X

LumaView®
Infrared Illuminators
SWX200
SWX75
When you require tough, mission critical monitoring in low light
Choose from three types of filters to suit your specific
or completely dark conditions, LumaView outperforms all other
application: overt illumination produces a distinct red glow that
illuminators. LumaView enables IR-sensitive CCTV cameras to
warns of the presence of IR light (715 nm), semi covert
produce high quality images under night time conditions without
illumination produces a faint red glow that can be detected with
imposing intensive, obtrusive, and visible light illumination.
a trained eye (850 nm) and full covert illumination avoids any
Designed for efficiency from top to bottom, LumaView employs
red glow, making it impossible to detect the presence of
IR-enhanced output 50 mm diameter reflectors offering
IR light (950 nm)
maximum output, reliability, and bulb life. The large area heat
Modular and versatile, LumaView is available with bulbs in three
sink causes excess heat to be quickly conducted away from the
distinct configurations and filters for three illumination settings.
base of the bulbs, prolonging bulb life to greater than 4000
Since the filter and bulbs are independent of one another,
hours. A required external power supply comes with a built-in
should one fail, then only one needs to be replaced without total
photocell that detects changes in ambient light level. When
loss of illumination (SWX200 only).
conditions grow dark, it switches on the IR illuminator, offering
Use LumaView anywhere night time surveillance is required and
longer bulb life.
normal lighting is too expensive or prohibited. Applications
include: military, law enforcement, perimeter security, prisons,
airports, traffic monitoring, customs agencies, facility monitoring
and schools.
FEATURES
•
Enables IR sensitive cameras to
produce quality images under
nighttime conditions
•
Filters available for three illumination
settings, from overt–visible light to
covert–invisible light
•
Bulbs available in three distinct
configurations: spot, medium flood
and flood beam
•
Replace bulbs and filters without any
loss of illumination (SWX200 only)
•
Push-on rubber molds ease filter
replacement
•
Excess heat is conducted away from
the bulbs, prolonging bulb life
•
Standard filters are interchangeable
between illuminators
•
Combine different bulbs and filters
(SWX200) for beam flexibility
•
Weather sealed for indoor or
outdoor use
•
Power supply (ordered separately)
has built-in photocell that detects
changes in ambient light level
LumaView®
Infrared Illuminators
SPECIFICATIONS
SWX75
SWX200
Recommended Use:
Indoor/Outdoor
Weight:
Dimensions: (DxW)
2.25 lb (1.0 kg)
5.51 lb (2.5 kg)
3.44 in. x 5.52 in. (87 mm x140 mm)
6.0 in. x 5.0 in. (153 mm x 127 mm)
Construction/Colour:
Machined Aluminum/Black
Volts Required:
12 VAC (nominal 6 amps)
Power Connection:
12 VAC (nominal 18 amps)
Via 3 pin waterproof connector at rear
Bulb Power:
Illumination Distance: (715 spot)
75 W
50 W (x4) Total 200 W
295 ft. (90 m)
460 ft. (140 m)
Normal Bulb Life:
> 4000 hrs.
Filters:
715 nm, 850 nm and 950 nm — A heat barrier glass is fitted between the bulb and filter
Bulbs:
50 mm diameter, 75 watt IR
4 x 50 mm diameter, 50 watt IR
Enhanced integral reflector bulbs in spot (15°),
Enhanced integral reflector bulbs in spot (10°),
medium (25°) or flood (40°) configuration
medium (24°) or flood (60°) configuration
Enclosure Protection:
IP66
Recommended Power Supply Input
110 VAC 60 Hz or 240 VAC 50 Hz
Recommended Power Supply Photo Cell
Dusk/dawn auto switching
NOTE: Distances that you can expect to achieve using the SWX75 and SWX200 depend on the performance of the camera's spectral response and
lenses as well as the reflectivity of the scene. These illuminators are designed for cameras with sensitivity in the IR spectrum.
Power supplies: (order separately)
ORDERING
SWX75 S 7 1
LPS75-1
Power Supply, Single Lamp System, 12 VAC (nominal 6 A)
Filter
LPS75-2
Power Supply, Double Lamp System, 12 VAC (nominal 12 A)
1 715 nm
2 850 nm
3 950 nm
LPS200-1
Power Supply, Single Lamp System, 12 VAC (nominal 18 A)
LPS200-2
Power Supply, Double Lamp System, 12 VAC (nominal 36 A)
Power
Accessories:
5 50 W (200W MAX.)
7 75W (75W MAX.)
Beam Pattern
S Spot
M Medium Flood
F Flood
50W
10º
24º
60º
75W
15º
25º
40º
Housing
SWX75
SWX200
SWX715
SWX850
715nm Overt Filter
850nm Semi-Covert Filter
SWX950
950nm Covert Filter
SWXB75S
75 W bulb with 15° Spot beam pattern
SWXB75M
75 W bulb with 25° Medium Flood beam pattern
SWXB75F
75 W bulb with 40° Flood beam pattern
SWXB50S
50 W bulb with 10° Spot beam pattern
SWXB50M
50 W bulb with 24° Medium Flood beam pattern
LumaView® is a registered trademark of Honeywell International Inc.
Design and specifications subject to change without notice.
Honeywell Video Systems
Honeywell
171 Eileen Way
Syosset, NY 11791
800 796 CCTV
www.honeywell.com
L/LVIEW/D
February 2005
©2005 Honeywell International Inc.