VEMD5160X01 www.vishay.com Vishay Semiconductors Silicon PIN Photodiode FEATURES • Package type: surface mount • Package form: top view • Dimensions (L x W x H in mm): 5 x 4 x 0.9 • Radiant sensitive area (in mm2): 7.5 • AEC-Q101 qualified • Daylight blocking filter matched with 850 nm to 890 nm emitters • High radiant sensitivity • Excellent Ira linearity • Fast response times DESCRIPTION VEMD5160X01 is a high speed and high sensitive PIN photodiode with a highly linear photoresponse. It is a low profile surface mount device (SMD) including the chip with a 7.5 mm2 sensitive area and a daylight blocking filter matched with IR emitters operating at wavelength 850 nm or 890 nm. • Angle of half sensitivity: ϕ = ± 65° • Floor life: 72 h, MSL 4, according to J-STD-020 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS • High speed photo detector • Small signal detection • Proximity sensors PRODUCT SUMMARY COMPONENT Ira (μA) ϕ (deg) λ0.1 (nm) VEMD5160X01 26 ± 65 700 to 1070 PACKAGE FORM Note • Test conditions see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS VEMD5160X01 Tape and reel MOQ: 1000 pcs, 1000 pcs/reel Top view VEMD5160X01-GS15 Tape and reel MOQ: 5000 pcs, 5000 pcs/reel Top view Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION Reverse voltage Power dissipation Tamb ≤ 25 °C Junction temperature SYMBOL VALUE VR 20 UNIT V PV 240 mW Tj 110 °C Operating temperature range Tamb -40 to +110 °C Storage temperature range Tstg -40 to +110 °C According to reflow solder profile fig. 8 Tsd 260 °C According to EIA / JESD51 RthJA 350 K/W ± 2000 V, 1.5 kΩ, 100 pF, 3 pulses ESDHBM ≥2 kV Soldering temperature Thermal resistance junction / ambient ESD safety HBM Rev. 1.1, 21-Mar-16 Document Number: 84279 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5160X01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT IF = 50 mA VF - 0.8 1.0 V IR = 100 μA, E = 0 V(BR) 20 - - V VR = 10 V, E = 0 Iro - 0.2 10 nA VR = 0 V, f = 1 MHz, E = 0 CD - 80 - pF Forward voltage Breakdown voltage Reverse dark current Diode capacitance VR = 3 V, f = 1 MHz, E = 0 CD - 35 40 pF Open circuit voltage Ee = 1 mW/cm2, λ = 950 nm Vo - 350 - mV Temperature coefficient of Vo Ee = 1 mW/cm2, λ = 950 nm TKVo - -2.6 - mV/K Short circuit current Ee = 1 mW/cm2, λ = 950 nm Ik - 26 - μA Temperature coefficient of Ik Ee = 1 mW/cm2, λ = 835 nm TKIk - 0.1 - %/K Ee = 1 mW/cm2, λ = 950 nm, VR = 5 V Ira 20 26 31 μA Ee = 1 mW/cm2, λ = 890 nm, VR = 5 V Ira - 38 - μA ϕ - ± 65 - deg Wavelength of peak sensitivity λp - 840 - nm Range of spectral bandwidth λ0.1 - 700 to 1070 - nm Reverse light current Angle of half sensitivity Rise time VR = 5 V, RL = 50 Ω, λ = 820 nm tr - 30 - ns Fall time VR = 5 V, RL = 50 Ω, λ = 820 nm tf - 30 - ns BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Basic characteristics graphs to be extended to 110 °C ambient temperatures where applicable. 1.4 VR = 10 V 100 10 1 0.1 0.01 0.001 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 1 - Reverse Dark Current vs. Ambient Temperature Rev. 1.1, 21-Mar-16 Ira rel - Relative Reverse Light Current Iro - Reverse Dark Current (nA) 1000 VR = 10 V 940 nm 1.2 865 nm 835 nm 1 0.8 0.6 -40 -20 0 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 2 - Relative Reverse Light Current vs. Ambient Temperature Document Number: 84279 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5160X01 www.vishay.com Vishay Semiconductors S(λ)rel - Relative Spectral Sensitivity VR = 5 V, λ = 950 nm 100 10 1 0.1 0.01 0.1 1 Ee - Irradiance 1.0 0.8 0.6 0.4 0.2 0 400 10 500 600 700 800 Fig. 3 - Reverse Light Current vs. Irradiance Fig. 6 - Relative Spectral Sensitivity vs. Wavelength Ira - Reverse Light Current (μA) λ = 950 nm 10 mW/cm2 5.0 mW/cm2 100 2.0 mW/cm2 1.0 mW/cm2 0.5 mW/cm2 10 0.2 mW/cm2 0.1 mW/cm2 0.05 mW/cm2 1 0.02 mW/cm2 0.01 mW/cm2 0.1 0.1 1 10 100 Srel - Relative Radiant Sensitivity 0° 1000 900 1000 1100 λ - Wavelength (nm) (mW/cm2) 10° 20° 30° 40° 1.0 0.9 50° 0.8 60° 70° 0.7 80° 0.6 0.4 0.2 ϕ - Angular Displacement Ira - Reverse Light Current (μA) 1000 0 VR - Reverse Voltage (V) Fig. 4 - Reverse Light Current vs. Reverse Voltage Fig. 7 - Relative Radiant Sensitivity vs. Angular Displacement 90 f = 1 MHz, E = 0 Cp - Capacitance (pF) 80 70 60 50 40 30 20 10 0 0.001 0.01 0.1 1 10 100 VR - Reverse Voltage (V) Fig. 5 - Diode Capacitance vs. Reverse Voltage Rev. 1.1, 21-Mar-16 Document Number: 84279 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5160X01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 4 Bottom view 2.1 1.8 3 5 1.8 0.2 0.1 3 0.9 ± 0.15 Optical center Optical window Top view C (20 : 1) C Tie bar, electrically connected to cathode 2 Recommended footprint 0.65 1.2 4.1 1 0.6 Cathode 0.9 1.2 0.8 1 5.2 2.5 Exposed pad (cathode) 3.1 NC 1 0.8 0.4 (4 x) Center of device 0.8 2 Anode 0.6 (4 x) Drawing- No.: 6.550-5329.01-4 Issue: 2; 03.03.2016 Rev. 1.1, 21-Mar-16 Not indicated tolerances ± 0.1 Technical drawings according to DIN specification Document Number: 84279 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5160X01 www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS in millimeters Reel-design is reperesentative for different types Unreel direction X Label posted here Ø 1.55 B-B ( 2 : 1 ) 0.3 B Ø 1.5 8 2 X Anode 1.75 B Drawing-No.: 9.800-5129.01-4; Issue: 1; 20.07.2015 Rev. 1.1, 21-Mar-16 1.42 5.5 Document Number: 84279 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMD5160X01 www.vishay.com Vishay Semiconductors SOLDER PROFILE DRYPACK 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 200 Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. FLOOR LIFE Time between soldering and removing from MBB must not exceed the time indicated in J-STD-020: max. 30 s 150 Moisture sensitivity: level 4 max. 100 s max. 120 s Floor life: 72 h 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s DRYING 0 0 19841 50 100 150 200 250 Time (s) Fig. 8 - Lead (Pb)-free Reflow Solder Profile According to J-STD-020D Rev. 1.1, 21-Mar-16 Conditions: Tamb < 30 °C, RH < 60 % 300 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or recommended conditions: 192 h at 40 °C (+ 5 °C), RH < 5 % or 96 h at 60 °C (+ 5 °C), RH < 5 %. Document Number: 84279 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000