BeRex BT09VG 5-4000 MHz Wideband Medium Power Amplifier Device Features 41dBm OIP3 at 13dBm/tone at 1900MHz 22.0 dB Gain at 900MHz 27dBm P1dB at 2450MHz Highly Reliable InGaP/GaAs HBT Technology Lead-free/Green/RoHS compliant SOT-89 package Application: commercial, space, military wireless system Electrical Specifications (Ta = 25C, Vs = 5.0V) Parameters Test Conditions Min Frequency Range Gain S11 S22 OIP3 P1dB IS-95 CH Power @-45dBc ACPR NF Ic Vc Rth 900MHz 1900MHz 2450MHz 3500MHz 900MHz 1900MHz 2450MHz 3500MHz 900MHz 1900MHz 2450MHz 3500MHz 900MHz 1900MHz 2450MHz 3500MHz 900MHz 1900MHz 2450MHz 3500MHz 900MHz 1900MHz 900MHz 1900MHz Vc = 5.0V Thermal Resistance 5 20.5 14.5 12.5 9.8 37.0 39.0 39.0 40.0 23.5 24.5 26.0 24.0 140 Typ 21.5 15.5 13.5 10.8 -16 -30 -14 -15 -24 -19 -19 -14 39.0 41.0 41.0 42.0 24.5 25.5 27.0 25.0 18.0 18.5 3.7 4.0 160 5.0 50 Max Unit 4000 22.5 16.5 14.5 11.8 MHz dB dB dB dBm dBm dBm dB 180 mA V C/W Test conditions unless otherwise noted. 1. Device performance is measured on BeRex evaluation board at 25C, 50 ohm system 2. OIP3 measured with two tones at an output power of 13dBm separated by 1MHz. http: //www.berex.com BeRex BT09VG Absolute Maximum Ratings Parameters Rating Operating Case temperature Storage Temperature Junction Temperature Supply Voltage Input RF Power -40 to +85C -55 to +125C +220C +7V 23dBm Operation of this device above any of these parameters may result in permanent damage. [Generic SOT89 Evaluation Board] [I-V Characteristics] 300 +25C -30C 250 BeRex +85C Ic [mA] 200 Evaluation Board 150 100 MMIC Innovator *Dielectric constant is 4.2 *RF pattern width 52mil *31mil thick FR4 PCB 50 0 2 3 4 5 6 7 Vc [V] http: //www.berex.com BeRex BT09VG Typical Device Data S-parameters (Vc=5V, Ic=160mA, T=25C) S-Parameter (5V/160mA) Freq [MHz] S11 Mag S11 Ang S21 Mag S21 Ang S12 Mag S12 Ang S22 Mag S22 Ang 100 500 1000 1500 2000 2500 3000 3500 4000 0.65 0.74 0.79 0.81 0.83 0.85 0.88 0.92 0.96 -180.00 180.00 170.00 150.00 140.00 130.00 120.00 110.00 98.00 16.00 11.00 7.00 5.00 3.90 3.20 2.80 2.50 2.20 170.00 130.00 98.00 82.00 69.00 57.00 46.00 35.00 23.00 0.03 0.03 0.03 0.03 0.04 0.04 0.04 0.04 0.05 2.50 8.90 14.00 18.00 19.00 19.00 18.00 14.00 11.00 0.30 0.38 0.42 0.44 0.46 0.45 0.45 0.48 0.51 -170.00 -170.00 180.00 170.00 170.00 160.00 150.00 140.00 140.00 http: //www.berex.com BeRex BT09VG WCDMA 6FA 2140 -55dBc WCDMA 6FA 2140 -60dBc http: //www.berex.com BeRex BT09VG ACLR Application Circuit: 900 MHz Schematic Diagram BOM Tolerance C1 100pF ±5% C2 7.5pF ±5% C3 100pF ±5% C4 1000pF C5* 10uF C6 10pF ±5% ±20% ±5% C7 L1 L2 *Skipping C5 reduces device ruggedness. 100pF 39nH 6.8nH ±5% 5% 2% http: //www.berex.com BeRex BT09VG Typical Performance 0 0 -5 -5 -10 -10 -20 S22 [dB] -15 -25 -30 -35 -40 -20 -50 +25C -30C -55 +85C -45 +25C -30C +85C -25 -60 -30 800 850 900 950 800 1000 850 950 1000 Freq [MHz] Freq [MHz] 30 24 60 Po G PAE 23 25 50 22 20 40 15 30 10 20 5 10 Po, G S21 [dB] 900 21 20 PAE [%] S11 [dB] -15 +25C 19 -30C +85C 0 18 800 850 900 950 0 -12 1000 -8 -4 0 4 8 Pin [dBm] Freq [MHz] 900MHz, 885KHz offset 9-Ch FWD, IS-95 F1=900MHz, F2=901MHz 44 0 +25C -30C +85C -10 -20 ACPR [dBc] OIP3 [dBm] 42 40 38 -30 -40 -50 -60 36 +25C -30C -70 +85C -80 34 10 12 14 16 Po, 2tone [dBm] 18 20 8 10 12 14 16 18 20 Po [dBm] http: //www.berex.com BeRex BT09VG Performance Variation with Supply Voltage 28 24 +25C -30C +85C 27 P1dB [dBm] S21 [dB] 23 22 26 25 24 21 23 +25C 20 -30C +85C 22 4.5 5 5.5 6 4.5 5 Vc [V] 5.5 6 Vc [V] Po @ACPR=-45dBc (900MHz, 9-Ch FWD, 885KHz offset, IS-95) Po=16dBm F1=900MHz, F2=901MHz 42 22 21 20 38 Po [dBm] OIP3 [dBm] 40 36 19 18 17 34 16 +25C -30C +85C +25C -30C +85C 15 32 4.5 5 5.5 6 4.5 5 5.5 6 Vc [V] Vc [V] Application Circuit: 1900 MHz Schematic Diagram BOM Tolerance C1 100pF ±5% C2 2.4pF ±5% C3 2.7pF ±5% C4 100pF C5 1000pF C6* 10uF C7 C8 L1 L2 *Skipping C6 reduces device ruggedness. 1.2pF 100pF 39nH 1nH ±5% ±5% ±20% ±5% ±5% 5% 2% http: //www.berex.com BeRex BT09VG Typical Performance 0 0 +25C -30C +85C -5 -10 -5 -10 -15 -20 S22 [dB] S11 [dB] -15 -20 -25 -25 -30 -35 -30 -40 -35 +25C -30C -45 -40 -50 -45 -55 1800 1850 1900 1950 +85C 1800 2000 1850 1900 1950 2000 Freq [MHz] Freq [MHz] 30 17 70 Po 16.5 25 16 20 G PAE 60 15.5 15 40 15 30 PAE [%] Po, G S21 [dB] 50 10 20 +25C 14.5 5 -30C 10 +85C 14 0 1800 1850 1900 1950 2000 0 -5 0 Freq [MHz] 5 10 15 Pin [dBm] 1900MHz, 885KHz offset 9-Ch FWD, IS-95 F1=1900MHz, F2=1901MHz 45 0 +25C -30C +85C -10 -20 41 ACPR [dBc] OIP3 [dBm] 43 39 -30 -40 -50 -60 37 +25C -30C -70 +85C 35 -80 10 12 14 16 Po, 2tone [dBm] 18 20 10 12 14 16 18 20 Po [dBm] http: //www.berex.com BeRex BT09VG Performance Variation with Supply Voltage 28 18 +25C -30C +85C 27 P1dB [dBm] S21 [dB] 17 16 26 15 25 14 24 +25C 4.5 5 5.5 6 4.5 -30C 5 Vc [V] +85C 5.5 6 Vc [V] Po=16dBm F1=1900MHz, F2=1901MHz Po @ACPR=-45dBc (1900MHz, 9-Ch FWD, 885KHz offset, IS-95) 44 22 43 Po [dBm] OIP3 [dBm] 21 42 41 40 39 20 19 18 17 +25C -30C +85C +25C 38 -30C +85C 16 4.5 5 5.5 6 4.5 5 Vc [V] 5.5 6 Vc [V] Application Circuit: 2450 MHz Schematic Diagram BOM C1 100pF C2 1.2pF C3 1.8pF C4 100pF C5 1000pF C6* 10uF C7 0.5pF C8 100pF L1 39nH *Skipping C6 reduces device ruggedness. Tolerance ±5% ±5% ±5% ±5% ±5% ±20% ±5% ±5% 5% http: //www.berex.com BeRex BT09VG Typical Performance 0 0 +25C -30C +85C -5 +25C -30C -5 +85C -10 S22 [dB] S11 [dB] -10 -15 -20 -15 -20 -25 -25 -30 -35 -30 2350 2400 2450 2500 2550 2350 2400 Freq [MHz] 2450 2500 2550 Freq [MHz] 30 17 70 Po 16 G PAE 60 25 50 15 13 40 15 30 PAE [%] 14 Po, G S21 [dB] 20 10 12 20 +25C 5 -30C 11 10 +85C 10 0 2350 2400 2450 2500 2550 Freq [MHz] 0 -5 0 5 10 15 Pin [dBm] F1=2450MHz, F2=2451MHz +25C -30C +85C 45 OIP3 [dBm] 43 41 39 37 35 10 12 14 16 18 20 Po, 2tone [dBm] http: //www.berex.com BeRex BT09VG Performance Variation with Supply Voltage 30 16 +25C -30C +85C 29 S21 [dB] P1dB [dBm] 15 14 28 27 26 +25C - 30C +85C 25 13 4.5 5 5.5 4.5 6 5 5.5 6 Vc [V] Vc [V] Po @ACPR=-45dBc (2450MHz, 9-Ch FWD, 885KHz offset, IS-95) Po=16dBm F1=2450MHz, F2=2451MHz 45 24 23 Po [dBm] OIP3 [dBm] 43 41 39 37 22 21 20 19 +25C - 30C +85C +25C - 30C +85C 18 35 4.5 5 5.5 6 4.5 5 Vc [V] 5.5 6 Vc [V] Application Circuit: 3500 MHz Schematic Diagram BOM Tolerance C1 22pF ±5% C2 0.3pF ±5% C3 100pF ±5% C4 1000pF ±5% C5 10uF ±20% C6 0.3pF ±5% C7 22pF ±5% L1 33nH 5% http: //www.berex.com BeRex BT09VG Typical Performance http: //www.berex.com BeRex BT09VG Package Outline Dimension Suggested PCB Land Pattern and PAD Layout PCB Land Pattern PCB Mounting 0.40 1.30 0.40 Ø0.40 0.40 0.75 1.20 2.00 1.20 0.50 1.20 1.20 2.80 1.50 1.00 0.65 Note : All dimension are in millimeters Visit http://www.berex.com for PCB layout http: //www.berex.com BeRex BT09VG Tape & Reel Packaging information: SOT89 Tape Width (mm): 12 Reel Size (inches): 7 Device Cavity Pitch (mm): 8 Devices Per Reel: 1000 Lead plating finish 100% Tin Matte finish. (All BeRex products undergoes a 1 hour, 150 degree C, Anneal bake to eliminate thin whisker growth concerns) MSL / ESD Rating ESD Rating Value Test Standard Class 1B Passes <1000V Human Body Model (HBM) JEDEC Standard JESD22-A114B MSL Rating Standard Level 1 at +265C convection reflow JEDEC Standard J-STD-020 NATO CAGE code: 2 N 9 6 F NOTICE BeRex Corporation reserves the right to make changes of product specification or to discontinue product at any time without notice. http: //www.berex.com