NOMC www.vishay.com Vishay Dale Thin Film Molded, 50 mil Pitch, Dual-In-Line Thin Film Resistor, Narrow Body, Surface Mount Network FEATURES • Standard 14 pins and 16 pins counts (0.150" narrow body) JEDEC MS-012 variation AB and AC Available • Rugged molded case construction Actual Size Available • Excellent long term ratio stability (R ± 0.015 %) • Low TCR tracking ± 5 ppm/°C The NOMC series features a standard 14 pins and 16 pins narrow body (0.150") small outline surface mount style. It can accommodate resistor networks to your particular application requirements. The networks can be constructed with passivated nichrome (standard), or tantalum nitride (1) resistor films to optimize performance. Note (1) Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on datasheet, consult factory. • Isolated and bussed schematics • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. TYPICAL PERFORMANCE ABSOLUTE TCR TOL. TRACKING 25 5 ABSOLUTE RATIO 0.10 0.05 SCHEMATICS NOMC1401 or NOMCT1401 NOMC1403 or NOMCT1403 NOMC1601 or NOMCT1601 NOMC1603 or NOMCT1603 The 01 circuit provides a choice of 13 or 15 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. The 03 circuit provides a choice of 7 or 8 equal value resistors each connected between a common lead (14 or 16). Custom schematics available. STANDARD RESISTANCE OFFERING (Equal Value Resistors) ISOLATED (03) SCHEMATIC BUSSED (01) SCHEMATIC 1 k 1 k 2 k 5 k 5 k 10 k 10 k 20 k 20 k 25 k 50 k 100 k Note • Consult factory for additional values Revision: 11-Apr-14 Document Number: 60007 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NOMC www.vishay.com Vishay Dale Thin Film STANDARD ELECTRICAL SPECIFICATIONS TEST Material SPECIFICATIONS CONDITIONS Passivated nichrome (standard) Tantalum nitride (available upon request) - Pin/Lead Number Resistance Range 14, 16 - 100 to 50 k each resistor (bussed (01) schematic) - 100 to 100 k each resistor (isolated (03) schematic) TCR: Absolute ± 25 ppm/°C (standard) - 55 °C to + 125 °C TCR: Tracking ± 5 ppm/°C (typical) - 55 °C to + 125 °C ± 0.10 % to ± 1 % + 25 °C ± 0.025 % to ± 0.1 % + 25 °C Tolerance: Absolute Tolerance: Ratio 100 mW ((typical) (03) schematic) Power Rating: Resistor Maximum at + 70 °C 50 mW ((01) schematic) Power Rating: Package 400 mW/500 mW Maximum at + 70 °C Stability: Absolute R ± 0.05 % 2000 h at + 70 °C Stability: Ratio R ± 0.015 % 2000 h at + 70 °C Voltage Coefficient < 0.1 ppm/V Working Voltage - 100 V max. not to exceed P x R - Operating Temperature Range - 55 °C to + 125 °C Storage Temperature Range - 55 °C to + 150 °C - - 30 dB - Noise Thermal EMF - 0.08 μV/°C - Shelf Life Stability: Absolute R ± 0.01 % 1 year at + 25 °C Shelf Life Stability: Ratio R ± 0.002 % 1 year at + 25 °C DIMENSIONS AND IMPRINTING in inches and millimeters DIMENSION H E Index Area PIN 1 Locator h x 45° O C e A B L A1 14 16 INCHES MILLIMETERS INCHES MILLIMETERS H 0.235 5.969 0.235 5.969 E 0.154 3.911 0.154 3.91 O 0.340 8.363 0.390 9.906 A 0.063 1.60 0.063 1.60 e 0.050 1.270 0.050 1.270 B 0.015 0.381 0.015 0.381 C 0.008 0.203 0.008 0.203 L 0.025 0.635 0.025 0.635 A1 0.006 0.152 0.006 0.152 h 0.015 0.381 0.015 0.381 MECHANICAL SPECIFICATIONS Resistive Element Substrate Material Body Terminals Lead (Pb)-free Option Passivated nichrome Silicon Molded epoxy Copper alloy 100 % matte tin Tin Lead Option Sn90 Tin Lead and Lead (Pb)-free Finish Plated Note • Available upon request. Resistance value range and performance differs from passivated nichrome standard electrical specifications on datasheet, consult factory. Revision: 11-Apr-14 Document Number: 60007 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 NOMC www.vishay.com Vishay Dale Thin Film ORDERING INFORMATION CHECK LIST (Customs) Special requirements should be identified in advance, but as a minimum, you should have the following information ready. ELECTRICAL MECHANICAL 1. Maximum allowable seated height (from PC board to top of network) 2. Special marking concerns 3. Schematic pin out of package 1. Resistors, by value and tolerance 2. Reference resistor(s) and matching of which resistors to which reference resistors 3. Reference by ratio 4. Absolute temperature coefficient of resistivity 5. Temperature tracking of subordinate resistors to reference resistor(s) 6. Maximum operating voltage 7. Resistor power ratings 8. Operating temperature range GLOBAL PART NUMBER INFORMATION New Global Part Numbering: NOMC16031002BUF N N O M C 1 6 0 3 1 0 0 2 B U F O M C T 1 4 0 3 1 0 0 3 Z T 1 GLOBAL MODEL (4 or 5 digits) PINS SCHEMATIC RESISTANCE NOMC (Tin Lead) 14 16 01 = 13 or 15 bussed equal value resistors 03 = 7 or 8 isolated equal value resistors First 3 digits are significant figures and the last digit specifies the number of zeros to follow. NOMCT (Lead (Pb)-free) (e3) Example: 1002 = 10K 1003 = 100K TOLERANCE AND RATIO TOLERANCE Abs. Tol. A = 0.1 % (1) B = 0.1 % C = 0.25 % D = 0.5 % F = 1 % Z = 0.1 % (1) Ratio 0.05 % 0.1 % 0.1 % 0.1 % 0.5 % 0.025 % PACKAGING TAPE AND REEL T0 = 100 min., 100 mult T1 = 1000 min., 1000 mult (2) T3 = 300 min., 300 mult T5 = 500 min., 500 mult TF = Full reel 2500 TS = 100 min., 1 mult UF = TUBED Historical Part Number example: NOMC16031002Z (for reference purposes only) NOMC 16 03 1002 Z SERIES PINS SCHEMATIC RESISTANCE TOLERANCE AND RATIO TOLERANCE Notes (1) Tolerance available 1K and up (2) Preferred packaging code Revision: 11-Apr-14 Document Number: 60007 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000