MR www.vishay.com Vishay Sfernice Resistor Networks Metal Film Technology FEATURES • • • • RCMA 02 metal film RCMX 02 metal film Temperature range - 55 °C to + 125 °C Tolerance and/or temperature coefficient Tolerance tracking 0.1 % between two resistors TCR tracking 2 ppm/°C between two resistors • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Please consult Vishay Sfernice for special requirements. DIMENSIONS in millimeters (inches) L 4.3 ± 0.2 (0.169 ± 0.007) SERIES MR3.. MR4.. MR5.. MR7.. MR11.. S = 2.54 (0.100) 8.6 11.5 13.6 19.7 28.8 A = 5.08 (0.200) (1) 13.6 19.7 11 ± 1 (0.433 ± 0.039) 12.5 MIN. (0.492) S er A Ø6 (0.024) Lead spacing: 2.54 OR 5.08 (0.100) OR (0.200) On request Note (1) On request STANDARD ELECTRICAL SPECIFICATIONS MODEL RESISTANCE RANGE POWER RATING P70 °C W ABSOLUTE TOLERANCE ±% RATIO TOLERANCE ±% ABSOLUTE TCR ± ppm/°C RATIO TCR ± ppm/°C 0.1 to 10M 0.1 0.1 to 5 0.1, 0.05, 0.02, 0.01 5 to 50 1, 2 MR ELECTRICAL SPECIFICATIONS (PER RESISTOR) Maximum Power Rating Per Packaging Number of resistors x 0.1 W AVAILABLE CONFIGURATIONS RESISTOR NETWORKS S SERIES ATTENUATORS T 1 Revision: 05-Aug-13 PARALLEL U 3 2 E INDEPENDENT P PARALLEL + COMMON O (BALANCED Pi) 2 3 1 4 1 4 2 H (BALANCED T) 4 3 1 2 3 Document Number: 52018 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MR www.vishay.com Vishay Sfernice PACKAGED CONFIGURATIONS Standard models - consult Vishay Sfernice for special configuration requirements 2 RESISTOR NETWORKS MR32P MR32S MR42E R1 R1 MR43P MR43S or U 3 RESISTOR NETWORKS R2 R2 MR33P or T R1 R2 R3 R1 4 RESISTOR NETWORKS R2 R3 MR54P MR54S R1 5 RESISTOR NETWORKS R2 R3 MR44P R4 MR55P R1 R2 R3 R4 R5 6 RESISTOR NETWORKS MR76P MR76S R1 R2 R3 R4 R5 R6 R1 R2 R3 R4 R5 R6 MR77P 7 RESISTOR NETWORKS R1 R2 R3 R4 R5 R6 R7 10 RESISTOR NETWORKS MR1110S MR1110P R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R1 R2 R3 11 RESISTOR NETWORKS R4 R5 R6 R7 R8 R9 R10 MR1111P R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 Revision: 05-Aug-13 Document Number: 52018 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MR www.vishay.com Vishay Sfernice ORDERING INFORMATION ATTENUATORS MR 3 3 T S 20B 50U 1% K3 e2 LEAD NUMBER NUMBER OF CONFIGURATION LEAD ATTENUATION IMPEDANCE TOLERANCE TEMPERATURE COEFFICIENT (Pb)-FREE OF LEADS RESISTORS SPACING RANGE PER RESISTIVE S standard: 2.54 (0.100) ELEMENT A on request: 5.08 (0.200) RESISTORS NETWORKS MRC 9 8 P S 50U XXX e2 MODEL NUMBER OF LEADS NUMBER OF RESISTORS CONFIGURATION LEAD SPACING APPLICABLE LEAD (Pb)-FREE S standard: 2.54 (0.100) A on request: 5.08 (0.200) Only when the ohmic value is the same for all resistors SPECIAL REQUEST, TRACKING MATCHING P = Parallel S = Serie SAP PART NUMBERING GUIDELINES ATTENUATORS M 33 T S 500 2R0 F H MODEL SIZE CONFIGURATION LEAD SPACING IMPEDANCE ATTENUATORS TOLERANCE TEMPERATURE COEFFICIENT RESISTORS NETWORKS MRC 98 P S 500 XXX MODEL SIZE CONFIGURATION LEAD SPACING OHMIC VALUE SPECIAL REQUEST GLOBAL PART NUMBER INFORMATION M GLOBAL MODEL MRC R C 9 8 S S 2 2 K 6 SIZE CONFIG LEAD SPACING OHMIC VALUE 32 43 54 76 ... S P E S A The first four digits are significant figures and the last digit specifies the number of zeros to follow. R designates decimal point. SPECIAL REQUEST XXX 13001 = 13 k 22601 = 22.6 k 220R0 = 220 1R220 = 1.22 Revision: 05-Aug-13 Document Number: 52018 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000