STTH3006 Turbo 2 ultrafast high voltage rectifier Main product characteristics IF(AV) 30 A VRRM 600 V Tj 175° C VF (typ) 1.10 V trr (max) 50 ns A A K K DO-247 STTH3006W TO-220AC STTH3006D Features and benefits ■ Ultrafast switching ■ Low reverse current A K ■ Low thermal resistance ■ Reduces switching & conduction losses ■ Package insulation voltage: DOP3I : 2500 VRMS DOP3I STTH3006PI Order Codes Description The STTH3006 uses ST Turbo 2 600 V technology and is especially suited for use in switching power supplies, and industrial applications, such as rectification and continuous mode PFC boost diode. Table 1. Absolute Ratings (limiting values) Symbol Part Number Marking STTH3006D STTH3006D STTH3006W STTH3006W STTH3006PI STTH3006PI Parameter Value Unit VRRM Repetitive peak reverse voltage 600 V IF(RMS) RMS forward voltage 50 A 30 A 160 A -65 to + 175 °C 175 °C TO-220AC / DO-247 Tc = 115° C δ = 0.5 DOP3I Tc = 85° C δ = 0.5 IF(AV) Average forward current IFSM Surge non repetitive forward current Tstg Storage temperature range Tj tp = 10 ms sinusoidal Maximum operating junction temperature August 2006 Rev 2 1/8 www.st.com 8 Characteristics 1 STTH3006 Characteristics Table 2. Thermal resistance Symbol Rth(j-c) s Table 3. Symbol Value (max). Parameter TO-220AC / DO-247 1.1 DOP3I 1.7 Unit Junction to case °C/W Static electrical characteristic Parameter Test conditions Tj = 25° C IR (1) Reverse leakage current VF (2) Forward voltage drop Tj = 150° C Tj = 25° C Tj = 150° C Min. Typ Max. Unit 25 VR = VRRM µA 80 800 1.85 IF = 30 A V 1.10 1.40 1. Pulse test: tp = 5 ms, δ < 2% 2. Pulse test: tp = 380 µs, δ < 2% To evaluate the conduction losses use the following equation: P = 1.07 x IF(AV) + 0.011 IF2(RMS) Table 4. Symbol 2/8 Dynamic characteristics Parameter Test conditions Min. Typ Max. Unit IF = 0.5 A Irr = 0.25 A IR =1 A trr Reverse recovery time Tj = 25° C IRM Reverse recovery current VR = 400 V I = 30 A Tj = 125° C F dIF/dt = -100 A/µs tfr Forward recovery time Tj = 25 °C dIF/dt = 100 A/µs IF = 30 A VFR = 1.1 x VFmax VFP Forward recovery voltage Tj = 25° C IF = 30 A dIF/dt = 100 A/µs VFR = 1.1 x VFmax IF = 1 A dIF/dt = -50 A/µs VR =30 V 50 ns 50 70 8 11 A 500 ns 2.5 V STTH3006 Characteristics Figure 1. Conduction losses versus average forward current Figure 2. Forward voltage drop versus forward current IFM(A) P(W) 200 55 50 180 δ = 0.5 45 δ = 0.2 δ = 0.1 40 35 Tj=150°C (maximum values) 160 140 δ=1 δ = 0.05 120 Tj=150°C (typical values) 30 100 25 80 20 15 Tj=25°C (maximum values) 60 T 40 10 5 δ=tp/T IF(AV)(A) 20 tp 0 VFM(V) 0 0 5 Figure 3. 10 15 20 25 30 35 Relative variation of thermal impedance junction to case versus pulse duration 0.0 0.2 0.4 Figure 4. Zth(j-c)/Rth(j-c) 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 2.2 2.4 2.6 2.8 3.0 Peak reverse recovery current versus dIF/dt (typical values) IRM(A) 30 1.0 VR=400V Tj=125°C 0.9 IF=2 x IF(AV) 25 0.8 IF=IF(AV) IF=0.5 x IF(AV) 0.7 20 IF=0.25 x IF(AV) 0.6 15 0.5 0.4 0.3 10 Single pulse 0.2 5 0.1 tp(s) dIF/dt(A/µs) 0 0.0 1.E-03 Figure 5. 1.E-02 1.E-01 0 1.E+00 Reverse recovery time versus dIF/dt (typical values) 50 Figure 6. trr(ns) 100 150 200 250 300 350 400 450 500 Reverse recovery charges versus dIF/dt (typical values) Qrr(µC) 200 3.0 VR=400V Tj=125°C VR=400V Tj=125°C 150 2.5 IF=2 x IF(AV) IF=IF(AV) IF=0.5 x IF(AV) IF=2 x IF(AV) 2.0 IF=IF(AV) 1.5 100 IF=0.5 x IF(AV) 1.0 50 0.5 dIF/dt(A/µs) dIF/dt(A/µs) 0.0 0 0 200 400 600 800 1000 0 200 400 600 800 1000 3/8 Characteristics Figure 7. STTH3006 Softness factor versus dIF/dt (typical values) Figure 8. S factor Relative variations of dynamic parameters versus junction temperature 2.50 0.6 IF≤2 x IF(AV) VR=400V Tj=125°C 0.5 IF=IF(AV) VR=400V Reference: Tj=125°C 2.25 2.00 S factor 1.75 0.4 1.50 1.25 0.3 1.00 0.75 0.2 IRM 0.50 0.1 25 0 50 Figure 9. 100 150 200 250 300 Tj(°C) 0.00 0.0 350 400 450 50 75 100 125 500 Transient peak forward voltage versus dIF/dt (typical values) Figure 10. Forward recovery time versus dIF/dt (typical values) tfr(ns) VFP(V) 800 8.0 7.5 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0.0 IF=IF(AV) Tj=125°C IF=IF(AV) VFR=1.1 x VF max. Tj=125°C 700 600 500 400 300 200 100 dIF/dt(A/µs) dIF/dt(A/µs) 0 0 100 200 300 400 500 Figure 11. Junction capacitance versus reverse voltage applied (typical values) C(pF) 1000 F=1MHz VOSC=30mVRMS Tj=25°C 100 VR(V) 10 1 4/8 QRR 0.25 dIF/dt(A/µs) 10 100 1000 0 100 200 300 400 500 STTH3006 2 Package information Package information ● Epoxy meets UL94, V0 ● Cooling method: by conduction (C) ● Recommended torque value: 0.55 Nm (TO-220AC) ● Maximum torque value: 0.70 Nm (TO-220AC) Table 5. DO247 dimensions Dimensions Ref. Millimeters Min. V Typ. Max. Inches Min. Typ. Max. A 4.85 5.15 0.191 0.203 D 2.20 2.60 0.086 0.102 E 0.40 0.80 0.015 0.031 F 1.00 1.40 0.039 0.055 Dia V F2 2.00 0.078 A H F3 2.00 G 2.40 0.078 10.90 0.094 0.429 L5 L L2 L4 F2 L3 L1 15.45 15.75 0.608 0.620 L 19.85 20.15 0.781 0.793 L1 3.70 4.30 0.145 0.169 L2 F3 D V2 L3 F G H M E 18.50 14.20 0.728 14.80 0.559 0.582 L4 34.60 1.362 L5 5.50 0.216 M 2.00 3.00 0.078 0.118 V 5° 5° V2 60° 60° Dia. 3.55 3.65 0.139 0.143 5/8 Package information Table 6. STTH3006 TO-220AC dimensions Dimensions Ref. A H2 ØI C L5 L7 L6 L2 F1 D L9 F M E G Max. Min. Max. A 4.40 4.60 0.173 0.181 C 1.23 1.32 0.048 0.051 D 2.40 2.72 0.094 0.107 E 0.49 0.70 0.019 0.027 F 0.61 0.88 0.024 0.034 F1 1.14 1.70 0.044 0.066 G 4.95 5.15 0.194 0.202 H2 10.00 10.40 0.393 0.409 16.40 typ. 0.645 typ. L4 13.00 14.00 0.511 0.551 L5 2.65 2.95 0.104 0.116 L6 15.25 15.75 0.600 0.620 L7 6.20 6.60 0.244 0.259 L9 3.50 3.93 0.137 0.154 M Diam. I 6/8 Inches Min. L2 L4 Millimeters 2.6 typ. 3.75 3.85 0.102 typ. 0.147 0.151 STTH3006 Ordering information Table 7. DOP3I dimensions Dimensions Ref. E A Max. Min. Max. A 4.40 4.60 0.173 0.181 b 1.20 1.40 0.047 0.055 c 1.45 1.55 0.057 0.061 c1 0.50 0.70 0.020 0.028 D 12.15 13.10 0.474 0.516 E 15.10 15.50 0.594 0.610 E1 7.55 7.75 0.297 0.305 e 10.80 11.30 0.425 0.445 G 20.4 21.10 0.815 0.831 L 14.35 15.60 0.565 0.614 P 4.08 4.17 0.161 0.164 Q 2.70 2.90 0.106 0.114 c ØP G Y D L c1 b Q e R Y 3 4 Inches Min. E1 R Millimeters 4.60 typ. 15.80 0.181 typ. 16.50 0.622 0.650 Ordering information Ordering type Marking Package Weight Base qty Delivery mode STTH3006D STTH3006D TO-220AC 1.90 g 50 Tube STTH3006W STTH3006W DO-247 4.40 g 30 Tube STTH3006PI STTH3006PI DOP3I 4.46 g 30 Tube Revision history Date Revision Changes 22-May-2006 1 Initial release. 10-Aug-2006 2 Added Package insulation voltage on page 1 for DOP3I. 7/8 STTH3006 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8