AP4310A

A Product Line of
Diodes Incorporated
AP4310A
DUAL OP AMP AND VOLTAGE REFERENCE
Description
Pin Assignments
The AP4310A is a monolithic IC specifically designed to regulate the
output current and voltage levels of switching battery chargers and
power supplies
(Top View)
The device contains two Op Amps and a 2.5V precision shunt voltage
reference. Op Amp 1 is designed for voltage control with its noninverting input internally connected to the output of the shunt
regulator. Op Amp 2 is for current control with both inputs
uncommitted. The IC offers the power converter designer a control
solution that features increased precision with a corresponding
reduction in system complexity and cost.
OUTPUT 1
1
8
VCC
INPUT 1-
2
7
OUTPUT 2
INPUT 1+/VKA
3
6
INPUT 2-
GND
4
5
INPUT 2+
The AP4310A is available in SO-8 package.
Features
SO-8
OP Amp





Input Offset Voltage: 0.5mV
Supply Current: 75A per OP Amp at 5.0V Supply Voltage
Unity Gain Bandwidth:1MHz
Output Voltage Swing: 0 to VCC-1.5V
Power Supply Range: 3 to 36V
Applications


Battery Charger
Switching Power Supply
Voltage Reference




Fixed Output Voltage Reference: 2.5V
Reference Voltage Tolerance :±0.4%
Sink Current Capability: 0.05 to 80mA
Typical Output Impedance: 0.2Ω


Totally Lead-free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
Typical Applications Circuit
R1
Opto
Isolator
R6
-
AC
Line
Battery
Pack
Op Amp 2
SMPS
+
R3
R4
Current
R2
Sense
R7
R5
Op Amp 1
VREF
+
R8
AP4310A
Application of AP4310A in a Constant Current and Constant Voltage Charger
AP4310A
Document number: DS36510 Rev. 2 - 2
1 of 8
www.diodes.com
September 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
AP4310A
Functional Block Diagram
OUTPUT 1
1
INPUT 1-
2
INPUT 1+/VKA
3
-
VCC
8
Op
Amp 1
+
7
OUTPUT 2
6
INPUT 2-
5
INPUT 2+
-
+
Op
Amp 2
GND
4
VREF
Absolute Maximum Ratings (Note 4)
Parameter
Symbol
VCC
Power Supply Voltage (VCC to GND)
Unit
40
V
-0.3 to VCC+0.3
V
Op Amp 2 Input Differential Voltage (Pins 5, 6)
40
V
IK
Voltage Reference Cathode Current (Pin 3)
100
mA
PD
Power Dissipation (TA = +25°C)
500
mW
TJ
Operating Junction Temperature
VIN
VID
Op Amp1 and 2 Input Voltage Range (Pins 2, 5, 6)
Rating
+150
C
-65 to +150
C
Lead Temperature (Soldering 10sec)
+260
C
ESD (Human Body Model)
≥2000
V
TSTG
Storage Temperature Range
TLEAD
ESD
Note 4: Stresses greater than those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “Recommended Operating Conditions” is not implied.
Exposure to “Absolute Maximum Ratings” for extended periods may affect device reliability.
Recommended Operating Conditions
Parameter
Supply Voltage
Ambient Temperature
AP4310A
Document number: DS36510 Rev. 2 - 2
Min
Max
Unit
3
36
V
-40
+105
C
2 of 8
www.diodes.com
September 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
AP4310A
Electrical Characteristics
(@VCC=5V, TA=+25C, unless otherwise specified.)
Parameters
Total Supply Current, excluding Current in
Voltage Reference
Conditions
Min
Typ
Max
VCC=5V, no load, -40°C ≤ TA ≤ +105°C
–
0.15
0.25
VCC=30V, no load, -40°C ≤ TA ≤ +105°C
–
0.20
0.30
TA = +25°C
2.49
2.50
2.51
-40°C ≤ TA ≤ +105°C
2.48
2.50
2.52
Unit
mA
Voltage Reference Section
Reference Voltage
IK=10mA
V
Reference Voltage Deviation over Full
Temperature Range
IK=10mA, TA= -40°C to +105°C
–
5
24
mV
Minimum Cathode Current for Regulation
–
–
0.01
0.05
mA
Dynamic Impedance
IK=1mA to 80mA, f<1kHz
–
0.2
0.5
Ω
TA = +25°C
–
0.5
3
TA = -40°C to +105°C
–
–
5
Input Offset Voltage Temperature Drift
TA = -40°C to +105°C
–
7
–
μV/°C
Input Bias Current (Inverting Input Only)
TA = +25°C
–
20
150
nA
Large Signal Voltage Gain
VCC = 15V, RL = 2kΩVO = 1.4V to 11.4V
85
100
–
dB
Power Supply Rejection Ratio
VCC = 5V to 30V
70
90
–
dB
VCC = 15V, VID = 1VVO = 2V
20
40
–
VCC = 15V, VID = -1VVO = 2V
5
20
–
Output Voltage Swing (High)
VCC = 30V, RL = 10kΩVID = 1V
27
28
–
V
Output Voltage Swing (Low)
VCC = 30V, RL = 10kΩVID = -1V
–
17
100
mV
Slew Rate
VCC = 18V, RL = 2kΩAV = 1,
VIN = 0.5V to 2V, CL = 100pF
0.2
0.5
–
V/μs
Unity Gain Bandwidth
VCC = 30V, RL = 2kΩCL = 100pF
0.7
1.0
–
MHz
TA = +25°C
–
0.5
3
TA = -40°C to +105°C
–
–
5
Input Offset Voltage Temperature Drift
TA = -40°C to +105°C
–
7
–
μV/°C
Input Offset Current
TA = +25°C
–
2
30
nA
Input Bias Current
TA = +25°C
–
20
150
nA
Input Voltage Range
VCC = 0 to 36V
0
–
VCC-1.5
V
Common Mode Rejection Ratio
TA = +25°C, VCM = 0 to 3.5V
70
85
–
dB
Large Signal Voltage Gain
VCC = 15V, RL = 2kΩVO = 1.4V to 11.4V
85
100
–
dB
Power Supply Rejection Ratio
VCC = 5V to 30V
70
90
–
dB
Source
VCC = 15V, VID = 1VVO = 2V
20
40
–
Sink
VCC = 15V, VID = -1VVO = 2V
5
20
–
Output Voltage Swing (High)
VCC = 30V, RL = 10kΩVID = 1V
27
28
–
V
Output Voltage Swing (Low)
VCC = 30V, RL = 10kΩVID = -1V
–
17
100
mV
Slew Rate
VCC = 18V, RL = 2kΩAV = 1,
VIN = 0.5V to 2V, CL = 100pF
0.2
0.5
–
V/μs
Unity Gain Bandwidth
VCC = 30V, RL = 2kΩCL = 100pF
0.7
1.0
–
MHz
Op Amp 1 Section (VCC = 5V, VO = 1.4V, TA = +25°C, unless otherwise noted.)
Input Offset Voltage
Source
Output Current
Sink
mV
mA
Op Amp 2 Section (VCC = 5V, VO = 1.4V, TA = +25°C, unless otherwise noted.)
Input Offset Voltage
Output Current
AP4310A
Document number: DS36510 Rev. 2 - 2
3 of 8
www.diodes.com
mV
mA
September 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
AP4310A
Performance Characteristics
Reference Voltage vs. Ambient Temperature
Cathode Current vs. Cathode Voltage
2.510
150
Cathode Current (mA)
Reference Voltage (V)
2.505
2.500
2.495
2.490
0
TA=25 C
50
0
-50
2.485
2.480
-40
VKA=VREF
100
-20
0
20
40
60
80
100
-100
-2
120
-1
0
o
Ambient Temperature ( C)
Input Bias Current vs. Ambient Temperature
2
3
Op Amp Voltage Gain
30
110
25
100
20
Voltage Gain(dB)
Input Bias Current (nA)
1
Cathode Voltage (V)
15
10
80
RL=2K
RL=20K
70
5
0
-40
90
60
-20
0
20
40
60
80
100
120
0
o
AP4310A
Document number: DS36510 Rev. 2 - 2
2
4
6
8
10
12
14
16
18
20
Supply Voltage (V)
Ambient Temperature ( C)
4 of 8
www.diodes.com
September 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
AP4310A
Ordering Information
AP4310A X XX - XX
Product Name
Package
Packing
RoHS/Green
M : SO-8
TR : Tape & Reel
Blank: Tube
G1 : Green
Package
Temperature
Range
Reference
Voltage
Voltage
Tolerance
SO-8
-40 to +105°C
2.5V
±0.4%
Part Number
Marking ID
Packing
AP4310AM-G1
AP4310AM-G1
100/Tube
AP4310AMTR-G1
AP4310AM-G1
4000/Tape & Reel
Marking Information
(Top View)
AP4310
AM-G1
YWWAXX
-
AP4310A
Document number: DS36510 Rev. 2 - 2
First and Second Lines: Logo and Marking ID
Third Line: Date Code
Y: Year
WW: Work Week of Molding
A: Assembly House Code
th
th
XX: 7 and 8 Digits of Batch No.
5 of 8
www.diodes.com
September 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
AP4310A
Package Outline Dimensions (All dimensions in mm (inch).)
(1)
Package Type: SO-8
4.700(0.185)
5.100(0. 201)
7°
~ 9°
0.320(0. 013)
TYP
1.350(0. 053)
1.750(0. 069)
8°
8°
~ 9°
7°
0.600(0. 024)
0.725(0. 029)
D
5.800(0. 228)
6.200(0. 244)
1.270(0. 050)
TYP
D
20:1
0.300(0. 012)
R0.150(0.006)
0.100(0. 004)
1.000(0. 039)
TYP
3.800(0. 150)
Option 1
4.000(0. 157)
0.300(0. 012)
0.150(0. 006)
0.250(0. 010)
Option 1
0°
8°
1°
7°
0.510(0. 020)
R0.150(0.006)
0.450(0. 017)
0.820(0. 032)
Option 2
0.350(0. 014)
TYP
Note: Eject hole , oriented hole and mold mark is optional .
AP4310A
Document number: DS36510 Rev. 2 - 2
6 of 8
www.diodes.com
September 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
AP4310A
Suggested Pad Layout
(1)
Package Type: SO-8
Grid
placement
courtyard
G
Z
Y
E
X
Dimensions
Z
(mm)/(inch)
G
(mm)/(inch)
X
(mm)/(inch)
Y
(mm)/(inch)
E
(mm)/(inch)
Value
6.900/0.272
3.900/0.154
0.650/0.026
1.500/0.059
1.270/0.050
AP4310A
Document number: DS36510 Rev. 2 - 2
7 of 8
www.diodes.com
September 2014
© Diodes Incorporated
A Product Line of
Diodes Incorporated
AP4310A
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2014, Diodes Incorporated
www.diodes.com
AP4310A
Document number: DS36510 Rev. 2 - 2
8 of 8
www.diodes.com
September 2014
© Diodes Incorporated