17.3 mm (0.68 inch) General Purpose 5 x 7 Dot Matrix Alphanumeric Displays Technical Data Features Applications • • • • • Suitable for Indoor Use • Not Recommended for Industrial Applications, i.e. Operating Temperatures Requirements Exceeding 85°C or Below -35°C[1] • Extreme Temperature Cycling Not Recommended[2] • • • • • 5 x 7 Dot Matrix Font Viewable up to 12 Meters X-Y Stackable Industry Standard Pin-out 7.6 mm (0.3 in.) Dual-in-line (DIP) Leads on 2.54 mm (0.1 in.) Centers Choice of Colors Red or Green or AlGaAs Choice of Face Paint Colors Gray or Black Design Flexibility Common Row Anode or Common Row Cathode Categorized for Luminous Intensity Green Categorized for Color Description These displays have a 17.3 mm (0.68 inch) character height and use industry standard size and pin-out. The devices are available in either common row anode or common row cathode configurations. The displays come in either gray or black face paint and are available in a choice of high efficiency red (HER) or green colors or AlGaAs. HDSP-70xE Series HDSP-71xE Series HDSP-70xG Series HDSP-71xG Series HDSP-70xA Series HDSP-71xA Series These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/ cosmetic defects. For optimal intensity performance, please consider our industrial grade displays: • HDSP-L20x • HDSP-540x • HDSP-L10x Devices HER HDSP701E 703E 711E 713E Green HDSP701G 703G 711G 713G AlGaAs HDSP701A 703A 711A 713A Description 17.3 mm Gray Surface Common Row Anode 17.3 mm Gray Surface Common Row Cathode 17.3 mm Black Surface Common Row Anode 17.3 mm Black Surface Common Row Cathode Notes: 1. For details, please contact your local Agilent components sales office or an authorized distributor. 2 Package Dimensions 12.7 (0.50) MAX. 6.3 (0.25) 10.16 (0.40) 1.3 (0.05) PIN 1 2.54 (0.10) 2.54 (0.10) 17.78 MAX. (0.70) 12.7 (0.50) 15.24 (0.600) 2.54 (0.10) PIN 6 35 – ∅ 1.9 (0.075) PART NO. COL 1 2 3 4 5 ROW 1 8 – 21.8° 2 8 – 3 (0.118) 8 – 2.5 (0.098) 3 4 5.1 ± 0.5 (0.201) 12 – ∅ 0.5 (0.02) 5 6 7.62 (0.03) 7 NOTES: 1. ALL DIMENSIONS IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCE IS ± 0.25 mm (0.010). 3. FOR GREEN ONLY. Internal Circuit Diagram COMMON ANODE ROW COMMON CATHODE ROW COLUMN COLUMN 1 2 3 4 5 1 2 3 4 5 1 3 10 7 8 4 3 7 9 12 ROW ROW 1 12 1 1 2 11 2 2 3 2 3 11 4 9 4 10 5 4 5 8 6 5 6 5 7 6 7 6 x = ROW OR COLUMN NUMBER, x = PIN NUMBER COMMON ROW ANODE HDSP-701E/711E/ 701G/711G/701A/711A PIN COMMON ROW CATHODE HDSP-703E/713E/ 703G/713G/703A/713A PIN 1 COLUMN 1 CATHODE 1 ROW 1 CATHODE 2 3 ROW 3 ANODE COLUMN 2 CATHODE 2 3 ROW 2 CATHODE COLUMN 2 ANODE 4 5 6 ROW 5 ANODE ROW 6 ANODE ROW 7 ANODE 4 5 6 COLUMN 1 ANODE ROW 6 CATHODE ROW 7 CATHODE 7 8 COLUMN 4 CATHODE COLUMN 5 CATHODE 7 8 COLUMN 3 ANODE ROW 5 CATHODE 9 10 11 ROW 4 ANODE COLUMN 3 CATHODE ROW 2 ANODE 9 10 11 COLUMN 4 ANODE ROW 4 CATHODE ROW 3 CATHODE 12 ROW 1 ANODE 12 COLUMN 5 ANODE 3 Absolute Maximum Ratings at TA = 25°C Parameter Dot[1] Average Power per Peak Forward Current per Dot[1,2] (1/10 Duty Cycle, 0.1 ms Pulse Width) Average Forward Current per Dot[1] Reverse Voltage per Dot Operating Temperature Storage Temperature Lead Solder Temperature for 3 seconds [3] (1.6 mm [0.063 in.] below seating plane) HER HDSP-701E/ 711E/703E/ 713E 75 90 AlGaAs HDSP-701A/ 703A/711A/ 713A 75 125 Green HDSP-701G/ 711G/703G/ 713G 75 90 Units mW mA 23 5 –40 to +85 –40 to +85 260 23[3] 5 –40 to +85 –40 to +85 260 15[2] 5 –40 to +85 –40 to + 85 260 mA V °C °C °C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 35°C at 0.2 mA/°C. 3. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 5 seconds. Optical/Electrical Characteristics at TA = 25°C High Efficiency Red Devices HDSP- 701E 711E 703E 713E Parameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength Dominant Wavelength[2] Forward Voltage Symbol IV Min. 1.289 l PEAK ld VF Typ. 2.500 632 622 2.05 Reverse Voltage[3] Luminous Intensity Matching Ratio VR IV-M Max. Units mcd 3.40 2.50 1.60 5 nm nm V V 2:1 Test Conditions IF = 50 mA, 20% Duty Factor IF = 20 mA IF = 20 mA IF = 50 mA IF = 20 mA IF = 5 mA IR = 100 µA IF = 50 mA 20% Duty Factor 4 Optical/Electrical Characteristics at T A = 25°C, continued Green Devices HDSP- 701G 711G 703G 713G Parameter Luminous Intensity/Dot (Digit Average) [1] Peak Wavelength Dominant Wavelength [2] Forward Voltage Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol IV Min. 0.96 l PEAK ld VF VR IV-M Typ. 2.50 Max. Units mcd 568 573 1.80 1.60 5 2.25 3.40 2.60 nm nm V V 2:1 Test Conditions IF = 50 mA, 20% Duty Factor IF = 20 mA IF = 20 mA IF = 50 mA IF = 20 mA IF = 5 mA IR = 100 µA IF = 50 mA 20% Duty Factor AlGaAs Devices HDSP- 701A 711A 703A 713A Parameter Luminous Intensity/Dot (Digit Average)[1] Peak Wavelength Dominant Wavelength[2] Forward Voltage Voltage[3] Reverse Luminous Intensity Matching Ratio Symbol IV Min. 1.55 lPEAK ld VF VR IV-M Typ. 2.10 660 643 1.8 Max. Units mcd 2.0 2.0 1.5 5 nm nm V V 1.5:1 Test Conditions IF = 10 mA, 20% Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IF = 10 mA IF = 5 mA IR = 100 µA IF = 10 mA 20% Duty Factor Notes: 1. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 2. The dominant wavelength, ld, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 30 GREEN, HER 25 20 15 AlGaAs 10 5 0 0 20 40 60 80 100 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum Allowable Average Current Per Dot vs. Ambient Temperature. RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 4.0 3.5 GREEN, HER 3.0 2.5 AlGaAs 2.0 1.5 1.0 0.5 0 0 5 10 15 20 25 30 35 40 IF – DC FORWARD CURRENT – mA Figure 3. Relative Luminous Intensity vs. DC Forward Current. IF – FORWARD CURRENT PER SEGMENT – mA 35 90 80 AlGaAs HER 70 60 50 40 30 20 GREEN 10 0 1 2 4 3 5 VF – FORWARD VOLTAGE – V Figure 2. Forward Current vs. Forward Voltage. ηV – RELATIVE EFFICIENCY (NORMALIZED TO/AT 10 mA PER SEGMENT) IDC – MAXIMUM DC CURRENT PER SEGMENT – mA 5 1.4 RED 1.3 GREEN 1.2 1.1 AlGaAs 1.0 0.9 0.8 0 10 20 30 40 50 60 70 80 90 100 IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA Figure 4. Relative Efficiency (Luminous Intensity Per Unit Current Per Dot) vs. Peak Current Per Dot. 6 Intensity Bin Limits[1] (mcd at 50 mA, 20% Duty Factor) High Efficiency Red Bin name E F G H Green Bin name H I J K L Min. [2] 1.289 1.934 2.900 4.350 Min.[2] 0.96 1.44 2.15 3.23 4.85 Max.[2] 1.934 2.900 4.350 6.525 Max.[2] 1.44 2.15 3.23 4.85 7.28 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ± 10%. (mcd at 10 mA, 20% Duty Factor) AlGaAs Bin name I J Min.[2] 1.55 2.33 Max.[2] 2.33 3.49 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ± 10%. Color Bin Limits (Dominant Wavelength) Color Green Bin 2 3 4 5 Dominant Wavelength (nm) Min. Max. 573.6 576.5 570.6 573.5 567.6 570.5 564.5 567.5 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representatives for further clarification/information. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability datasheet 17.3 mm General Purpose 5 x 7 Dot Matrix Alphanumeric Displays. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6271 2451 India, Australia, New Zealand: (+65) 6271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 6271 2194 Malaysia, Singapore: (+65) 6271 2054 Taiwan: (+65) 6271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-5400EN November 27, 2002 5988-8400EN