TRG100A Series FEATURES • • • • • • • • • Wide input voltage Continuous short circuit protection Over voltage protection Output voltage available from 12VDC to 48VDC High efficiency 85% typical Meets EN55022 Class ”B”, conducted emissions MEPS compliance, Efficiency Mark V ROHS compliance Active PFC function SPECIFICATIONS STANDARDS AND APPROVALS INPUT Safety standards Queensland Electrical Safety Office Certificate of approval Qld Q090032, AS/NZS 609050.1:2003, EN60950 120A max @ 264Vac C-tick AS/NZS CISPR 11:2002 Group 1 Isolation Input to Output 4,242Vdc EMI standards Meets EN55022 Class B and CISPR/FCC Class B Leakage current 3.5mA max. RCM Complies with AS/NZS 4417 Parts 1,2,3 N911 Output voltage Factory preset, see table (not adjustable) Dimensions 150 X 70 X 35mm Voltage set-point 60% full load Weight 600g Ripple and noise 2% p-p max AC Inlet IEC320/C14 Short circuit protection Continuous (Auto recovery) Output connector Over voltage protection Yes Hold-up time Load regulation 20ms typ @ 115Vac +/-2 to +/-4% (20% to 100% load) Model dependent +/-1% max 100Vac to 240Vac at full load Right angle, hollow barrel connector, 2.5mm inside diameter; 5.5mm outside diameter; 9.5mm length Center positive polarity. DC cord length 720mm with ferrite core 18AWG/UL1185 Voltage range 90 to 264Vac Frequency 47Hz to 63Hz Inrush current OUTPUT Line regulation EXTERNAL POWER SUPPLY 1 0 0 W AT T S - A C / D C G E N E R A L S I N G L E O U T P U T MECHANICAL SELECTION TABLE Consult Powerbox for variation of output connector and DC cord length ENVIRONMENTAL Operating temperature Load derating Storage temperature 0°C to +60°C Derate from 100% at 40°C linearly to 50% at 50°C -20°C to +85°C TECHNICAL ILLUSTRATION Doc. No. PBC9 Rev.C 28-4-11 RATED VNOM OUTPUT CURRENT MAX POWER TRG100A120- 21E11-V 12Vdc 8.34A 100W TRG100A150- 21E11-V 15Vdc 6.67A 100W TRG100A240- 21E11-V 24Vdc 4.17A 100W TRG100A480- 21E11-V 48Vdc 2.08A 100W MODEL NUMBER Powering Progress – www.powerbox.com.au 287