EXTERNAL TR45 Series 4 5 W AT T S S I N G L E O U T P U T A C / D C G E N E R A L Features • • • • • • Wide input voltage 90VAC to 264VAC, 50/60Hz Continuous short circuit protection Output voltage available from 5VDC to 48VDC High efficiency 82% typical Meets EN55022 Class ”B”, conducted emissions MEPS compliance Specifications STANDARDS AND APPROVALS INPUT Safety standards NSW Office of Fair Trading Certificate of approval NSW19568, EN60950, IEC60950, AS/NZS60950 47Hz to 63Hz C-tick AS/NZS CISPR 11:2002 Group 1, Inrush current 50A max @ 264Vac EMI standards Class B; Meets EN55022 class “B”, conducted Isolation Input to Output 4242Vdc RCM Complies with AS/NZS 4417 Parts 1,2,3 Leakage current 1.5mA max. MECHANICAL Voltage range 90 to 264Vac Frequency OUTPUT Dimensions 58x132x30mm Output voltage Factory preset, see table (not adjustable) Weight 350g Voltage set-point +/-2% to +/-4% (60% load) AC Inlet IEC320/C14 Ripple and noise 1% p-p max Output connector Short circuit protection Continuous (Auto recovery) Right angle, hollow coaxial plug, 2.5mm inside diameter; 5.5mm outside diameter; 9.5mm length Center positive polarity. Over voltage protection Option Hold-up time 8ms typ @ 115Vac Load regulation +/-2 to +/-6% (20% to 100% load) Selection Table Line regulation +/-1% max at full load MODEL NUMBER ENVIRONMENTAL Operating temperature 0°C to +40°C Storage temperature -20°C to +85°C Technical Illustration 720mm with ferrite core 18AWG/UL1185 Note: TR45A05 is 16AWG/UL1185 DC cord length RATED Vnom OUTPUT CURRENT MAX POWER TR45A05-21A11 5Vdc 6.0A 30W TR45A12-21A11 12Vdc 3.75A 45W TR45A15-21A11 15Vdc 3.0A 45W TR45A18-21A11 18Vdc 2.5A 45W TR45A19-21A11 19Vdc 2.37A 45W TR45A24-21A11 24Vdc 1.88A 45W TR45A48-21A11 48Vdc 1.0A 48W Note: MEPS compliance model number change to eg. TRG45A1221A11. Available, OCT 2007. 258