PTC04-DB-HALL02 Daughter Board for Melexis PTC devices Features and Benefits PTC04 interface board for testing devices: 90275 90264 91205 Applications Experimental tool for Lab and Prototyping Production Equipment for Serial Programming Ordering Information Part No. PTC04-DBHall-02 Description Daughter Board (Board + rear panel PTC04) Accessories Part No. DLL’s for all supported products User Interfaces for supported products Description 1. Functional Diagram PTC04-DB-HALL02 Rev. 2.1 Page 1 of 8 Data Sheet July 09 PTC04-DB-HALL02 Daughter Board for Melexis PTC devices TABLE OF CONTENTS FEATURES AND BENEFITS ....................................................................................................................... 1 APPLICATIONS............................................................................................................................................ 1 ORDERING INFORMATION......................................................................................................................... 1 ACCESSORIES ............................................................................................................................................ 1 1. FUNCTIONAL DIAGRAM...................................................................................................................... 1 2. BOARD DESCRIPTION ........................................................................................................................ 3 2.1. BOARD LAYOUT ..............................................................................................................................................3 2.2. BOARD SCHEMATICS .......................................................................................................................................4 2.3. DAUGHTER BOARD CONNECTORS ...................................................................................................................5 2.3.1. Digital DB Connector (40 Pins).............................................................................................................5 2.3.2. Analog DB Connector (48 Pins).............................................................................................................6 2.4. APPLICATION CONNECTOR..............................................................................................................................7 3. DISCLAIMER ......................................................................................................................................... 8 PTC04-DB-HALL02 Rev. 2.1 Page 2 of 8 Data Sheet July 09 PTC04-DB-HALL02 Daughter Board for Melexis PTC devices 2. Board description 2.1. Board Layout • • • • • • J12: Jumpers to connect the measurement sense lines immediately to the force lines. These jumpers are needed when no force and sense is used. DB-ID: This ID keeps a few initial variables in mind. It allows for example to detect what DB is connected to the programmer and if the DB is not expired. J5, J6: Analog and Digital connector: See below for a detailed description. DB Connector: Connector to the application. See below for details. LED Indicators: 16 LED Indicators for the DB_IOdrv lines. J1: 10 pins Screw Terminal. It provides the same signals as the application connector. PTC04-DB-HALL02 Rev. 2.1 Page 3 of 8 Data Sheet July 09 PWM_OUT1 RXD0 ANA.COMP2 ANA.COMP0 VCC GND 2 DGND 20 10 2 5 6 9 12 15 16 19 A0 A2 A4 A6 D0 D2 D4 D6 Rd 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 DGND 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 40 Pin Header 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 J6 DGND AGND A1 A3 A5 A7 D1 D3 D5 D7 Wr Reset SDA F9 FB FD FF PE1 PE3 PE5 PE7 PWM_OUT3 TXD0 +36V IOdrv _0 IOdrv _1 IOdrv _2 IOdrv _3 IOdrv _7 IOdrv _6 IOdrv _5 IOdrv _4 +5V_DIG_CON 2 GND_SENSE_DIE +5V_DIG_CON ANA.COMP3 ANA.COMP1 VOUT_PPS4 VOUT_PPS3 VOUT_PPS2 VOUT_PPS1 +2.5V_REF_SUPPLY C2 TXD DGND RXD VDD_DIE OUT1_DIE OUT2_DIE OUT3_DIE GND_DIE 1 3 5 7 9 HEADER 5X2 J12 J18 CON1 J2 CON1 J10 CON1 J11 CON1 1 1 1 1 1 1 1 1 2 2 2 2 2 1K 1 D4 1K 1 D8 1K 1 D7 1K 1 D6 1K 1 D5 R4 R5 R6 R7 R8 D18 D19 D25 D26 D27 R14 1K2 R15 1K2 R16 1K2 R17 1K2 R18 1K2 DGND D12 R13 1K2 OUT3_DIE OUT2_DIE OUT1_DIE VDD_DIE 4 2 1 TxD DGND_RS RxD VDD_SENSE_DIE OUT1_SENSE_DIE OUT2_SENSE_DIE OUT3_SENSE_DIE GND_SENSE_DIE AGND Vout_PPS4 Vout_PPS3 Vout_PPS2 DGND 2 1 +5V_DIG_CON 4 +5V_DIG_CON 1K D11 R12 1K2 R10 DGND 1 1 1 1 1 1 1 1 4 Latch_1 +5V_DIG_CON +5V_DIG_CON DGND 4 NC7SZ02 U7 1 2 PE0 PE1 PE2 PE3 PE4 PE5 PE6 PE7 2 BY G21M D43 2 2 SENSE BY G21M D39 PWM_OUT3 1 2 3 4 5 6 7 8 J9 1 PWM_OUT1 Latch_2 1N4148 D44 2K2 R25 1N4148 D40 2K2 R23 BYG21M D34 D29 BY G21M 1 1 D30 BY G21M BYG21M D35 IOdrv _15 IOdrv _14 IOdrv _14 IOdrv _11 BY G21M BYG21M D21 D14 Flatcable_Line_1 Flatcable_Line_2 Flatcable_Line_3 Flatcable_Line_4 Flatcable_Line_5 Flatcable_Line_6 Flatcable_Line_7 Flatcable_Line_8 Flatcable_Line_9 Flatcable_Line_10 Flatcable_Line_11 Flatcable_Line_12 Flatcable_Line_13 Flatcable_Line_14 Flatcable_Line_15 BYG21M D20 D13 AGND OUT2_SENSE_DIE OUT3_DIE OUT3_SENSE_DIE VDD_DIE VDD_SENSE_DIE OUT2_DIE GND_SENSE_DIE GND_DIE OUT1_SENSE_DIE OUT1_DIE VDD_DIE VDD_SENSE_DIE OUT1_DIE OUT1_SENSE_DIE OUT2_DIE OUT2_SENSE_DIE OUT3_DIE OUT3_SENSE_DIE GND_DIE GND_SENSE_DIE DGND+5V_DIG_CON NC7SZ02 U6 +5V_DIG_CON 2 1K 1 D3 R3 2 2 1K 1 D2 R2 1K 2 D9 +5V_DIG_CON 1 D1 BYG21M D22 D15 BYG21M D36 D31 BY G21M 1 8 7 6 5 8 7 6 5 8 7 6 5 8 7 6 5 1 1 MAX4656 NO VIN N.C. U12 +36V 1 COM N.C. GND V+ C11 MAX4656 C10 COM N.C. GND V+ 1 COM N.C. GND V+ C8 COM N.C. GND V+ C7 NO VIN N.C. U11 +36V MAX4656 NO VIN N.C. U10 +36V MAX4656 NO VIN N.C. U8 +36V D32 1 2 3 4 100NF_Z5U 2 1 2 3 4 100NF_Z5U 2 1 2 3 4 100NF_Z5U 2 3 5 7 Vout_PPS1 100NF_Z5U 1 2 3 4 D38 +36V +36V +36V +36V DGND OUT1_SENSE_DIE OUT3_SENSE_DIE V-Cap 1 3 5 7 DGND A3 AGND 1 1 2 2 2 1 C1 +5V_DIG_CON IOdrv _0 1 3 2 IOdrv _1 +5V_DIG_CON 1 3 2 IOdrv _2 2 3 4 5 6 100NF_Z5U 1 2 3 4 Project : 90264\90275 Pickering 109-2-A-5/2D REL5 C9 COM N.C. GND V+ 1 of DGND C12 OUT1_DIE VDD_DIE 1 1 Rev OUT3_DIE OUT2_DIE OUT2_DIE 10NF_Z5U +5V_DIG_CON IOdrv _4 +36V +5V_DIG_CON PICKERING 112-1-A-5/2D REL4 1 Q2 3 PICKERING 112-1-A-5/2D 1 3 2 2 +36V 100NF_Z5U 2 PICKERING 112-1-A-5/2D MAX4656 +36V D10 BAT48 REL1 AGND REL2 NO VIN N.C. U9 4 1 BS170/SOT23 +36V COM N.C. GND V+ 1 2 3 4 Schematic : PTC04-DB-HALL02 Tuesday , January 03, 2006 Sheet BYG21M D42 BYG21M D41 8 7 IOdrv _13 6 5 5K6 R24 5K6 R22 4 BY G21M D28 1000uF 4 MAX4656 NO VIN N.C. U3 C4 Q7 BS170/SOT23 Q4 R21 15 Date: IOdrv _9 8 7 6 5 +5V_DIG_CON R19 300 AGND Size +5V_DIG_CON PE3 PE2 +5V_DIG_CON BS170/SOT23 IOdrv _12 Vout_PPS3 1 +5V_DIG_CON IOdrv _3 V-Pull-Up BS170/SOT23 Q6 R20 10K 1 V-Cap Q3 BS170/SOT23 AGND Q1 +5V_DIG_CON RXD0 AGND R11 100R 680R R9 Pickering 108-1-C-5/3D +5V_DIG_CON IOdrv _6 1 2 1 REL3 TXD0 IOdrv _8 1 BS170/SOT23 +5V_DIG_CON Vout_PPS4 IOdrv _10 Vout_PPS2 10 pins Screw_Terminal 1 2 3 4 5 6 7 8 9 10 BYG21M BY G21M BYG21M D37 2 D24 +36V AGND Q5 Vout_PPS1 BYG21M BY G21M J1 BYG21M D23 Pickering 108-1-C-5/3D 2 Vout_PPS3 1 BS170/SOT23 IO_5 D16 REL6 BY G21M Vout_PPS4 BY G21M P2 DB15_FEMALE 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 3 2 R1 RS test connector 1 2 3 J8 2 TxD TXD DGND_RS DGND RxD RXD 2 4 6 8 10 NC7SZ04 J4 CON1 J15 CON1 J16 CON1 J17 CON1 2 U14 U13 NC7SZ04 Wr F9 F8 IOdrv _8 IOdrv _9 IOdrv _10 IOdrv _11 IOdrv _12 IOdrv _13 IOdrv _14 IOdrv _15 RS mainboard connector 1 2 3 J7 VDD_SENSE_DIE OUT1_SENSE_DIE OUT2_SENSE_DIE SENSE 1 18 17 16 15 14 13 12 11 10 100NF_Z5U O1 O2 O3 O4 O5 O6 O7 O8 VCC ULN2803LW 100NF_Z5U C6 +5V_DIG_CON Meas_Line_P1 Meas_Line_P2 Meas_Line_P3 Meas_Line_P4 Meas_Line_N1 Meas_Line_N2 Meas_Line_N3 Meas_Line_N4 +36V_SUPPLY DIGITAL DB CONNECTOR1 48 pin header 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 J5 DGND 1 2 3 4 ANALOG DB CONNECTOR1 PCF8582AP A0 A1 A2 VSS IO_8 IO_9 IO_10 IO_11 IO_12 IO_13 IO_14 IO_15 +5V_DIG_CON IO_8 IO_9 IO_10 IO_11 IO_12 IO_13 IO_14 IO_15 DGND I1 I2 I3 I4 I5 I6 I7 I8 GND +5V_DIG_CON +5V_DIG_CON 100NF_Z5U 2 DGND 100NF_Z5U VDD PTC SCL SDA U2 C5 AGND 8 7 6 5 1 C3 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 1 74HCT373 OC G D0 D1 D2 D3 D4 D5 D6 D7 U4 SCL F8 FA FC FE PE0 PE2 PE4 PE6 ISENSE_PPS4 ISENSE_PPS3 ISENSE_PPS2 ISENSE_PPS1 SCL SDA +5V_DIG_CON +5V_DIG_CON DGND 3 4 7 8 13 14 17 18 1 Latch_211 D0 D1 D2 D3 D4 D5 D6 D7 VCC GND 74HCT373 20 10 DGND 3 2 U1 DGND OC G +5V_DIG_CON DGND 1 Latch_111 1 2 3 4 5 6 7 8 9 5 IO_0 IO_1 IO_2 IO_3 IO_7 IO_6 IO_5 IO_4 1 IO_0 IO_1 IO_2 IO_3 IO_4 IO_5 IO_6 IO_7 1 2 5 6 9 12 15 16 19 1 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 DGND 1 3 2 + D0 D1 D2 D3 D4 D5 D6 D7 1 2 1 2 1 2 2 1 2 1 2 1 2 1 2 2 1 2 1 2 1 2 1 2 1 2 1 2 2 1 2 1 2 2 1 AGND AGND U5 AGND 3 2 2 1 2 3 5 3 5 3 5 3 3 2 1 3 4 7 8 13 14 17 18 AGND AGND AGND AGND AGND AGND AGND AGND AGND 3 2 Page 4 of 8 AGND PTC04-DB-HALL02 Rev. 2.1 AGND 1 2 D0 D1 D2 D3 D4 D5 D6 D7 PTC04-DB-HALL02 Daughter Board for Melexis PTC devices 2.2. Board Schematics Data Sheet July 09 PTC04-DB-HALL02 Daughter Board for Melexis PTC devices 2.3. Daughter board Connectors The main board has two connectors to the interface with the application. The PTC allows adding a full PCB in between. This daughter board can be mounted on the two connectors. In some exceptional cases, a daughter board contains only a few wires from the Analog connector to the application connector. The pins on of the connectors are described below. ANALOG DB CONNECTOR DIGITAL DB CONNECTOR A0 A2 A4 A6 D0 D2 D4 D6 Rd SCL F8 FA FC FE PE0 PE2 PE4 PE6 DGND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 40 Pin Header A1 A3 A5 A7 D1 D3 D5 D7 Wr Reset SDA F9 FB FD FF PE1 PE3 PE5 PE7 +5V_Digital_Supply 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 ISENSE_PPS1 ISENSE_PPS2 ISENSE_PPS3 ISENSE_PPS4 ANA.COMP0 ANA.COMP2 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 Meas_Line_P1 Meas_Line_P2 Meas_Line_P3 Meas_Line_P4 Meas_Line_N1 Meas_Line_N2 Meas_Line_N3 Meas_Line_N4 +36V_SUPPLY +2.5V_REF_SUPPLY VOUT_PPS1 VOUT_PPS2 VOUT_PPS3 VOUT_PPS4 ANA.COMP1 ANA.COMP3 48 pin header AGND AGND 2.3.1. Digital DB Connector (40 Pins) Mainly, the digital connector is meant to expand the programmer to extra needs. Address lines A0-A7 together with the Map Select Lines F8-FF allows to direct access an area of 2 K. Examples would be adding a simple addressed I/O register by using the selection lines. If more complexity is needed, a full FPGA can be mounted on the DB board Pins 1–8 9 – 16 17 18 20 Names A0 – A7 D0 – D7 Rd Wr Reset 21-22 23-30 31-38 SCL / SDA F8,F9,…,FF Port E 39 40 Dgnd +5V Digital Description Address lines Data Lines active during Rd or Wr signals Read: A negative pulse will indicate a sampling of the data on the Data Bus Write: A Negative pulse will indicate when data is available on the Data Bus This signal goes low by powering the PTC or by pressing the reset button. This line can be pulled low by application. Check firmware documentation for resetting by software. I2c Bus CS lines when the address areas are accessed Note: These pins are limited to 5 Volt input\output!!!! The full Port E of the Atmega core is mounted to these pins. This allows us to use advanced features like PWM, UARTS, Time Measurements, etc…. By using firmware that supports these, functions, application specific requirements can be fulfilled. Digital Ground 5 Volt Digital Supply. Maximum current to get out of this supply: 250mA Note: All the pins are limited to 5 Volt input\output!!!! However, there are Protections, please take precautions in order to avoid damage of the main board. PTC04-DB-HALL02 Rev. 2.1 Page 5 of 8 Data Sheet July 09 PTC04-DB-HALL02 Daughter Board for Melexis PTC devices 2.3.2. Analog DB Connector (48 Pins) Mainly, the analog connector provides all the analog signals and measure possibilities. Pins 28,32,36 40 27,31,35,39 Names PPS 1-3 PPS 4 Isense_PP1-4 2,4,6,8 10,12,14,16 17,19,21,23 ExtMeas1-4Pos ExtMeas1_4Neg Shtd_PPS1-4 43,44,47,48 AnaComp0-3 18 24 All other +35V_Supply +2.5V Ref AGND Description Output of the Programmable Supplies Output of the Fast DAC Programmable Power Supply Outputs (Driver outputs before Rsens) for current evaluations. These outputs could be used to connect to the analog comparators in order to create fast digital signals based on current. There are 4 differential inputs for making measurements The negative inputs of ExtMeas1-4Pos Outputs that shows the status of the Drivers. Signals are meant to connect LED's to put the front panel Input (limited to 5V) See *Note. Fast Level comparators in order to remove time consuming measurement Supply to extend the daughter board with some extra drivers Output of internal reference Analog Ground Note: All the pins are limited to 35 Volt input\output!!!! However, there are Protections, please take precautions in order to avoid damage of the main board. * Note: Some pins are protected and limited to 5 Volt!!!! However, there are Protections, please take precautions in order to avoid damage of the main board. PTC04-DB-HALL02 Rev. 2.1 Page 6 of 8 Data Sheet July 09 PTC04-DB-HALL02 Daughter Board for Melexis PTC devices 2.4. Application Connector There are two ways to connect the application to PTC04: 2.4.1. Pins 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 2.4.2. Pins 1 2 3 4 5 6 7 8 9 10 The DB15_Female connector (application connector) Names VDD_DIE OUT2_DIE GND_DIE OUT1_ DIE NC OUT3_ DIE NC NC VDD_SENSE_DIE GND_SENSE_DIE OUT1_SENSE_DIE NC OUT2_SENSE_DIE OUT3_SENSE_DIE NC Description Device Supply Device Output 2 Analog Ground Device Device Output 1 Not Connected Device Output 3 Not Connected Not Connected Sensing Device Supply Sensing Analog Ground Device Sensing Device Output 1 Not Connected Sensing Device Output 2 Sensing Device Output 3 Not Connected The screw terminal Names VDD_DIE VDD_SENSE_DIE OUT1_ DIE OUT1_SENSE_DIE OUT2_DIE OUT2_SENSE_DIE OUT3_ DIE OUT3_SENSE_DIE GND_DIE GND_SENSE_DIE PTC04-DB-HALL02 Rev. 2.1 Description Device Supply Sensing Device Supply Device Output 1 Sensing Device Output 1 Device Output 2 Sensing Device Output 2 Device Output 3 Sensing Device Output 3 Analog Ground Device Sensing Analog Ground Device Page 7 of 8 Data Sheet July 09 PTC04-DB-HALL02 Daughter Board for Melexis PTC devices 3. Disclaimer Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Melexis reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with Melexis for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by Melexis for each application. The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis’ rendering of technical or other services. © 2009 Melexis NV. All rights reserved. For the latest version of this document, go to our website at www.melexis.com Or for additional information contact Melexis Direct: Europe, Africa, Asia: America: Phone: +32 1367 0495 E-mail: [email protected] Phone: +1 603 223 2362 E-mail: [email protected] ISO/TS 16949 and ISO14001 Certified PTC04-DB-HALL02 Rev. 2.1 Page 8 of 8 Data Sheet July 09