BT09VG 5-4000 MHz Wideband Medium Power Amplifier Device Features OIP3 = 41.0 dBm @ 1900 MHz Gain = 15.5 dB @ 1900 MHz Output P1 dB = 25.5 dBm @ 1900 MHz 50 Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Product Description Typical Performance1 BeRex’s BT09VG is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 . Requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Parameter Applications Vcc Bypass RF Choke RF In RF Out BT09VG DC Block DC Block Unit 900 1900 2450 3500 MHz Gain 21.5 15.5 13.5 10.8 dB S11 -16.0 -30.0 -14.0 -15.0 dB -24.0 -19.0 -19.0 -14.0 dB 39.0 24.5 3.7 41.0 25.5 4.0 41.0 27.0 4.7 42.0 25.0 5.4 dBm dBm dB S22 2 OIP3 P1dB Noise Figure 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 13 dBm per tone separated by 1 MHz. Min. Bandwidth IC @ (Vc = 5V) VC RTH Base station Infrastructure/RFID Commercial/Industrial/Military wireless system Application Circuits Frequency Typical 5 140 160 5.0 50 Max. Unit 4000 180 MHz mA V °C/W Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 Unit °C °C °C +7.0 220 23 V mA dBm *Operation of this device above any of these parameters may result in permanent damage. *external matching circuit: refer to the page 5 to 14. BeRex ●website: www.berex.com ● email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=160mA, T=25°C) BeRex ●website: www.berex.com ● email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier S-Parameter (Vdevice = 5.0V, Icc = 160mA, T = 25 °C, calibrated to device leads) BeRex Freq [MHz] S11 S11 S21 S21 S12 S12 S22 S22 Mag Ang Mag Ang Mag Ang Mag Ang 100 500 1000 1500 2000 2500 3000 3500 4000 0.65 0.74 0.79 0.81 0.83 0.85 0.88 0.92 0.96 -180.00 180.00 170.00 150.00 140.00 130.00 120.00 110.00 98.00 16.00 11.00 7.00 5.00 3.90 3.20 2.80 2.50 2.20 170.00 130.00 98.00 82.00 69.00 57.00 46.00 35.00 23.00 0.03 0.03 0.03 0.03 0.04 0.04 0.04 0.04 0.05 2.50 8.90 14.00 18.00 19.00 19.00 18.00 14.00 11.00 0.30 0.38 0.42 0.44 0.46 0.45 0.45 0.48 0.51 -170.00 -170.00 180.00 170.00 170.00 160.00 150.00 140.00 140.00 ●website: www.berex.com ● email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier WCDMA 6FA 2140 –55dBc WCDMA 6FA 2140 –60dBc BeRex ●website: www.berex.com ● email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier ACLR Application Circuit: 900 MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 C7 C5 RFout BT09VG C6 Tolerance C1 C2 C3* C4 C5 C6 100pF 1000pF 10uF 100pF 100pF 7pF ±5% ±5% ±20% ±5% ±5% ±5% C7 10pF ±5% L1 L2 39nH 6.8nH 5% 5% L2 Note: 10uF 1. PCB: 31mil thick FR4. 1000 pF 2. Distance between the center of the shunt cap(C6) and the input pin of BT09VG _ 7.0mm. 100pF 100 pF BT09VG BT013 39nH BB 100pF 100pF B 7pF 10pF 6.8nH 3. Distance between the center of the series cap(C7) and the output pin of BT09VG _ 3.5mm. 4. Distance between the center of the shunt inductor(L2) and the output pin of BT09VG _ 5.5mm. *Skipping C3 reduces device ruggedness. BeRex ●website: www.berex.com ● email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Performance Variation with Supply Voltage BeRex ●website: www.berex.com ● email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 1900MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 L2 C8 C5 RFout BT09VG C6 C7 C1 C2 C3* C4 C5 C6 C7 C8 L1 L2 Tolerance 100pF 100pF 10uF 100pF 100pF 2.7pF 1.5pF 4.7pF 39nH 1nH ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% 5% 2% Note:1. PCB: 31mil thick FR4. 10uF 1000 pF 100pF 100 pF 4.7pF BT09VG BT013 100pF 100pF B 2.7pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT09VG _ 4.0mm. 39nH BB 1nH 2. Distance between the center of the series cap(C8) and the input pin of BT09VG _ 2.5mm. 1.5pF 4. Distance between the center of the series inductor (L2) and the output pin of BT09VG _ 3.5mm. 5. Distance between the center of the shunt cap(C7) and the output pin of BT09VG _ 8.0mm. *Skipping C3 reduces device ruggedness. Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier BeRex ●website: www.berex.com ● email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Performance Variation with Supply Voltage BeRex ●website: www.berex.com ● email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 2450MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 C8 C5 RFout BT09VG C6 Tolerance C1 C2 C3* C4 C5 C6 100pF 1000pF 10uF 56pF 56pF 1.5pF ±5% ±5% ±20% ±5% ±5% ±5% C7 0.75pF ±5% C8 L1 2.2pF 33nH ±5% 5% C7 Note: 10uF 1. PCB: 31mil thick FR4. 1000 pF 2. Distance between the center of the series cap(C8) and the input pin of BT09VG _ 2.5mm. 100pF 100 pF 2.2pF BT09VG BT013 33nH BB 56pF 56pF B 1.5pF 0.75pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT09VG _ 4.0mm. 4. Distance between the center of the shunt cap(C7) and the output pin of BT09VG _ 6.2mm. *Skipping C3 reduces device ruggedness. Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier BeRex ●website: www.berex.com ● email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Performance Variation with Supply Voltage BeRex ●website: www.berex.com ● email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 3500MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 C7 C5 RFout BT09VG C6 Tolerance C1 C2 C3 C4 C5 C6 100pF 1000pF 10uF 22pF 22pF 0.5pF ±5% ±5% ±20% ±5% ±5% ±5% C7 0.5pF ±5% L1 33nH ±5% Note: 10uF 1. PCB: 31mil thick FR4. 1000 pF 2. Distance between the center of the series cap(C7) and the input pin of BT09VG _ 2.5mm. 100pF 100 pF 0.5pF 22pF BT09VG BT013 BB B 33nH 22pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT09VG _ 8.5mm. 0.5pF Typical Performance BeRex ●website: www.berex.com ● email: [email protected] 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier BeRex ●website: www.berex.com ● email: [email protected] 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 PCB Mounting 0.40 Ø0.40 0.40 0.75 1.20 2.15 1.20 0.50 0.45 1.20 1.20 2.80 1.50 1.00 0.65 0.35 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ●website: www.berex.com ● email: [email protected] 16 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E BT09VG 5-4000 MHz Wideband Medium Power Amplifier Package Marking Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 YY = Year, WW = Working Week, XX = Wafer No. Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 1B Value: Passes <1000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ●website: www.berex.com ● email: [email protected] 17 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. E