 % Pb
D = ± 0.5 %
w/ nickel barrier
F = ± 1 %
G = Wraparound Au 
G = ± 2 %
over Ni (gold) 
J = ± 5 %
termination

epoxy bondable
Note
RoHS-compliant - e4
(3) For values
S = Wraparound
 250 
electroplated 100 %
pure matte tin
RoHS-compliant e3
T
S
PACKAGING
BULK
BS = 100 min., 1 mult
WAFFLE
WS = 100 min., 1 mult
W0 = 100 min.,100 mult
WI = 100 min.,1 mult (4)
WP = 100 min.,1 mult (5)
TAPE AND REEL
T0 = 100 min., 100 mult
T1 = 1000 min., 1000 mult (6)
T3 = 300 min., 300 mult
T5 = 500 min., 500 mult
TF = Full reel
TS = 100 min., 1 mult
TI = 100 min., 1 mult (4)
TP = 100 min., 1 mult (5)
Notes
(4) Item single lot date code
(5) Package unit single lot date code
(6) Preferred packaging code
Historical Part Number Example: P0805H6801BBT (for reference purposes only)
P
0805
H
6801
B
B
T
STYLE
CASE SIZE
TCR CHARACTERISTIC
OHMIC VALUE
TOLERANCE
TERMINATION
PACKAGING
Revision: 02-May-16
Document Number: 60023
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000