MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS TO−264, 5−LEAD CASE 340AA ISSUE A SCALE 1:2 2X A B E Y 2X A 2X Q1 2X R A3 Q 0.25 C M DATE 04 FEB 2013 A B S P S D 2X R1 NOTE 5 1 2 3 4 5 L1 L 4X e b2 b1 c A1 b 0.25 TOP VIEW BOTTOM VIEW SIDE VIEW 5X M A B C S NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. DIMENSION b APPLIES BETWEEN 2.50 AND 3.81 FROM THE LEAD TIP. 4. DIMENSION S APPLIES TO THE MOUNTING HOLE (∅P). DIMENSION Q APPLIES TO THE NOTCHES (2X R). 5. THERMAL PAD SIZE AND SHAPE MAY VARY WITHIN THE AREA DEFINED BY DIMENSIONS D AND E. MILLIMETERS DIM MIN MAX A 4.70 5.31 A1 2.50 3.10 A3 2.00 REF b 1.10 1.50 2.00 REF b1 3.00 REF b2 c 0.43 0.74 D 25.58 26.59 E 19.30 20.29 e 3.81 BSC L 19.79 21.39 L1 2.10 2.30 P 3.00 3.51 Q 5.80 6.20 Q1 8.80 9.20 R 4.00 REF R1 2.00 REF S 9.00 BSC Y 1.80 REF GENERIC MARKING DIAGRAM* STYLE 1: PIN 1. BASE 2. EMITTER 3. COLLECTOR 4. ANODE 5. CATHODE XXXXXX AYYWWG XXXXXX = Specific Device Code A = Assembly Location YY = Year WW = Work Week G = Pb−Free Package *This information is generic. Please refer to device data sheet for actual part marking. Pb−Free indicator, “G” or microdot “ G”, may or may not be present. DOCUMENT NUMBER: STATUS: 98AON19871D ON SEMICONDUCTOR STANDARD NEW STANDARD: © Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 TO−264, 5−LEAD http://onsemi.com 1 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 1 OFXXX 2 DOCUMENT NUMBER: 98AON19871D PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION. REQ. BY D. TRUHITTE. 03 FEB 2005 A REDRAWN TO JEDEC STANDARDS. REQ. BY D. TRUHITTE. 04 FEB 2013 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. © Semiconductor Components Industries, LLC, 2013 February, 2013 − Rev. A Case Outline Number: 340AA