MCN Vishay Techno Capacitor Networks, Molded SIP FEATURES • • • • • • • Custom schematics available NP0 or X7R capacitors for line terminator Wide operating temperature range (- 55 °C to 125 °C) Molded epoxy case Solder coated copper terminals Solderability per MIL-STD-202 method 208E Marking resistance to solvents per MIL-STD-202 method 215 STANDARD ELECTRICAL SPECIFICATIONS MODEL CAPACITANCE RANGE X7R NP0 (1) 33 pF - 3900 pF 470 pF - 0.1 µF 33 pF - 3900 pF 470 pF - 0.1 µF 33 pF - 3900 pF 470 pF - 0.1 µF SCHEMATIC 01 02 09 MCN CAPACITANCE TOLERANCE (2) ±% ± 10 %, ± 20 % ± 10 %, ± 20 % ± 10 %, ± 20 % CAPACITANCE VOLTAGE VDC 50 50 50 Notes (1) NP0 capacitors may be substituted for X7R capacitors (2) Tighter tolerances available on request SCHEMATICS DIMENSIONS in inches [millimeters] 0.150 ± 0.010 [3.81 ± 0.254] SCHEMATIC 01 A C C C C C B 1 2 3 4 n-1 C (Seating Plane) 0.020 ± 0.002 [0.508 ± 0.051] SCHEMATIC 02 C Pin #1 Identifier n C 0.020 ± 0.002 [0.508 ± 0.051] 0.125 ± 0.015 [3.18 ± 0.381] 1 2 3 4 9 C 10 SCHEMATIC 09 C 1 C 2 C 3 C 4 n-1 n 0.100 ± 0.005 [2.54 ± 0.127] Non-Cumulative 0.010 ± 0.002 [0.254 ± 0.051] NUMBER OF PINS A ± 0.010 [0.254] B ± 0.010 [0.254] C ± 0.010 [0.254] 5 0.620 [15.75] 0.305 [7.75] 0.110 [2.79] 8 0.780 [19.81] 0.325 [8.26] 0.040 [1.02] 9 0.940 [23.88] 0.246 [6.25] 0.075 [1.91] 10 1.040 [26.42] 0.346 [8.79] 0.075 [1.91] Note • Custom schematics available GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MCN0801N101KTB (preferred part number format) M GLOBAL MODEL C N 0 PIN COUNT SCHEMATIC MCN 05 = 5 pin 08 = 8 pin 09 = 9 pin 10 = 10 pin 01 02 09 8 0 1 N 1 CHARACTERISTICS CAPACITANCE VALUE N = NP0 X = X7R (in picofarads) 2 digit significant figure, followed by a multiplier 101 = 100 pF 392 = 3000 pF 104 = 0.1 µF 0 1 K T B TOLERANCE TERMINAL FINISH PACKAGING K = 10 % M = 20 % T = Sn90/Pb10 B = Bulk Historical Part Numbering: MCN0801101KS10 (will continue to be accepted) MCN HISTORICAL MODEL Document Number: 68004 Revision: 17-Mar-08 08 PIN COUNT 01 101 SCHEMATIC CAPACITANCE VALUE K S10 TOLERANCE TERMINAL FINISH For technical questions, contact: [email protected] www.vishay.com 15 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1