ILD217T www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package FEATURES A1 8C • Two channel coupler C2 7E • SOIC-8 surface mountable package A3 6C • Standard lead spacing of 0.05" C4 5E • Available only on tape and reel option (conforms to EIA standard 481-2) i179018-2 i179025 • Isolation test voltage, 4000 VRMS DESCRIPTION • Compatible with dual wave, vapor phase and IR reflow soldering The ILD217T are optically coupled pairs with a gallium arsenide infrared LED and a silicon NPN phototransistor. Signal information, including a DC level, can be transmitted by the device while maintaining a high degree of electrical isolation between input and output. The ILD217T come in a standard SOIC-8 small outline package for surface mounting which makes it ideally suited for high density applications with limited space. In addition to eliminating through-holes requirements, this package conforms to standards for surface mounted devices. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 AGENCY APPROVALS • UL1577, file no. E52744 system code Y • cUL - file no. E52744, equivalent to CSA bulletin 5A The high BVCEO of 70 V gives a higher safety margin compared to the industry standard of 30 V. ORDERING INFORMATION SIOC-8 I L D 2 1 7 T PART NUMBER 6.1 mm CTR (%) AGENCY CERTIFIED/PACKAGE 1 mA UL, cUL ≥ 100 SOIC-8 ILD217T ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Peak reverse voltage VR 6 V 1 A IF 30 mA Pdiss 50 mW Collector emitter breakdown voltage BVCEO 70 V Emitter collector breakdown voltage BVECO 7 V Pdiss 125 mW Peak pulsed current Continuous forward current per channel Power dissipation 1 μs, 300 pps OUTPUT Power dissipation per channel Document Number: 84268 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 23-Jul-14 ILD217T www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT t=1s VISO 4000 VRMS Ptot 350 mW COUPLER Isolation test voltage Total package dissipation ambient (2 LEDs and 2 detectors, 2 channels) Storage temperature Tstg -55 to +150 °C Operating temperature Tamb -55 to +100 °C Soldering time from 260 °C (1) Tsld 10 s Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 10 mA Reverse current VR = 6 V Capacitance VR = 0 V MIN. TYP. MAX. UNIT VF 1.2 1.55 V IR 0.1 100 μA CO 25 INPUT pF OUTPUT Collector emitter breakdown voltage IC = 10 μA BVCEO 70 V Emitter collector breakdown voltage IE = 10 μA BVECO 7 V VCE = 10 V, IF = 0 A ICEO 5 VCE = 0 V CCE 10 IF = 10 mA, IC = 2.5 mA VCEsat Collector emitter leakage current Collector emitter capacitance 50 nA pF COUPLER Collector emitter saturation voltage 0.4 V Capacitance (input to output) CIO 0.5 pF Resistance (input to output) RIO 100 GΩ Note • Minimum and maximum values were tested requirements. Typical values are characteristics of the device and are the result of engineering evaluations. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. IC/IF VCE = 5 V, IF = 1 mA CTR 100 120 SYMBOL MIN. MAX. UNIT % SAFETY AND INSULATION RATINGS PARAMETER Climatic classification Comparative tracking index TEST CONDITION according to IEC 68 part 1 TYP. MAX. UNIT 55/100/21 CTI 175 399 VIOTM 6000 V VIORM 560 V PSO 350 mW ISI 150 mA TSI 165 °C Creepage distance 4 mm Clearance distance 4 mm Insulation thickness 0.2 mm Note • As per IEC 60747-5-5, §7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. Document Number: 84268 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 23-Jul-14 ILD217T www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 6.10 ± 0.25 6.27 max. 5.84 ± 0.13 0.15 ± 0.05 0.41 typ. 1.27 nom. 6 Leads coplanarity 0.1 max. R0.13 5 0.36 7 0.51 ± 0.13 0.91 1.27 8 0.20 typ. 3.17 ± 0.13 3.91 ± 0.13 4.32 6.60 PIN one I.D. 1 2 3 1.14 4 ISO method PACKAGE MARKING (Example) D217 V YWW Y 68 Note • Tape and reel suffix (T) is not part of the package marking. Document Number: 84268 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.0, 23-Jul-14 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000