dm00111342

TN1173
Technical note
Packing information
for IPAD™, protection, rectifiers, thyristors and AC Switches
Introduction
This technical note provides details about packing for axial, through hole, surface mounting
and chip scale packages.
October 2015
DocID026117 Rev 3
1/23
www.st.com
23
Contents
TN1173
Contents
1
2
3
4
2/23
Tape and reel delivery mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1
Tape dimensions for surface mount packages . . . . . . . . . . . . . . . . . . . . . . 3
1.2
Reel dimensions for surface mount packages . . . . . . . . . . . . . . . . . . . . . . 8
1.3
Tape and reel dimensions for through hole packages . . . . . . . . . . . . . . . .11
1.4
Tape and reel dimensions for axial packages . . . . . . . . . . . . . . . . . . . . . 13
Tube delivery mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
2.1
Tube dimensions for surface mount packages . . . . . . . . . . . . . . . . . . . . . 14
2.2
Tube dimensions for through hole packages . . . . . . . . . . . . . . . . . . . . . . 16
Box delivery mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.1
Matchbox (bulk) dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
3.2
Ammopack (fan fold box) dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
DocID026117 Rev 3
TN1173
1
Tape and reel delivery mode
1.1
Tape dimensions for surface mount packages
Unless otherwise specified in product specification.
Table 1. Surface mount devices - all dimensions in millimeters
Drive hole
spacing
Component
spacing
Drive hole
diameter
Pocket hole
diameter
Distance
between hole
lines
Pocket
B0
A
D0
D1
F
D2PAK
4 ±0.1
2 ±0.05
1.55 ±0.05
0.4 ±0.05
DPAK
4 ±0.1
4 ±0.1
1.5 +0.1/-0
LFCSP 4x4
4 ±0.2
8 ±0.1
LFCSP 5x5
4 ±0.1
MELF
Hole
interval
K
W
P0
3.5 ±0.05
0.33 ±0.02
8 ±0.1
2 ±0.05
1.5 min
5.5 ±0.05
1.1 ±0.1
12 ±0.3
2 ±0.05
1.5 +0.1/-0
1.5 min
5.5 ±0.05
1.1 ±0.1
12 ±0.3
2 ±0.05
4 ±0.1
1.55 ±0.05
1.5 min
5.5 ±0.05
2.9 ±0.1
12 ±0.3
2 ±0.05
4 ±0.1
4 ±0.1
1.55 ±0.05
1 +0.25/-0
3.5 ±0.05
1.83 ±0.1
8 ±0.3
2 ±0.05
MiniMELF
4 ±0.1
8 ±0.1
1.5 +0.1/-0
1.5 min
5.5 ±0.05
1.2 ±0.1
12 ±0.3
2 ±0.05
Power SO-10
4 ±0.1
24 ±0.1
1.5 +0.1/-0
1.5 min
11.5 ±0.05
3.9 ±0.1
24 ±0.3
2 ±0.1
Power SO-20
4±
8 ±0.1
1.55 ±0.05
1.6 ±0.1
7.5 ±0.1
2.65 ±0.1
16 ±0.3
2 ±0.1
PowerFLAT 5x6
4 ±0.1
24 ±0.1
1.55 ±0.05
1.5 min
11.5 ±0.1
4.25 ±0.1
24 ±0.3
2 ±0.1
PPAK
4 ±0.1
8 ±0.2
1.5 ±0.1
1.5 min.
5.5 ±0.05
0.8 ±0.1
12 ±0.3
2 ±0.05
QFN 1.45x1-6L
4 ±0.2
4 ±0.2
1.5 ±0.1
-
3.5 ±0.3
0.75
8 +0.3/-0.1
2 ±0.5
QFN 1.5x1.7-8L
4 ±0.2
4 ±0.2
1.5 ±0.1
1 min
3.5 ±0.3
0.75
8 +0.3/-0.1
2 ±0.5
QFN 1.7x1.35-8L
4 ±0.1
8 ±0.1
1.5 +0.1/-0
1.5 min
5.5 ±0.05
1.1 ±0.1
12 ±0.3
2 ±0.05
QFN 1.8x2-6L
4 ±0.2
4 ±0.2
1.5 ±0.1
-
3.5 ±0.3
0.75
8 +0.3/-0.1
2 ±0.5
QFN 1x1-6L
4 ±0.1
8 ±0.1
1.55 ±0.05
1.6 ±0.1
7.5 ±0.01
2.65 ±0.1
16 ±0.3
2 ±0.1
QFN 2.5x1.5-12L
4 ±0.2
4 ±0.2
1.5 ±0.1
-
3.5 ±0.3
0.75
8 +0.3/-0.1
2 ±0.5
QFN 2x2-8L
4 ±0.1
4 ±0.1
1.5 ±0.05
1 ±0.25
3.5 ±0.05
1 ±0.05
8 ±0.3
2 ±0.05
Package
DocID026117 Rev 3
3/23
Tape and reel delivery mode
Tape width
depth
Drive hole
spacing
Component
spacing
Drive hole
diameter
Pocket hole
diameter
Distance
between hole
lines
Pocket
B0
A
D0
D1
F
QFN 3.3x1.5-16L
4 ±0.2
4 ±0.1
1.55 ±0.1
1.5 min
QFN 3.5x1.2-16L
4 ±0.2
4 ±0.2
1.5 ±0.1
QFN 3x3-12L
4 ±0.1
8 ±0.2
QFN 3x3-16L
4 ±0.1
QFN 3x3-6L
Hole
interval
K
W
P0
5.5 ±0.05
0.8 ±0.1
12 ±0.3
2 ±0.05
-
3.5 ±0.3
0.75
8 +0.3/-0.1
2 ±0.5
1.5 ±0.1
1.5 min.
5.5 ±0.05
1.1 ±0.1
12 ±0.3
2 ±0.05
8 ±0.1
1.5 ±0.05
1.5 min
5.5 ±0.05
1.1
12 ±0.3
2 ±0.05
4 ±0.1
8 ±0.2
1.5 ±0.1
1.5 min.
5.5 ±0.05
0.7 ±0.1
12 ±0.3
2 ±0.05
QFN 4x4-24L
4 ±0.2
8 ±0.2
1.5 ±0.1
1.5 min
5.5 ±0.05
1.1 ±0.1
12 ±0.3
2 ±0.05
QFN 4x5-16L
4 ±0.1
2 ±0.05
1.55 ±0.05
0.4 ±0.05
3.5 ±0.05
0.47 ±0.02
8 ±0.1
2 ±0.05
QFN 5x5-14L
4 ±0.1
8 ±0.2
1.5 ±0.1
1.5 min.
5.5 ±0.05
1.1 ±0.1
12 ±0.3
2 ±0.05
QFN 5x5-5L
4 ±0.2
8 ±0.2
1.5 ±0.1
1.5 min
5.5 ±0.05
1.1 ±0.1
12 ±0.3
2 ±0.05
QFN 6x6-36L
4 ±0.1
12 ±0.1
1.5 +0.1/-0
1.5 min
7.5 ±0.1
1.1 ±0.1
16 ±0.3
2 ±0.1
QSOP24
4 ±0.1
8 ±0.1
1.5 +0.1/-0
1.6 +1/-0.1
7.5 ±0.1
2.1 ±0.1
16 ±0.3
2 ±0.1
QSOP28
4 ±0.1
8 ±0.1
1.5 +0.1/-0
1.6 +1/-0.1
7.5 ±0.1
2.1 ±0.1
16 ±0.3
2 ±0.1
SMA
SMA Flat
4 ±0.1
4 ±0.1
1.5 ±0.1
1.5 min
5.5 ±0.5
2.29 ±0.1
12 ±0.3
2 ±0.05
SMB
4 ±0.1
8 ±0.1
1.5 ±0.5
1.5 min
5.5 ±0.5
2.74 ±0.1
12 ±0.3
2 ±0.05
SMB Flat
4 ±0.1
8 ±0.1
1.55 ±0.05
1.5 min
5.5 ±0.1
1.3 ±0.1
12 ±0.3
2 ±0.1
SMB Flat-3L
4 ±0.1
8 ±0.1
1.55 ±0.05
1.5 min
5.5 ±0.1
1.3 ±0.1
12 ±0.3
2 ±0.1
SMC
4 ±0.1
8 ±0.1
1.5 ±0.5
1.5 min
7.5 ±0.1
2.75 ±0.1
16 ±0.3
2 ±0.1
SO-20
4 ±0.1
12 ±0.1
1.5 +0.1/-0
1.5 min
11.5 ±0.05
6.5 max
24 ±0.3
2 ±0.1
SO-8
4 ±0.1
8 ±0.1
1.5 +0.1/-0
1.6 min
5.5 ±0.5
2.6 ±0.1
12 ±0.3
2 ±0.05
SO-8W
4 ±0.1
12 ±0.1
1.5 +0.1/-0
1.5 min
7.5 ±0.05
2.6 ±0.1
16 ±0.3
2 ±0.05
SOD123
4 ±0.1
4 ±0.1
1.55 ±0.05
1(+0.25/-0)
3.5 ±0.05
1.2 ±0.1
8 ±0.3
2 ±0.05
Package
DocID026117 Rev 3
TN1173
Tape width
depth
Tape and reel delivery mode
4/23
Table 1. Surface mount devices - all dimensions in millimeters (continued)
Drive hole
spacing
Component
spacing
Drive hole
diameter
Pocket hole
diameter
Distance
between hole
lines
Pocket
B0
A
D0
D1
F
SOD128
4 ±0.1
4 ±0.1
1.50 ±0.10
1.55 ±0.05
SOD323
4 ±0.1
4 ±0.1
1.55 ±0.05
SOD523
4 ±0.1
2 ±0.5
SOD723
4 ±0.1
SOD882
Hole
interval
K
W
P0
5.5 ±0.05
1.25 ±0.05
12 ±0.2
2 ±0.05
1(+0.25/-0)
3.5 ±0.05
1.2 ±0.1
8 ±0.3
2 ±0.05
1.5 ±0.1
0.5 ±0.05
3.5 ±0.05
0.73 ±0.05
8 ±0.2
2 ±0.05
2 ±0.5
1.5 ±0.1
0.5 ±0.05
3.5 ±0.05
0.62 ±0.05
8 ±0.2
2 ±0.05
4 ±0.1
2 ±0.5
1.55 ±0.05
0.4 ±0.05
3.5 ±0.1
0.66 ±0.05
8 +0.3/-0.1
2 ±0.05
SOD882T
4 ±0.1
4 ±0.1
1.5 +0.1/-0
0.5 ±0.05.
3.5 ±0.05
0.53 ±0.05
8 +0.3/-0.1
2 ±0.05
SOT223
4 ±0.1
8 ±0.1
1.55 ±0.05
1.5 ±2.25
5.5 ±0.05
1.88 ±0.1
12 ±0.3
2 ±0.05
SOT23-3L
4 ±0.1
4 ±0.1
1.5 +0.1/-0
1min
3.5 ±0.05
1.2 ±0.1
8 +0.3/-0.1
2 ±0.05
SOT23-5L
4 ±0.1
4 ±0.1
1.5 +0.1/-0
1 min
3.5 ±0.05
1.4 ±0.1
8 +0.3/-0.1
2 ±0.05
SOT23-6L
4 ±0.1
4 ±0.1
1.5 +0.1/-0
1 min
3.5 ±0.05
1.4 ±0.1
8 +0.3/-0.1
2 ±0.05
SOT323
4 ±0.2
4 ±0.2
1.5 +0.1/-0
1 min
3.5 ±0.05
1.2 ±0.1
8 ±0.3
2 ±0.05
SOT323-5L
4 ±0.2
4 ±0.2
1.5 +0.1/-0
1 min
3.5 ±0.05
1.2 ±0.1
8 ±0.3
2 ±0.05
SOT323-6L
4 ±0.2
4 ±0.2
1.5 +0.1/-0
1 min
3.5 ±0.05
1.2 ±0.1
8 ±0.3
2 ±0.05
SOT663
4 ±0.1
4 ±0.1
1.5 +0.1/-0
1 min
3.5 ±0.05
0.69 ±0.05
8 +0.3/-0.1
2 ±0.05
SOT665
4 ±0.1
4 ±0.1
1.5 +0.1/-0
1 min
3.5 ±0.05
0.69 ±0.05
8 +0.3/-0.1
2 ±0.05
SOT666
4 ±0.1
4 ±0.1
1.5 +0.1/-0
1 min
3.5 ±0.05
0.69 ±0.05
8-0.1/+0.3
2 ±0.05
SOT883
4 ±0.1
2 ±0.05
1.5 +0.1/-0
0.4 ±0.05
3.5 ±0.3
0.66 ±0.05
8 +0.3/-0.1
2 ±0.05
SSOP20
4 ±0.1
12 ±0.1
1.55 ±0.05
1.5 min
7.5 ±0.1
2.62 ±0.1
16 +0.3/-0.1
2 ±0.1
SSOP24
4 ±0.1
12 ±0.1
1.5 +0.1/-0
1.5 min
7.5 ±0.1
2.5 ±0.1
16 ±0.3
2 ±0.05
ST01005
4 ±0.1
2 ±0.05
1.5 +-0.1
-
3.5 +-0.05
0.36+-0.03
8 +0.03 -0.01
2+-0.05
ST0201
4 ±0.2
4 ±0.2
1.5 ±0.1
-
3.5 ±0.03
0.6 ±0.02
8 +0.3/-0.1
2 ±0.5
STmite
4 ±0.1
4 ±0.1
1.55 ±0.05
1.55 ±0.05
5.25 ±0.05
1.27 ±0.1
12 +0.3/-0.1
2 ±0.05
Package
DocID026117 Rev 3
5/23
Tape and reel delivery mode
Tape width
depth
TN1173
Table 1. Surface mount devices - all dimensions in millimeters (continued)
Drive hole
spacing
Component
spacing
Drive hole
diameter
Pocket hole
diameter
Distance
between hole
lines
Pocket
B0
A
D0
D1
F
STmite Flat
4 ±0.1
4 ±0.1
1.55 ±0.05
1.5 min
TSSOP14
4 ±0.1
12 ±0.1
1.5 +0.1/-0
TSSOP20
4 ±0.1
12 ±0.1
1.5 +0.1/-0
Package
Tape width
Hole
interval
K
W
P0
5.5 ±0.1
1.1 ±0.1
12 ±0.3
2 ±0.1
1.5 min
7.5 ±0.1
1.6 ±0.1
16 ±0.3
2 ±0.05
1.5 min
7.5 ±0.1
1.8 ±0.1
16 ±0.3
2 ±0.05
depth
Tape and reel delivery mode
6/23
Table 1. Surface mount devices - all dimensions in millimeters (continued)
DocID026117 Rev 3
TN1173
TN1173
Tape and reel delivery mode
Figure 1. Tape characteristics for surface mount packages
0,1,0(/)
0(/)
'3$.
'3$.
60$
60%
60&
62'
60$)ODW
60%)ODW
VTXDUH UHFWDQJXODU 627/ 60%)ODW/
62
62' 67PLWH
627
4)1
4)1
627/
62' 67PLWH)ODW 3RZHU62
627
4623
67
DQGOHDGV
76623
67
627
/)&63
627
XQOHVVRWKHUZLVHVSHFLILHG
627
LQWKHSURGXFWGDWDVKHHW
627
3RZHU)/$7[
$VWKHUHLVQRFDWKRGHEDQGRQWKHELGLUHFWLRQDOGHYLFHVWKHPDUNLQJORJRSURGXFWLRQFRGHWUDFHFRGH
RIVXFKGHYLFHVLQWDSHSDFNHWVPD\QRWDOZD\VEHV\VWHPDWLFDOO\LQWKHVDPHGLUHFWLRQ
DocID026117 Rev 3
7/23
23
Tape and reel delivery mode
1.2
TN1173
Reel dimensions for surface mount packages
Unless otherwise specified in product specification.
Table 2. Surface mount devices - all dimensions in millimeters
Package
Base
qty
Carrier
tape width
Reel dimensions
W
A
B
(max)
C
D (min)
E (max)
F (min)
D2PAK
1000
24 ±0.3
24.4 ±0.3
30.4
13 ±0.2
60 ±0.25
330
20.2
DPAK
2500
16 ±0.3
16.4 +2/-0
22.4
13 ±0.2
100 ±0.25
330
20.2
Chip Scale Package
5000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
59 ±0.25
180
20.2
LFCSP 5x5
5000
12 ±0.3
12.4 ±0.3
13.4
13 ±0.2
60 ±0.25
330
20.2
LFSCP 4x4
5000
12 ±0.3
12.4 ±0.3
13.4
13 ±0.2
60 ±0.25
330
20.2
Melf
1500
12 ±0.3
5 ±0.5
8.9
12.5 ±0.5
53 ±0.5
180 ±1
20.2
Minimelf
2500
8 ±0.3
8 ±0.5
11.9
12.5 ±0.5
53 ±0.5
180 ±1
20.2
PowerFLAT 5x6
5000
12 ±0.3
8.4 ±1.5
14.4
13 ±0.2
60 ±0.5
180
20.2
PowerSO-10
600
24 ±0.3
24.4 ±0.3
30.4
13 ±0.2
60 ±0.25
330
20.2
PowerSO-20
600
24 ±0.3
24.4 ±0.3
30.4
13 ±0.2
60 ±0.25
330
20.2
PPAK
2500
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
60 ±0.25
330
20.2
QFN 1.45x1-6L
3000
8 +0.3/-0.1
8.4 ±0.3
14.4
13 ±0.2
60 ±0.25
185
20.2
QFN 1.5x1.7-8L
3000
8 +0.3/-0.1
8.4 ±0.3
14.4
13 ±0.2
60 ±0.25
185
20.2
QFN 1.7x1.35-8L
3000
8 +0.3/-0.1
8.4 ±0.3
14.4
13 ±0.2
60 ±0.5
185
20.2
QFN 1.8x2-6L
3000
8 +0.3/-0.1
8.4 ±0.3
14.4
13 ±0.2
60 ±0.25
185
20.2
QFN 1x1-6L
3000
8 +0.3/-0.1
8.4 ±1.5
14.4
13 ±0.2
60 ±0.5
180
20.2
QFN 2.5x1.5-12L
3000
8 +0.3/-0.1
8.4 ±0.3
14.4
13 ±0.2
60 ±0.25
185
20.2
QFN 2x2-8L
3000
8 ±0.3
8.4 ±1.5
14.4
13 ±0.2
60 ±0.5
180
20.2
QFN 3.3x1.5-16L
3000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
100 ±0.25
330
20.2
QFN 3.5x1.2-16L
3000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
60 ±0.5
180
20.2
QFN 3x3-12L
3000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
60 ±0.5
330
20.2
QFN 3x3-16L
3000
12 ±0.3
12.4 ±1.5
18.4
13 ±0.2
60 ±0.5
330
20.2
QFN 3x3-6L
3000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
60 ±0.5
180
20.2
QFN 4x4-24L
4000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
100 ±0.25
330
20.2
QFN 4x5-16L
3000
12 ±0.3
8.4 ±1.5
14.4
13 ±0.2
60 ±0.5
180
20.2
QFN 5x5-14L
3000
12 +-0.3
8.4 + 1.5
14.4
13 ±0.2
60 ±0.5
180
20.2
QFN 5x5-5L
3000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
60 ±0.25
180
20.2
QFN 6x6-36L
3000
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
60 ±0.5
180
20.2
QSOP24
2500
16 ±0.3
16.4 ±0.3
19.1
13 ±0.2
100 ±0.25
330
20.2
8/23
DocID026117 Rev 3
TN1173
Tape and reel delivery mode
Table 2. Surface mount devices - all dimensions in millimeters (continued)
Package
Base
qty
Carrier
tape width
Reel dimensions
W
A
B
(max)
C
D (min)
E (max)
F (min)
QSOP28
2500
16 ±0.3
16.4 ±0.3
19.1
13 ±0.2
100 ±0.25
330
20.2
SMA Flat
5000
12 ±0.3
12.4-0/+2
18.4
13 ±0.2
50 ±0.25
330
20.2
SMB
2500
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
50 ±0.25
330
20.2
SMB Flat
5000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
100 ±0.25
330
20.2
SMB Flat-3L
5000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
100 ±0.25
330
20.2
SMC
2500
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
50 ±0.25
330
20.2
SO-20
1000
24 ±0.3
24.4 ±0.3
30.4
13 ±0.2
60 ±0.25
330
20.2
2500
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
50 ±0.25
330
20.2
2500
12 ±0.3
13 +0.5/-0.2
18.4
13 ±0.2
50 ±0.25
180
20.2
SO-8W
1500
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
20.2 ±0.25
330
20.2
SOD123
3000
8 ±0.3
8.4 +0.2/-0.1
14.4
13 ±0.2
60 ±0.25
185
20.2
SOD128
3000
12 ±0.2
12.4 +0.3/-0.5
18.4
13 +0.5/-0.2
60±0.5
180
20.2
8.4 +0.2/-0
14.4
13 +0.5/-0.2
100 ±2
330 ±2
20.5 ±0.2
8.4 +0.2/-0.1
10.9
13 ±0.2
60 ±0.25
185
20.2
SO-8
10000
SOD323
8 ±0.2
3000
SOD523
3000
8 ±0.3
8.4 +0.2/-0.1
14.4
13 ±0.2
60 ±0.25
185
20.2
SOD882
12000
8 ±0.1
8.4 +1.6/-0
14.4
13 ±0.2
60 ±0.25
180
20.2
SOD882T
12000
8 ±0.1
8.4 ±1.5
14.4
13 ±0.2
60 ±0.5
180
20.2
50 ±0.25
330
12 ±0.3
13 max
22.4
13 ±0.2
60 ±0.25
178
4000
SOT223
1000
20.2
SOT223
4000
12 ±0.3
13 max
22.4
13 ±0.2
50 ±0.25
330
20.2
SOT23
3000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
50 ±0.25
180
20.2
SOT23-5L
3000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
50 ±0.25
180
20.2
SOT23-6L
3000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
50 ±0.25
180
20.2
SOT323
3000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
60 ±0.25
180
20.2
SOT323-5L
3000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
60 ±0.25
180
20.2
SOT323-6L
3000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
60 ±0.25
180
20.2
SOT663
3000
8 ±0.3
8.4 ±0.3
10.9
13 ±0.2
60 ±0.25
180
20.2
SOT665
3000
8 ±0.3
8.4 ±0.3
10.9
13 ±0.2
60 ±0.25
180
20.2
SOT666
3000
8 ±0.3
8.4 ±0.3
10.9
13 ±0.2
60 ±0.25
185
20.2
SOT883
12000 8 +0.3/-0.1
8.4 +1.6/-0
11.4
13 ±0.2
60 ±0.25
180
20.2
SSOP20
2000
16 ±0.3
16 ±0.3
22.4
13 ±0.2
50 ±0.25
330
20.2
SSOP24
2000
16 ±0.3
20 ±0.3
22.4
13 ±0.2
20.2 ±0.25
330
20.2
DocID026117 Rev 3
9/23
23
Tape and reel delivery mode
TN1173
Table 2. Surface mount devices - all dimensions in millimeters (continued)
Package
Base
qty
Carrier
tape width
Reel dimensions
W
A
B
(max)
C
D (min)
E (max)
F (min)
ST01005
20000
8 ±0.3
8.4 ±0.3
14.4
13 ±0.2
59 ±0.25
180
20.2
ST0201
5000
10000
8 ±0.1
8.4 ±1.5
14.4
13 ±0.2
60 ±0.5
180
20.2
STmite
12000
12 ±0.3
12.4 +2/-0
18.4
13 ±0.2
100 ±0.25
330
20.2
STmite Flat
12000
12 ±0.3
12.4 ±0.3
18.4
13 ±0.2
100 ±0.25
330
20.2
TSSOP14
2500
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
20.2 ±0.25
330
20.2
TSSOP20
2500
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
20.2 ±0.25
330
20.2
TSSOP24
2500
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
20.2 ±0.25
330
20.2
TSSOP28
2500
16 ±0.3
16.4 ±0.3
22.4
13 ±0.2
20.2 ±0.25
330
20.2
Figure 2. Reel characteristics for surface mount packages and TO92
B
ØE
Top cover
thickness: 0.10 mm (max)
ØC
2±0.5
ØD
F
Embossed carrier
W
A
10/23
DocID026117 Rev 3
TN1173
1.3
Tape and reel delivery mode
Tape and reel dimensions for through hole packages
Table 3. Through hole devices - all dimensions in millimeters
Package
TO-92
Base qty
2000
Carrier tape
width
Reel dimensions (Please refer to Figure 2)
W
A
B (max)
C
D (min)
E (max)
-
42
57
30
77
359
Figure 3. Tape and reel configuration
5HHO
,QQHUOLQHU
WDSH
/DEHO
7DSH
8QZLQGLQJ
GLUHFWLRQ
5HHOLQJRSWLRQV
6WDQGDUG FRPSRQHQWIODWVLGHIDFLQJRXW
Figure 4. Standard tape and component flat side facing out
DocID026117 Rev 3
11/23
23
Tape and reel delivery mode
TN1173
Figure 5. Tape characteristics for through hole devices
7
$
7
7
¨+
+
+
+
$+
$+
$3
$3
+
G
/
:
O
)
:
:
)
)
:
'
W
3
3
,WHP
%RG\ZLGWK
%RG\WKLFNQHVV
/HDGFHQWHUWRIODWGLVWDQFH
/HDGFHQWHUWRIURQWGLVWDQFH
/HDGZLUHGLDPHWHU
)HHGKROHSLWFK
+ROHFHQWHUWRFRPSRQHQWFHQWHU
/HDGWROHDGGLVWDQFH
([WHUQDOOHDGVGLVWDQFH
&RPSRQHQWDOLJQHPHQW PD[GHYLDWLRQ
7DSHZLGWK
+ROGGRZQWDSHZLGWK
+ROHSRVLWLRQ
+ROGGRZQWDSHZLGWK
+HLJKWRIFRPSRQHQWIURPWDSHFHQWHU
/HDGZLUHFOLQFKKHLJKW
&RPSRQHQWKHLJKW
)HHGKROHGLDPHWHU
7RWDOWDSHWKLFNQHVV
/HQJKWRIFOLSSHGOHDG
/HDGZLUHWDSHGSRUWLRQ
&RPSRQHQWDOLJQPHQW PD[GHYLDWLRQ
/RQJLWXGHQHFN
9DOXH
6\PERO
7ROHUDQFH
$PD[
7PD[
7PD[
7PD[
GPD[
3“
3“
))
)
ǻ+“
:
:“
:
:PD[
+
+“
+PD[
'“
WPD[
/PD[
,PLQ
ǻ3“
+“
'LPHQVLRQVLQPP
&XPXODWLYHSLWFKHUURUPPSLWFKHV
*URXQGSDSHUWDSHPP“
12/23
DocID026117 Rev 3
TN1173
1.4
Tape and reel delivery mode
Tape and reel dimensions for axial packages
Table 4. Axial devices - all dimensions in millimeters
Package
Base
qty
Component
spacing
Tape spacing
Reel dimensions
A
B
C
D
E
F
G
DO-15
6000
5 ±0.5
52 +2/-1
66 ±2
31.5 +0.5/-0
86 ±0.5
72 +3/-0.5
356 ±2
DO-201
1900
10 ±0.5
53 ±2
65 ±2
31.5
85
78 min.
356 ±2
DO-201AD
1900
10 ±0.5
52 +2/-1
65 ±2
16.5 ±0.5
82 ±0.5
73 ±0.5
359 ±2
DO-35
5000
5 ±0.5
52 +2/-1
65 ±2
20 +0.5/-0
48 ±0.5
72 +3/-1
260 ±2
DO-41
5000
5 ±0.5
52 +2/-1
65 ±2
16.5 ±0.5
82 ±0.5
73 ±0.5
359 ±2
R6
1000
10 ±0.5
53 ±2
65 ±2
31.5
86
78 min.
356 ±2
Figure 6. Tape and reel characteristics for axial packages
$
'
(
%
&
*
)
Note:
All unidirectional components are oriented with a red tape on cathode and white tape on
anode. Bidirectional components have red tapes on both sides.
DocID026117 Rev 3
13/23
23
Tube delivery mode
TN1173
2
Tube delivery mode
2.1
Tube dimensions for surface mount packages
Table 5. Surface mount devices - all dimensions in millimeters
Tube dimensions
Package
Base qty
Length
A
B
C
D2PAK
50
532 ±1
33.9 ±0.2
33.9 ±0.2
11 ±0.2
DPAK
75
532 ±0.5
6 ±0.1
21.3 ±0.2
0.6 +0.1/-0
PowerSO-10
50
532 ±1
18 ±0.2
18 ±0.2
12 ±0.2
SO16
50
532 ±0.1
7.8 ±0.1
7.8 ±0.1
3.8 ±0.1
SO-20
40
532 ±1
18.8 ±0.1
18.8 ±0.1
6.3 ±0.1
SO-8
100
532 ±1
7.8 ±0.1
7.8 ±0.1
3.8 ±0.1
SO-8 Wide
80
532 ±1
15 ±0.5
15 ±0.5
4.7 ±0.2
SSOP20
66
508 ±1.27
10.6 ±0.1
10.6 ±0.1
4 ±0.13
SSOP24
59
508 ±1.27
10.6 ±0.1
10.6 ±0.1
4 ±0.13
TSSOP20
74
508±1.27
7.83 ±0.1
7.83 ±0.1
3.04 ±0.127
TSSOP24
62
508 ±1.27
7.83 ±0.1
7.83 ±0.1
3.04 ±0.127
TSSOP28
20
508 ±1.27
7.83 ±0.1
7.83 ±0.1
3.04 ±0.127
14/23
DocID026117 Rev 3
TN1173
Tube delivery mode
Figure 7. Tube characteristics for surface mount packages
DPAK
D²PAK (no notches)
D²PAK (with notches)
C
C
B
C
B
A
B
A
PowerSO-10
A
SO-8
A
SO-8 Wide
A
A
C
C
C
B
B
B
SO-20
A
SSOP
TSSOP
C
C
C
A
B
A
B
B
DocID026117 Rev 3
15/23
23
Tube delivery mode
2.2
TN1173
Tube dimensions for through hole packages
Table 6. Through hole devices - all dimensions in millimeters
Base
qty
Package
Tube dimensions
Length
A
B
C
DIP-8
50
532 ±0.5
15.2 ±0.25 11.2 ±0.25 0.5 +0.15/-0.1
DIP-16
25
532 ±1
DIP-20
20
532 ±0.5
DO247
30
532 ±0.5
10 ±0.15
37.5 ±0.2
0.9 ±0.1
DOP3
30
532 ±0.5
6.4 +0.2/-0
40.5 ±0.2
0.5 +0.1/-0
IPAK
75
532 ±0.5
6 ±0.1
21.3 ±0.2
0.6 ±0.1
I2PAK
50
532 ±0.5
9.5 ±0.2
32.4 ±0.2
0.75 ±0.1
ISOTOP
10
532 ±0.5
26.5 ±0.15
23 ±0.2
1.25 max.
Max220
50
532 ±1
9.5 ±0.1
32.4 ±0.2
0.75 ±0.1
Max247
30
532 ±0.5
10 ±0.15
37.5 ±0.2
0.9 ±0.1
PENTAWATT
50
532 ±0.5
17 ±0.2
32.1 ±0.2
1 ±0.1
P2PAK
50
532 ±0.5
9.5 ±0.2
21.4 ±0.2
0.75 ±0.1
SOD-93
30
532 ±0.5
6.4 +0.2/-0
40.5 ±0.2
0.5 +0.1/-0
SOT-82
50
532 ±0.5
3.7 ±0.1
33 ±0.2
0.65 ±0.1
SOT-93
30
532 ±0.5
6.4 +0.2/-0
40.5 ±0.2
0.5 +0.1/-0
TO202-3
50
532 ±0.5
6.5 ±0.5
38.5 ±1
0.75 ±0.1
50
532 ±0.5
5.5 ±0.2
31.4 ±0.2
0.75 ±0.1
TO-220AB Ins. F5 option
50
532 ±0.5
9.3 ±0.1
32.2 ±0.2
0.85 ±0.05
TO-220FPAB / TO-220FPAC FD5
50
532 ±0.5
9.35 ±0.2
31.3 ±0.2
0.75 ±0.2
TO-247
30
537.5 +0.5/-1.0
10 ±0.15
37.5 ±0.2
0.9 ±0.1
TOP3 / TOP3 Ins.
30
532 ±0.5
6.4 +0.2/-0
40.5 ±0.2
0.5 +0.1/-0
15.2 ±0.25
11.2 ±0.2
15.2 ±0.25 11.2 ±0.25
0.5 ±0.3
-
TO-220AB / TO-220AB Ins
TO-220AC / TO-220AC Ins
TO-220FPAB / TO-220FPAC
16/23
DocID026117 Rev 3
TN1173
Tube delivery mode
Figure 8. Tube characteristics for through hole packages (1/2)
DO247 / TO-247 / Max247
Max220
C
TOP-3 / TOP-3 Ins. / DOP3
C
C
B
B
B
A
A
A
IPAK
I²PAK (no notches)
I²PAK (with notches)
C
C
C
B
B
A
B
A
ISOTOP
A
DIP-8 / DIP-16 / DIP-20
C
B
B
A
A
DocID026117 Rev 3
17/23
23
Tube delivery mode
TN1173
Figure 9. Tube characteristics for through hole packages (2/2)
SOT-82
SOD93 / SOT93
PENTAWATT
C
C
C
B
B
B
A
A
A
TO202-3
TO-220 / TO-220FP
A
C
B
B
C
A
18/23
DocID026117 Rev 3
TN1173
Box delivery mode
3
Box delivery mode
3.1
Matchbox (bulk) dimensions
Table 7. Axial and through hole devices - all dimensions in millimeters
Box dimensions
Package
Base qty
A
B
C
DO-201AD
500
77
77
252
RD91
25
148
80
62
R6
100
80
62
148
TO202-3
250
148
80
62
TO-220AB / TO-220AB Ins.
250
148
80
62
TO-92
2500
252
77
77
TOP3 / TOP3 Ins.
120
62
80
140
DO35
500
148
80
62
Figure 10. Matchbox characteristics
C
A
B
Note:
TO-92 leads are not bent in matchbox packing
DocID026117 Rev 3
19/23
23
Box delivery mode
3.2
TN1173
Ammopack (fan fold box) dimensions
Table 8. Axial devices - all dimensions in millimeters
Base
qty
Package
Component
spacing
Tape spacing
Box dimensions
A
B
C
D
E
F
DO-15
1000
5 ±0.5
52 (+2/-1)
66 ±2
252
77
77
DO-201
600
10 ±0.5
53 ±2
65 ±2
252
77
77
DO-201AD
600
10 ±0.5
52 (+2/-1)
65 ±2
252
77
77
DO-41 plastic
2000
5 ±0.5
52 (+2/-1)
65 ±2
252
77
77
R6
100
5 ±0.5
53 ±2
65 ±2
252
77
77
Figure 11. Ammopack characteristics for axial packages
A
E
D
B
C
F
Note:
All unidirectional components are oriented with a red tape on cathode and white tape on
anode. Bidirectional components have red tapes on both sides.
Table 9. Through hole devices - all dimensions in millimeters
Box dimensions
Package
TO-92
Base qty
2000
E
F
D
180
37
326
Figure 12. TO-92 ammopack characteristics
E
D
F
20/23
DocID026117 Rev 3
TN1173
Box delivery mode
Figure 13. Tape and ammopack (for tape dimensions see Figure 5)
Unwinding direction
Component flat
side facing out
Marking visible
on this side
Barcode
label
DocID026117 Rev 3
21/23
23
Revision history
4
TN1173
Revision history
Table 10. Document revision history
Date
Revision
02-Apr-2015
1
Initial release.
11-Aug-2015
2
Updated Figure 5.
3
Updated title in cover page.
Updated Table 1, Figure 1, Table 2.
Minor text changes.
09-Oct-2015
22/23
Changes
DocID026117 Rev 3
TN1173
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2015 STMicroelectronics – All rights reserved
DocID026117 Rev 3
23/23
23