VSSX1284 www.vishay.com Vishay Dale Thin Film 25 mil Pitch, IEEE 1284 Termination Thin Film Surface Mount Resistor, Capacitor, Diode FEATURES • One sophisticated, technology solution integrated Thin Film • Up-graded IEEE 1284 parallel port termination, pull-up with the addition of diodes for filtering on the parallel port • Standard QSOP package (28 pins) - JEDEC MO-137AF Product is pictured larger than actual size to show detail • 17 terminating lines Vishay has upgraded the standard IEEE 1284 Thin Film technology Network, incorporating diodes for protecting the inputs/outputs from electro-static discharge (ESD). • Reduces total cost • Increase board utilization • Better performance over discretes The sophisticated circuit is housed in a standard QSOP, 28-pin package. • Compliant to RoHS Directive 2002/95/EC Uses include ECP/EPP parallel port terminations for PC peripherals, notebooks, desktops, workstations and servers. This is a guaranteed stock part. SCHEMATIC GND 28 R1 R1 27 R1 R1 26 25 R1 R1 R2 1 24 2 R1 R2 3 23 R1 R2 4 VCC 22 21 20 19 R1 R2 5 R1 R1 R2 6 18 R1 R2 7 8 17 R1 R1 R1 R2 9 10 16 R1 R2 11 15 12 R1 R2 13 14 STANDARD ELECTRICAL SPECIFICATIONS TEST Material SPECIFICATIONS CONDITIONS Polysilicon/thin film on silicon - Pin/Lead Number 28 - Resistance Range - - TCR: Absolute - - TCR: Tracking - - ± 10 % (R), ± 20 % (C) - Tolerance: Absolute Power Rating: Resistor 100 mW - Power Rating: Package 1W - - - Stability: Ratio Operating Temperature Range Storage Temperature Range Capacitance Range ESD Protection 0 °C to + 70 °C - - 65 °C to + 150 °C - - - See table - Breakdown Voltage - - Signal clamp voltage (+) clamp > 6 V; (-) clamp < - 6 V - 1 μA Maximum at 25 °C Maximum leakage current at VCC Revision: 09-Sep-11 Document Number: 60089 165 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VSSX1284 www.vishay.com Vishay Dale Thin Film ESD PROTECTION MAXIMUM MINIMUM + 8 kV - 4 kV + 15 kV - 8 kV Peak Discharge Voltage at any I/O, Human Body Model, Method 3015 (1) In System Protection HBM (2) In System Protection, IEC 1000-4-2, Level 2 (2)(3) + 8 kV - 4 kV Channel Clamp Voltage at 8 kV ESD Pulses, HBM (1)(2) + 30 V - 30 V Notes (1) Human body model per MIL-STD-883, method 3015 C Discharge = 100 pF, RDischarge = 1.5 k pin 20 at 5 V and pin 22 at ground. (2) Pin 22 grounded, pin 20 to V CC all other pins are open. ESD contact discharge between ground and pins 1, 2, 8, 10, 12, 15, 16, 17, 18, 19, 21, 23 through 28, one at a time. (3) Standard IEC 1000-4-2 with C Discharge = 150 pF, RDischarge = 330 pin 20 at 5 V and pin 22 at ground. DIMENSIONS in inches and millimeters 1 E DIMENSION INCHES A 0.068 1.727 A1 0.008 0.203 0.305 H D SEATING PLANE h x 45° A C a° e B L A1 MILLIMETERS B 0.012 C 0.010 0.254 D 0.394 10.008 E 0.157 3.988 e 0.025 0.635 H 0.244 6.198 h 0.016 0.406 L 0.038 0.889 a° 8 Note • Mold flash not included in body dimensions. JEDEC MO-137 package MECHANICAL SPECIFICATIONS R/C Element STANDARD VALUES Polysilicon/thin film Substrate Material Silicon Body Molded epoxy Terminals AVAILABLE MODELS R1 () R2 () C (pF) VSSX1284A 4.7K 33 180 VSSX1284B 2.2K 33 220 Copper alloy Plating 100 % matte Sn Lead Coplanarity 0.005" Marking Resistance to Solvents MIL-STD-202, method 15 Flammability UL 94 V-0 GLOBAL PART NUMBER INFORMATION Global Part Numbering: VSSX1284ATF V Revision: 09-Sep-11 S S X 1 2 8 4 A T GLOBAL MODEL PACKAGING VSSX1284A or VSSX1284B UF = TUBED F TAPE AND REEL TF = Full reels Document Number: 60089 166 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000