BT09AG 5-4000 MHz Wideband Medium Power Amplifier Device Features OIP3 = 43.0 dBm @ 900 MHz Gain = 20.0 dB @ 900 MHz Output P1 dB = 24.5 dBm @ 900 MHz 50 Ω Cascadable Lead-free/RoHS-compliant SOT-89 SMT package Product Description Typical Performance1 BeRex’s BT09AG is a high performance and a high dynamic range amplifier in a low cost surface mount package(SOT-89) with a RoHS -compliant, that incorporates reliable heterojunction-bipolar-transistor (HBT) devices fabricated with InGaP GaAs technology. This device is designed for use where high linearity is required and features high OIP3 and P1 with low consumption current (85mA) and requires a few external matching components such as a DC blocking capacitors on the In/Output pin, a bypass capacitor and a RF choke for the out port. All devices are 100% RF/DC tested. Parameter Applications Frequency Unit 900 1900 2450 3500 MHz Gain 20.0 14.5 12.5 9.20 dB S11 -17.0 -22.0 -16.0 -17.0 dB -14.0 -16.0 -24.0 -23.0 dB 43.0 24.5 4.2 43.0 24.2 4.2 43.0 26.0 4.3 39.0 25.8 5.0 dBm dBm dB S22 2 OIP3 P1dB Noise Figure 1 Device performance _ measured on a BeRex evaluation board at 25°C, 50 Ω system. 2 OIP3 _ measured with two tones at an output of 14 dBm per tone separated by 1 MHz. Min. Bandwidth IC @ (Vc = 5V) VC RTH 5 140 Typical 160 5.0 50 Max. Unit 4000 180 MHz mA V °C/W Base station Infrastructure/RFID Commercial/Industrial/Military wireless system Application Circuits Vcc Bypass RF Choke RF In RF Out BT09AG DC Block DC Block Absolute Maximum Ratings Parameter Operating Case Temperature Storage Temperature Junction Temperature Operating Voltage Supply Current Input RF Power Rating -40 to +85 -55 to +155 +220 Unit °C °C °C +7.0 220 23 V mA dBm *Operation of this device above any of these parameters may result in permanent damage. *external matching circuit: refer to the page 5 to 13. BeRex ● website: www.berex.com ● email: [email protected] 1 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier V-I Characteristics BeRex SOT89 Evaluation Board BeRex Evaluation Board *Dielectric constant _ 4.2 *RF pattern width 52mil *31mil thick FR4 PCB Typical Device Data S-parameters (Vc=5V, Ic=162mA, T=25°C) BeRex ● website: www.berex.com ● email: [email protected] 2 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier S-Parameter (Vdevice = 5.0V, Icc = 162mA, T = 25 °C, calibrated to device leads) Freq [MHz] S11 S11 S21 S21 S12 S12 S22 S22 dB Ang dB Ang dB Ang dB Ang 100 500 1000 1500 2000 2500 3000 3500 4000 -4.07 -3.168 -2.660 -2.673 -2.835 -3.238 -3.108 -2.733 -2.13 176.11 154.36 124.21 95.30 66.61 32.55 -5.552 -42.25 -71.93 23.805 20.639 16.421 13.291 11.151 9.711 8.137 6.121 4.604 162.696 108.6 66.7556 37.077 9.186 -19.52 -49.49 -78.61 -100.97 -31.49 -30.63 -29.14 -27.53 -25.83 -24.37 -23.08 -23.30 -22.79 0.3816 2.108 -3.335 -12.30 -22.90 -40.16 -63.43 -84.36 -104.55 -10.62 -8.770 -7.815 -7.601 -8.033 -9.343 -10.36 -9.213 -7.32 179.54 164.09 137.25 115.23 94.350 70.088 33.584 -8.5102 -41.052 Typical Performance (Vd = 5V, Ic = 162mA, T = 25°C) BeRex Freq MHz 70 170 240 500 900 1900 2450 S21 dB 24.7 25 24.8 23 20.0 14.5 12.5 S11 dB -18 -19 -20 -17 -17 -22 -16 S22 dB -18 -16 -26 -16 -14 -16 -24 P1 dBm 24.5 25.5 25 24.5 24.5 24.2 26 OIP3 dBm 39 40 40 41.5 43 43 43 NF dB 3.7 3.8 3.9 3.8 4.2 4.2 4.3 ● website: www.berex.com ● email: [email protected] 3 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier WCDMA 6FA 2140 –55dBc WCDMA 6FA 2140 –60dBc BeRex ● website: www.berex.com ● email: [email protected] 4 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier ACLR Application Circuit: 70~500 MHz Schematic Diagram C1 C2 C3 C4 L2 C5 BT09AG C6 BeRex ● website: www.berex.com 70MHz 170MHz 240MHz 500MHz C1 100pF 100pF 100pF 100pF C2 100pF 100pF 100pF 100pF C3 10uF 10uF 10uF 10uF C4 8200pF 8200pF 8200pF 8200pF C5 8200pF 8200pF 8200pF 8200pF C6 86pF 33pF 22pF 10pF L1 330nH 100nH 100nH 100nH L2 47nH 18nH 12nH 4.7nH +5V L1 RFin BOM RFout ● email: [email protected] 5 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 6 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 900 MHz Schematic Diagram BOM C2 C1 C3 +5V L1 RFin L2 C4 C7 C5 BT09AG C6 L3 RFout C1 C2 C3 C4 C5 C6 C7 L1 L2 L3 Tolerance 100pF 1000pF 10uF 100pF 100pF 8pF 10pF 39nH 1.8nH 6.8nH ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% ±5% ±5% Note: 1. PCB: 31mil thick FR4. 10uF 1000 pF 100pF 100 pF 1.8nH BT09AG BT013 100pF 100pF B 8pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 3.5mm. 39nH BB 10pF 2. Distance between the center of the series inductor (L2) and the input pin of BT09AG _ 2.5mm. 6.8nH 4. Distance between the center of the series cap(C7) and the output pin of BT09AG _ 3.5mm. 5. Distance between the center of the shunt inductor (L3) and the output pin of BT09AG _ 6.0mm. BeRex ● website: www.berex.com ● email: [email protected] 7 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 8 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 1900MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin L2 C4 C5 RFout BT09AG C6 C7 C1 C2 C3 C4 C5 C6 C7 L1 L2 Tolerance 100pF 1000pF 10uF 100pF 100pF 2pF 1.2pF 39nH 1.2nH ±5% ±5% ±20% ±5% ±5% ±5% ±5% 5% 2% Note: 10uF 2. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 1.0mm. 1000 pF 100pF 100 pF BT09AG BT013 39nH BB 100pF 100pF B 8pF 1.2nH 1. PCB: 31mil thick FR4. 1.2pF 3. Distance between the center of the series inductor(L2) and the output pin of BT09AG _ 3.5mm. 4. Distance between the center of the shunt cap(C7) and the output pin of BT09AG _ 7.2mm. Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 9 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier BeRex ● website: www.berex.com ● email: [email protected] 10 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 2450MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C4 C7 C5 RFout BT09AG C6 C8 C1 C2 C3 C4 C5 C6 C7 C8 L1 Tolerance 100pF 1000pF 10uF 100pF 100pF 1pF 2.5pF 0.5pF 39nH ±5% ±5% ±20% ±5% ±5% ±5% ±5% ±5% 5% Note: 10uF 1000 pF 2. Distance between the center of the series cap(C7) and the input pin of BT09AG _ 2.5mm. 100pF 100 pF 2.5pF BT09AG BT013 BB 100pF B 1pF 1. PCB: 31mil thick FR4. 39nH 100pF 0.5pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 3.5mm. 4. Distance between the center of the shunt cap(C8) and the output pin of BT09AG _ 9.0mm. Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 11 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier BeRex ● website: www.berex.com ● email: [email protected] 12 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Application Circuit: 3500MHz Schematic Diagram BOM C1 C2 C3 +5V L1 RFin C7 C4 C5 RFout BT09AG C6 C8 Tolerance C1 C2 C3 C4 C5 C6 100pF 1000pF 10uF 22pF 22pF 0.5pF ±5% ±5% ±20% ±5% ±5% ±5% C7 0.5pF ±5% C8 L1 0.5pF 33nH ±5% ±5% Note: 1. PCB: 31mil thick FR4. 10uF 1000 pF 2. Distance between the center of the series cap(C7) and the input pin of BT09AG _ 2.5mm. 100pF 100 pF 0.5pF BT09AG BT013 33nH BB 22pF 22pF B 0.5pF 3. Distance between the center of the shunt cap(C6) and the input pin of BT09AG _ 9.2mm. 0.5pF 4. Distance between the center of the shunt cap(C8) and the output pin of BT09AG _ 8.0mm. Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 13 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Typical Performance BeRex ● website: www.berex.com ● email: [email protected] 14 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern 0.40 1.30 PCB Mounting 0.40 Ø0.40 0.40 0.75 1.20 2.15 1.20 0.50 0.45 1.20 1.20 2.80 1.50 1.00 0.65 0.35 Note : All dimension are in millimeters PCB lay out _ on BeRex website BeRex ● website: www.berex.com ● email: [email protected] 15 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C BT09AG 5-4000 MHz Wideband Medium Power Amplifier Tape & Reel SOT89 Packaging information: Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns.) MSL / ESD Rating ESD Rating: Class 1B Value: Passes <1000V Test: Human Body Model (HBM) Standard: JEDEC Standard JESD22-A114B MSL Rating: Level 1 at +265°C convection reflow Standard: JEDEC Standard J-STD-020 NATO CAGE code: 2 BeRex N 9 6 F ● website: www.berex.com ● email: [email protected] 16 Specifications and information are subject to change and products may be discontinued without notice. BeRex is a trademark of BeRex. All other trademarks are the property of their respective owners. © 2010 BeRex Rev. C