ProSLIC Solutions Guide

VOICE SOLUTIONS
ProSLIC® Voice Solutions
www.silabs.com/proslic
FEATURES
•Performs all BORSCHT functions (battery,
test overvoltage, ringing, supervision,
coding, hybrid )
•Software programmable parameters for
global compliance with one hardware
solution
– 2 wire ac impedance and transhybrid
balance
– Ringing amplitude, frequency, cadence
and waveform
– DC linefeed characteristics
– Ring trip/loop closure thresholds and
filtering
– In-field programmable
•Configurable integrated dc-dc controllers
•Comprehensive remote diagnostics
•Powered using a single 3.3 V supply
•PCM/SPI, ISI and analog interface options
DESCRIPTION
•Available integrated DAA system side
for FXO
The ProSLIC® family of products provides complete analog telephone interfaces ideal for customer
BENEFITS
premise equipment (CPE) and enterprise applications. These highly-integrated circuits offer global
•Global compliance with single hardware
design
compliance using a single hardware design and bill-of-materials while reducing the PCB size and cost
per channel. Fully programmable parameters such as two-wire ac impedance, ring amplitude, ring
waveshape and dc linefeed characteristics are provided via a programmable DSP based architecture
that provides the flexibility and performance necessary to address the most demanding customers
and service providers. These combined SLIC and codec solutions integrate a comprehensive set of
•Easily configured to support a wide range
of customer requirements
•Smallest PCB area and lowest cost per
channel
telephony features including DTMF generation/decoding, FSK caller ID generation, GR-909 loop
diagnostics, pulse metering and battery switching control. Select models include an integrated dc-dc
controller that continuously adapts to the line voltage to minimize thermal dissipation and maximize
power efficiency. All devices are powered using a single 3.3 V supply.
APPLICATIONS
•VoIP gateways and routers
•xDSL IADs
•Optical Network Terminals/Units (ONT/U)
FSYN C
DRX
DTX
PCM/GCI
Interface
Codec
SLIC
Linefeed
Interface
RING
Tone
Generators
DTMF
Decode
RESET
PCLK
•Wireless Local Loop (WLL)
•WiMAX CPE
SPI
Control
Interface
PLL
DC-DC
Controller
Linefeed
Monitor
Optional FXO
Isolation
Interface
Control
•Private Branch Exchange (PBX)
Hybrid
AC/DC
Termination
Ring
Detect
Off-Hook
RX
DCT
VREG
I GND
CID
QB
QE
TIP
BOM
SCLK
SDO
SDI
INT
•Cable eMTA
•Wireless Fixed Terminals (WFT)
CS
Isolation
Interference
ProSLIC BLOCK DIAGRAM
• Analog Terminal Adapters (ATA)
TIP
RING
•VoIP MDU gateways
HIGHLY INTEGRATED SINGLE AND DUAL
SUBSCRIBER LINE INTERFACE CIRCUIT
SOLUTIONS
MORE INFORMATION AND DOCUMENTATION DOWNLOADS AT: www.silabs.com/proslic
Engineering for a mixed-signal world.
VOICE SOLUTIONS
ProSLIC® Voice Solutions
www.silabs.com/proslic
Globally Compliant
Development Tools
The ProSLIC can be easily configured to country-specific requirements such as
ac impedance, ring frequency, ring cadence and ring waveform using a single
Single Channel Applications
Si32176 ProSLIC
(with battery supply)
hardware design and bill-of-materials.
•EMTAs, ONTs, IADs, ATAs, WFTs, etc.
•High voltage (-110 to -140 V) battery options
•Patented low power ringing
•Lowest power consumption
•Smallest board area
•GR-909 MLT and self test diagnostics
•Optional FXO using Si32178 (integrated DAA
system side) and Si32919 (DAA line side device)
•Short and medium loops
•1 FXS channel with optional FXO channel
Flexible
The device’s highly programmable feature set provides the flexibility to optimize
performance across the broadest range of customer applications. All SLIC and
codec parameters are 100% configurable using software programmable registers.
Silicon Labs’ API accelerates and simplifies code development with a ready-made
set of functions common to the ProSLIC family.
Si3226x Dual ProSLIC
(with battery supply)
Cost Effective
Dual Channel Applications
The ProSLIC’s complete integration of an analog telephony interface into a single
low-voltage CMOS device enables designers to realize an extremely compact
solution at an attractive price point. Availability of single, and dual channel
devices offers the right balance between size and cost per channel.
Integrated Battery Supply
Select devices incorporate an on-chip tracking dc-dc controller that eliminates the
need for bulky, expensive high-voltage power supplies. The generated supply
continuously adapts to the line conditions to minimize thermal dissipation and
maximize power efficiency.
•Cable EMTAs, DSL IADs, FTTH, FTTB, PBX
•High voltage (-110 to -140 V) battery options
•Patented low power ringing
•Lowest power consumption
•Smallest board area
•Tracking or shared battery support
•GR-909 MLT and self test diagnostics
•Short and medium loops
•2 or more FXS channels
Digital PCM Interface ProSLICs
PART NUMBER
# OF FXS
CHANNELS
# OF FXO
CHANNELS
MAX V
BATTERY
DAISY-CHAIN
MODE
Si32170-C
1
-140 V
PACKAGE
•
•
LGA42; 5x7 mm
Si32171-C
1
-110 V
Si32174-C
1
-110 V
•
•
•
LGA42; 5x7 mm
•
•
LGA42; 5x7 mm
Si32176-C
1
-110 V
Si32177-C
1
-140 V
•
•
•
LGA42; 5x7 mm
•
•
•
Si32178-B
1
1
-110 V
•
LGA42; 5x7 mm
•
•
•
Si32179-B
1
1
-136 V
LGA42; 5x7 mm
•
•
•
•
LGA42; 5x7 mm
Si32260-C
2
-110 V
•
•
•
•
Si32261-C
2
-140 V
•
•
•
•
MAX V
BATTERY
WIDEBAND
DTMF
DETECTION
PULSE
METERING
TRACKING
DC-DC
WIDEBAND
DTMF
DETECTION
PULSE
METERING
TRACKING
DC-DC
•
•
•
•
•
SHARED DC-DC
LGA47; 6x8 mm
•
•
•
•
SHARED
DC-DC
DAISY-CHAIN
MODE
LGA60; 8x8 mm
LGA47; 6x8 mm
LGA60; 8x8 mm
Digital Integrated Serial Interface (ISI) ProSLICs
PART NUMBER
# OF FXS
CHANNELS
# OF FXO
CHANNELS
Si32172-C
1
-110 V
•
Si32173-C
1
-140 V
•
Si32175-C
1
-110 V
Si32266-C
2
-110 V
Si32267-C
2
-140 V
Si32268-C
2
Si32269-C
2
PACKAGE
•
LGA42; 5x7 mm
•
LGA42; 5x7 mm
•
•
•
LGA42; 5x7 mm
•
•
•
•
LGA50; 6x8 mm
•
•
•
•
-110 V
•
•
•
•
LGA50; 6x8 mm
-140 V
•
•
•
•
LGA50; 6x8 mm
MAX V
BATTERY
WIDEBAND
AUDIO
DTMF
DETECTION
PULSE
METERING
LGA50; 6x8 mm
Analog Interface ProSLICs
PART NUMBER
# OF FXS
CHANNELS
# OF FXO
CHANNELS
Si32391-B
1
-136 V
•
•
QFN48; 6x6mm, 7x7 mm
Si32392-B
2
-136 V
•
•
QFN48; 6x6mm, 7x7 mm
© 2014, Silicon Laboratories Inc. ProSLIC, Silicon Laboratories and the Silicon Labs logo are trademarks or registered trademarks
of Silicon Laboratories Inc. All other product or service names are the property of their respective owners. For the most up to date
information please see your sales representative or visit our website at www.silabs.com. WEB March 2014, Rev E SOL-PRO
SI L I C O N L A BS | 4 0 0 W. C E S A R C H AV E Z | AU STIN , TX 78701 | 877-444-3032
TRACKING
DC-DC
SHARED
DC-DC
DAISY-CHAIN
MODE
PACKAGE
XX%
| SILAB S.CO M
Engineering for a mixed-signal world.