MCN www.vishay.com Vishay Techno Thick Film Capacitor Networks, Single-In-Line, Molded SIP FEATURES • Isolated and bussed schematics available Available • Custom schematics available • NP0 or X7R capacitors for line terminator • Wide operating (- 55 °C to 125 °C) temperature range Available • Molded epoxy case • Solder coated copper terminals • Solderability per MIL-STD-202 method 208E • Marking resistance method 215 to solvents per MIL-STD-202 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details. STANDARD ELECTRICAL SPECIFICATIONS MODEL CAPACITANCE RANGE NP0 (1) X7R CAPACITANCE TOLERANCE (2) ±% CAPACITANCE VOLTAGE VDC 01 33 pF to 3900 pF 470 pF to 0.1 μF 10, 20 50 02 33 pF to 3900 pF 470 pF to 0.1 μF 10, 20 50 09 33 pF to 3900 pF 470 pF to 0.1 μF 10, 20 50 SCHEMATIC MCN Notes (1) NP0 capacitors may be substituted for X7R capacitors (2) Tighter tolerances available on request GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MCN0801N101KTB (preferred part number format) M GLOBAL MODEL MCN C N 0 8 0 1 PIN COUNT SCHEMATIC CHARACTERISTICS 08 = 8 pin 09 = 9 pin 10 = 10 pin 01 02 09 N = NP0 X = X7R N 1 CAPACITANCE VALUE (in picofarads) 2 digit significant figure, followed by a multiplier 101 = 100 pF 392 = 3000 pF 104 = 0.1 μF 0 1 K B TERMINAL FINISH TOLERANCE K = 10 % M = 20 % T PACKAGING T = Sn90/Pb10 C= Sn95.5/Ag3.9/Cu0.6 B = Bulk Historical Part Numbering: MCN0801101KS10 (will continue to be accepted) MCN 08 01 101 K S10 HISTORICAL MODEL PIN COUNT SCHEMATIC CAPACITANCE VALUE TOLERANCE TERMINAL FINISH Revision: 09-Mar-11 Document Number: 68004 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 MCN www.vishay.com Vishay Techno SCHEMATICS DIMENSIONS in inches (millimeters) SCHEMATIC 01 A C C C C C B 1 2 3 4 n-1 Pin #1 Identifier n (Seating Plane) 0.020 ± 0.002 (0.508 ± 0.051) SCHEMATIC 02 C C C 0.020 ± 0.002 (0.508 ± 0.051) 0.125 ± 0.015 (3.18 ± 0.381) C 1 2 3 4 9 10 SCHEMATIC 09 C 1 C 2 C 3 C 4 0.150 ± 0.010 (3.81 ± 0.254) n-1 0.100 ± 0.005 (2.54 ± 0.127) Non-Cumulative 0.010 ± 0.002 (0.254 ± 0.051) NUMBER OF PINS A ± 0.010 (0.254) B ± 0.010 (0.254) C ± 0.010 (0.254) 8 0.780 (19.81) 0.325 (8.26) 0.040 (1.02) 9 0.940 (23.88) 0.246 (6.25) 0.075 (1.91) 10 1.040 (26.42) 0.316 (8.03) 0.075 (1.91) n Note • Custom schematics available Revision: 09-Mar-11 Document Number: 68004 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000