PTC04-DB-HALL01 Daughter Board for Melexis PTC devices Features and Benefits PTC04 interface board for testing devices 90215 90224 90244 90251 90277 90280 Applications Experimental tool for Lab and Prototyping Production Equipment for Serial Programming Ordering Information Part No. PTC04-DBHall Description Default Daughter Board (Board + rear panel PTC04) 1. Accessories Part No. DLL’s for all supported products User Inter Faces for supported products Description 2. Functional Diagram PTC04-DB-HALL01 Rev. 2.0 Page 1 of 8 Data Sheet July 09 PTC04-DB-HALL01 Daughter Board for Melexis PTC devices TABLE OF CONTENTS FEATURES AND BENEFITS ....................................................................................................................... 1 APPLICATIONS............................................................................................................................................ 1 ORDERING INFORMATION......................................................................................................................... 1 ACCESSORIES ............................................................................................................................................ 1 1. FUNCTIONAL DIAGRAM...................................................................................................................... 1 2. BOARD DESCRIPTION ........................................................................................................................ 3 2.1. BOARD LAYOUT ..............................................................................................................................................3 2.2. BOARD SCHEMATIC ........................................................................................................................................4 2.3. DAUGHTER BOARD CONNECTORS ...................................................................................................................5 2.3.1. Digital DB Connector (40 Pins).............................................................................................................5 2.3.2. Analog DB Connector (48 Pins).............................................................................................................6 2.4. APPLICATION CONNECTOR..............................................................................................................................6 2.4.1. DB15 ......................................................................................................................................................6 2.4.2. 14 Pins Screw Terminal .........................................................................................................................7 3. DISCLAIMER ......................................................................................................................................... 8 PTC04-DB-HALL01 Rev. 2.0 Page 2 of 8 Data Sheet July 09 PTC04-DB-HALL01 Daughter Board for Melexis PTC devices 3. Board description 3.1. Board Layout Figure 3-1 J1: Jumpers to connect the measurement sensing lines immediately to the force lines. These jumpers are needed when no force and sense is used. J3 and J4: These jumpers are future expansions in order to support PWM output measurements and are not needed for testing the 90251 or the 90277. DB-ID: This ID keeps a few initial variables in mind. It allows for example to detect what DB is connected to the programmer and if the DB is not expired. J5 and J6: these are the Analog and Digital connectors. See below for a detailed description. Application Connector: Connection to the application. See below for details J9: 14 pins screw terminal. It provides the same signals as the application connector. PTC04-DB-HALL01 Rev. 2.0 Page 3 of 8 Data Sheet July 09 8 7 6 5 1 2 3 4 Page 4 of 8 1 C1 2 CON48B 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 A0 A2 A4 A6 D0 D2 D4 D6 Rd DGND 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 40 Pin Header 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 1K 1K 1K R5 R6 R8 AGND ANA.COMP3 ANA.COMP1 VOUT_PPS4 VOUT_PPS3 VOUT_PPS2 VOUT_PPS1 +5V_DIG_CON A1 A3 A5 A7 D1 D3 D5 D7 Wr Reset SDA F9 FB FD FF PE1 PE3 PE5 PE7 +5V_Digital_Supply AGND +5V_DIG_CON +5V_DIG_CON GND_SENSE_DIE_2 +36V +5V_ANA_CON GND_SENSE_DIE_1 VDD_SENSE_DIE_1 OUT_SENSE_DIE_1 VDD_SENSE_DIE_2 OUT_SENSE_DIE_2 1K 2 R10 1K1 D8 2 2 2 2 2 2 1 D6 1 D5 1 D4 1 D3 1 D2 1 D7 1K 1K R4 R9 1K R3 +2.5V_REF_SUPPLY Meas_Line_P1 Meas_Line_P2 Meas_Line_P3 Meas_Line_P4 Meas_Line_N1 Meas_Line_N2 Meas_Line_N3 Meas_Line_N4 +36V_SUPPLY +5V_SUPPLY J6 DIGITAL DB CONNECTOR1 AGND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 J5 100NF_Z5U SCL F8 FA FC FE PE0 PE2 PE4 PE6 ANA.COMP2 ANA.COMP0 ISENSE_PPS4 ISENSE_PPS3 ISENSE_PPS2 ISENSE_PPS1 SHTD_PPS1 SHTD_PPS2 SHTD_PPS3 SHTD_PPS4 +5V_DIG_CON DGND +5V_DIG_CON A0 A1 A2 VSS PCF8582AP VDD PTC SCL SDA U2 ULN2803LW O1 O2 O3 O4 O5 O6 O7 O8 VCC I2C address : 1010 0000 SCL SDA +5V_DIG_CON DGND I1 I2 I3 I4 I5 I6 I7 I8 GND DGND J4 J3 +5V_DIG_CON 1 1 Vout_PPS4 IOdrv _3 Vout_PPS3 IOdrv _2 Vout_PPS2 Vout_PPS1 REL3 4 REL6 4 PICKERING 112-1-A-5/2D 2 3 1 D11 1N4001 1 JUMPER 2 JUMPER 2 1N4001 PICKERING 112-1-A-5/2D 2 3 1 VDD_DIE_1 VDD_SENSE_DIE_1 MEMO_DIE_1 GND_SENSE_DIE_1 GND_DIE_1 OUT_SENSE_DIE_1 OUT_DIE_1 VDD_DIE_2 VDD_SENSE_DIE_2 MEMO_DIE_2 GND_SENSE_DIE_2 GND_DIE_2 OUT_SENSE_DIE_2 OUT_DIE_2 PE6 PE5 +5V_DIG_CON D9 2 2 1 2 1 2 3 4 5 6 7 8 9 10 11 12 13 14 J9 2 2 D10 1N4148 D12 2K2 R12 2 1 2 1 3 5 7 3 4 5 6 3 4 5 6 100 R14 100 R13 +5V_DIG_CON IOdrv _0 1 3 5 7 9 11 1 2 OUT_DIE_2 3 5 7 MEMO_DIE_2 MEMO_DIE_1 +5V_DIG_CON IOdrv _1 OUT_DIE_2 VDD_DIE_2 OUT_DIE_1 VDD_DIE_1 VDD_SENSE_DIE_1 GND_SENSE_DIE_1 OUT_SENSE_DIE_1 VDD_SENSE_DIE_2 GND_SENSE_DIE_2 OUT_SENSE_DIE_2 +5V_DIG_CON IOdrv _5 Pickering 108-1-C-5/3D REL5 OUT_DIE_1 +5V_DIG_CON IOdrv _4 Jumper HEADER 6X2 2 4 6 8 10 12 J1 Pickering 109-2-A-5/2D REL2 Pickering 109-2-A-5/2D REL1 VDD_DIE_1 GND_DIE_1 OUT_DIE_1 VDD_DIE_2 GND_DIE_2 OUT_DIE_2 10K R11 10K R2 Pickering 108-1-C-5/3D REL4 1 Vout_PPS1 2K2 R7 1 Vout_PPS1 1N4148 14 pins Screw_terminal 1 Date: A3 Size VDD_DIE_2 VDD_SENSE_DIE_2 MEMO_DIE_2 GND_SENSE_DIE_2 OUT_SENSE_DIE_2 OUT_DIE_2 VDD_DIE_1 VDD_SENSE_DIE_1 MEMO_DIE_1 GND_SENSE_DIE_1 OUT_SENSE_DIE_1 OUT_DIE_1 D13 S1B VDD_DIE_2 VDD_SENSE_DIE_2 MEMO_DIE_2 GND_SENSE_DIE_2 GND_DIE_2 OUT_SENSE_DIE_2 OUT_DIE_2 VDD_DIE_1 VDD_SENSE_DIE_1 MEMO_DIE_1 GND_SENSE_DIE_1 GND_DIE_1 OUT_SENSE_DIE_1 OUT_DIE_1 1 D14 S1B D17 S1B AGND D21 S1B D25 S1B +36V Flatcable_Line_9 Flatcable_Line_10 Flatcable_Line_11 Flatcable_Line_12 Flatcable_Line_13 Flatcable_Line_14 Flatcable_Line_15 Flatcable_Line_1 Flatcable_Line_2 Flatcable_Line_3 Flatcable_Line_4 Flatcable_Line_5 Flatcable_Line_6 Flatcable_Line_7 P2 D33 S1B D35 S1B D31 S1B D27 S1B D23 S1B D18 S1B D22 S1B D30 S1B D34 S1B 1 of 90277\90251\90244\90215 Schematic : PTC04-DB-HALL01 Wednesday , Nov ember 28, 2007 Sheet Project : AGND D36 S1B D32 S1B D28 S1B D24 S1B D20 S1B D16 S1B 1 DB15_FEMALE D19 S1B D26 S1B D29 S1B 1 9 2 10 3 11 4 12 5 13 6 14 7 15 8 D15 S1B 1 2 2 1 1 1 D1 1 2 1 2 2 R1 1 1 2 IOdrv _0 IOdrv _1 IOdrv _2 IOdrv _3 IOdrv _4 IOdrv _5 IOdrv _6 IOdrv _7 1 18 17 16 15 14 13 12 11 10 1 2 1 2 U1 1 2 2 1 2 1 1 2 3 4 5 6 7 8 9 1 2 2 2 1 2 1 1 2 2 2 F8 F9 FA FB FC FD FE FF 1 1 2 2 1 2 2 1 1 2 1 2 PTC04-DB-HALL01 Rev. 2.0 2 +5V_DIG_CON 2.0 Rev PTC04-DB-HALL01 Daughter Board for Melexis PTC devices 3.2. Board Schematic DGND Data Sheet July 09 PTC04-DB-HALL01 Daughter Board for Melexis PTC devices 3.3. Daughter board Connectors The main board has two connectors to the interface with the application. The PTC allows adding a full PCB in between. This daughter board can be mounted on the two connectors. In some exceptional cases, a daughter board contains only a few wires from the Analog connector to the application connector. The pins on of the connectors are described below. ANALOG DB CONNECTOR DIGITAL DB CONNECTOR A0 A2 A4 A6 D0 D2 D4 D6 Rd SCL F8 FA FC FE PE0 PE2 PE4 PE6 DGND 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 40 Pin Header A1 A3 A5 A7 D1 D3 D5 D7 Wr Reset SDA F9 FB FD FF PE1 PE3 PE5 PE7 +5V_Digital_Supply 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 41 43 45 47 ISENSE_PPS1 ISENSE_PPS2 ISENSE_PPS3 ISENSE_PPS4 ANA.COMP0 ANA.COMP2 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 42 44 46 48 Meas_Line_P1 Meas_Line_P2 Meas_Line_P3 Meas_Line_P4 Meas_Line_N1 Meas_Line_N2 Meas_Line_N3 Meas_Line_N4 +36V_SUPPLY +2.5V_REF_SUPPLY VOUT_PPS1 VOUT_PPS2 VOUT_PPS3 VOUT_PPS4 ANA.COMP1 ANA.COMP3 48 pin header AGND AGND 3.3.1. Digital DB Connector (40 Pins) Mainly, the digital connector is meant to expand the programmer to extra needs. Address lines A0-A7 together with the Map Select Lines F8-FF allows to direct access an area of 2 K. Examples would be adding a simple addressed I/O register by using the selection lines. If more complexity is needed, a full FPGA can be mounted on the DB board Pins 1–8 9 – 16 17 18 20 Names A0 – A7 D0 – D7 Rd Wr Reset 21-22 23-30 31-38 SCL / SDA F8,F9,…,FF Port E 39 40 Dgnd +5V Digital Description Address lines Data Lines active during Rd or Wr signals Read: A negative pulse will indicate a sampling of the data on the Data Bus Write: A Negative pulse will indicate when data is available on the Data Bus This signal goes low by powering the PTC or by pressing the reset button. This line can be pulled low by application. Check firmware documentation for resetting by software. I2c Bus CS lines when the address areas are accessed Note: These pins are limited to 5 Volt input\output!!!! The full Port E of the Atmega core is mounted to these pins. This allows us to use advanced features like PWM, UARTS, Time Measurements, etc…. By using firmware that supports these, functions, application specific requirements can be fulfilled. Digital Ground 5 Volt Digital Supply. Maximum current to get out of this supply: 250mA Note: All the pins are limited to 5 Volt input\output!!!! However, there are Protections, please take precautions in order to avoid damage of the main board. PTC04-DB-HALL01 Rev. 2.0 Page 5 of 8 Data Sheet July 09 PTC04-DB-HALL01 Daughter Board for Melexis PTC devices 3.3.2. Analog DB Connector (48 Pins) Mainly, the analog connector provides all the analog signals and measure possibilities. Pins 28,32,36 40 27,31,35,39 Names PPS 1-3 PPS 4 Isense_PP1-4 2,4,6,8 10,12,14,16 17,19,21,23 ExtMeas1-4Pos ExtMeas1_4Neg Shtd_PPS1-4 43,44,47,48 AnaComp0-3 18 24 All other +35V_Supply +2.5V Ref AGND Description Output of the Programmable Supplies Output of the Fast DAC Programmable Power Supply Outputs (Driver outputs before Rsens) for current evaluations. These outputs could be used to connect to the analog comparators in order to create fast digital signals based on current. There are 4 differential inputs for making measurements The negative inputs of ExtMeas1-4Pos Outputs that shows the status of the Drivers. Signals are meant to connect LED's to put the front panel Input (limited to 5V) See *Note. Fast Level comparators in order to remove time consuming measurement Supply to extend the daughter board with some extra drivers Output of internal reference Analog Ground Note: All the pins are limited to 35 Volt input\output!!!! However, there are Protections, please take precautions in order to avoid damage of the main board. * Note: Some pins are protected and limited to 5 Volt!!!! However, there are Protections, please take precautions in order to avoid damage of the main board. 3.4. Application Connector 3.4.1. Pins 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 DB15 Names VDD A MEMO A VSS A OUT A VDD B MEMO B VSS B OUT B SENSING VDD A SENSING VSS A SENSING OUT A NC SENSING VDD B SENSING VSS B SENSING OUT B PTC04-DB-HALL01 Rev. 2.0 Description Supply Device A Analog Ground Device A Output Device A Supply Device B Analog Ground Device B Output Device B Sensing Supply Device A Sensing Analog Ground A Sensing Output Not Connected Sensing Supply Device B Sensing Analog Ground B Sensing Output Device B Page 6 of 8 Data Sheet July 09 PTC04-DB-HALL01 Daughter Board for Melexis PTC devices 3.4.2. Pins 1 2 3 4 5 6 7 8 9 10 11 12 13 14 14 Pins Screw Terminal Names VDD A SENSING VDD A MEMO A SENSING VSS A VSS A SENSING OUT A OUT A VDD B SENSING VDD B MEMO B SENSING VSS B VSS B SENSING OUT B OUT B PTC04-DB-HALL01 Rev. 2.0 Description Supply Device A Sensing Supply Device A Sensing Analog Ground A Analog Ground Device A Sensing Output Output Device A Supply Device B Sensing Supply Device B Sensing Analog Ground B Analog Ground Device B Sensing Output Device B Output Device B Page 7 of 8 Data Sheet July 09 PTC04-DB-HALL01 Daughter Board for Melexis PTC devices 4. Disclaimer Devices sold by Melexis are covered by the warranty and patent indemnification provisions appearing in its Term of Sale. Melexis makes no warranty, express, statutory, implied, or by description regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. Melexis reserves the right to change specifications and prices at any time and without notice. Therefore, prior to designing this product into a system, it is necessary to check with Melexis for current information. This product is intended for use in normal commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not recommended without additional processing by Melexis for each application. The information furnished by Melexis is believed to be correct and accurate. However, Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the technical data herein. No obligation or liability to recipient or any third party shall arise or flow out of Melexis’ rendering of technical or other services. © 2009 Melexis NV. All rights reserved. For the latest version of this document, go to our website at www.melexis.com Or for additional information contact Melexis Direct: Europe, Africa, Asia: America: Phone: +32 1367 0495 E-mail: [email protected] Phone: +1 603 223 2362 E-mail: [email protected] ISO/TS 16949 and ISO14001 Certified PTC04-DB-HALL01 Rev. 2.0 Page 8 of 8 Data Sheet July 09