For more information, please visit the product page | For information on related products, view Dc Power Jacks date 05/10/2016 page 1 of 4 SERIES: SWI10-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY FEATURES • • • • • • • • up to 10 W continuous power CoC Tier 2 compliant universal input voltage range ultra-compact case no load power consumption < 0.075 W integrated USB connector over current, over voltage, and short circuit protections CE and GS safety approvals MODEL SWI10-5-E-I38 Notes: output voltage output current output power ripple and noise1 (Vdc) max (A) max (W) max (mVp-p) 5 2 10 300 efficiency level VI 1. At full load, 25°C, nominal input, 20 MHz bandwidth oscilloscope, output parallel with 0.1 μF and 10 μF capacitors to ground. PART NUMBER KEY SWI10 - 5 - E - I38 - CXX Base Number Reserved for Custom Configurations Output Voltage AC Input Type: Europe cui.com USB Type A Inlet For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: SWI10-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 05/10/2016 │ page 2 of 4 INPUT parameter conditions/description min voltage typ 90 frequency 47 current at nominal input voltage leakage current at nominal input voltage & frequency no load power consumption at 115/230 Vac, 60/50 Hz max units 264 Vac 63 Hz 0.3 A 0.25 mA 0.075 W max units OUTPUT parameter conditions/description min load regulation typ ±5 start-up time hold-up time % 3 at nominal input voltage, full load 5 s ms PROTECTIONS parameter conditions/description min over voltage protection with zener clamp over current protection output shut down, auto recovery typ max units 10 Vdc 4 A max units short circuit protection SAFETY & COMPLIANCE parameter conditions/description min isolation voltage input to output at 10 mA for 1 minute safety approvals GS EMI/EMC CE MTBF as per Telcordia SR-332, Issue 2, at 115/230 Vac, full load, 0~40°C RoHS 2011/65/EU typ 3,000 4,242 Vac Vdc 50,000 hours ENVIRONMENTAL parameter conditions/description min operating temperature storage temperature max units 0 typ 40 °C -20 60 °C operating humidity non-condensing 20 85 % storage humidity non-condensing 5 95 % cui.com For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: SWI10-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 05/10/2016 │ page 3 of 4 MECHANICAL parameter conditions/description dimensions 69.6 x 38.5 x 23.5 inlet plug Europe min max 40 MECHANICAL DRAWING units: mm Output Voltage 1 +5V 2 Short 3 Short 4 GND +5 GND units mm weight PIN typ 1 4 cui.com g For more information, please visit the product page | For information on related products, view Dc Power Jacks CUI Inc │ SERIES: SWI10-E-USB │ DESCRIPTION: AC-DC POWER SUPPLY date 05/10/2016 │ page 4 of 4 REVISION HISTORY rev. 1.0 description date initial release 05/10/2016 The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CUI offers a one (1) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.