SURFACE MOUNT FUSES No. 419 SM This product is not recommended for new designs. Please refer to Littelfuse No. 451. UL 248-14, 125 V V,, F Specifications T ime-Current Packaging Quick Acting (F) Characteristic 000: Blister tape 18 cm reel (1000 pcs.) 001: Blister tape 33 cm reel (5000 pcs.) Tape width 12 mm Standard UL 248-14 CSA C22.2 No. 248.14 Materials Housing: Element: Terminals: Approvals cULus Recognized cULus Listed Operating TTemperature emperature -65 ºC to +125 ºC (consider de-rating) Features Heat resistant ceramic housing For line or low voltage applications Low voltage drop Internationally approved Also available as holder system 424 with mounted fuse 419 Dimensions (mm) max. 2,77 6,1 –0,2 1,45 -0,2 Further application infos see Fuseology: www.wickmanngroup.com/download/ fuseology.pdf 3,0 Stock Conditions +10 ºC to +60 ºC relative humidity ≤ 75 % yearly average, without dew, maximum value for 30 days-95 % Solderability 235 ºC, 2 s (IEC 60068-2-58) Soldering Heat Resistance 260 ºC, 10 s (IEC 60068-2-58) Minimum Cross Section, Copper 3,15 +0,05 1,96 +0,05 -65 ºC/+125 ºC/21 days (IEC 60068-1,-2-1,-2-2,-2-78) 24 cycles at 15 min each (IEC 60068-2-6) 10 - 60 Hz at 0.75 mm amplitude 60 - 2000 Hz at 10 g acceleration Further infos see: www.wickmanngroup.com Pad Layout Climatic Category Vibration Resistance WebLinks 1,45 -0,2 Ceramic Wire Copper alloy, silver plated Conducting path - min 0.175 mm2 Path thickness - min 35 µm from 7 A on Conducting path - min 0.35 mm2 Path thickness - min 70 µm up to 5 A Mounting 1,96 +0,05 Avoid circuit traces below the fuse Marking Limits for Pre-arcing Time Rated Current 62 mA ... 10.00 A 12.00 A ... 15.00 A 1.0 x IN F, Current Rating Unit Weight 2.0 x IN >2h >2h 0.23 g (approx.) < 5s < 30 s 62mA 125mA 250mA 500mA 750mA 1.00A 1.50A 2.00A 2.50A 3.00A 4.00A 5.00A 7.00A 8.00 A 10.00A 0062 0125 0250 0500 0750 1100 1150 1200 1250 1300 1400 1500 1700 1800 2100 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 125V 12.00A 15.00A 2120 2150 65V 65V Order Information 050912 Qty. 50 A / 125 V AC/DC 50-60 Hz cos ϕ = 1.0 35 A / 125 V AC 50-60 Hz cos ϕ = 1.0 100 A / 125 V DC 50 A / 65 V AC/DC 50-60 Hz cos ϕ = 1.0 300 A / 24 V DC OrderNumber WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Series 419 1600 1300 950 360 350 210 250 180 220 160 140 130 130 110 100 85 120 150 200 300 230 500 400 550 600 670 750 1200 1300 1400 0.00014 0.00085 0.0065 0.093 0.25 0.50 1.10 1.10 1.20 2.00 4.30 7.50 13.60 17.50 27.00 0.000095 0.00067 0.0052 0.074 0.20 0.42 0.95 0.90 0.95 1.70 3.42 6.80 11.60 13.80 23.50 70 58 1100 1200 65.00 125.00 52.0 103.00 Amp Code Americas Tel: +1 404 699-7820 E-mail: [email protected] Packaging Asia Tel: +852 26 14-1108 E-mail: [email protected] • • • • • • • • • • • • cURus cULus Permissible continuous operating current is ≤ 7 0 % at ambient temperature of 23 ºC (73.4 ºF). Rated Amp Voltage Breaking Voltage Drop Power Dissipation Melting Integral Approvals Current Code Rating Capacity 1.0 x IN 1.0 x IN 10 x IN typ. (mV) typ. (mW) max. (A2s) typ. (A2s) • • • • • Specifications are subject to change without notice China Tel: +86 21 6432 5146 E-mail: [email protected] SURFACE MOUNT FUSES 0 00 0, 10 No. 419 00 ,0 10 I-t Characteristics (Min-Max Limit) UL 248-14 test value 62 mA ... 10A test value 12A ... 15A 0 00 1, 10 Time (sec.) 0 10 1 1 0. 01 0. 1 00 0. 1 1.5 2 3 4 5 6 7 8 9 10 15 I Fault / I Rated Contact WICKMANN for individual I-t curves 050912 WebSite Europe Tel: +49 2302 662-107 www.wickmanngroup.com E-mail: [email protected] Americas Tel: +1 404 699-7820 E-mail: [email protected] Asia Tel: +852 26 14-1108 E-mail: [email protected] China Tel: +86 21 6432 5146 E-mail: [email protected]