Hall Effect Latch and Switch Quick Reference DownloadLink 5273

Hall Effect Latch & Switch ICs
Quick Reference
Table 1. Latch & Switch Quick Selector
Latch
Bipolar Switch
Unipolar Switch
Parameters
Omnipolar Switch
US1881
US3881
US2881/2
US2884
US4881
US5781/2
US5881
MLX90248
New Generation
MLX90248-H
High
High
Very High
Very High
Very High
Medium
Low
Very High
Very High
9.5
9
6
6
6
15
30
6
6
[mT]
-9.5
-9
-6
-6
-6
3.5
9.5
0.5
0.5
(2)
10
10
5
4
5
5
4.3
1
1
E, K, L
E, K, L
E, L
L
E, K, L
E, L / L
E, L
E
E
3.5~24
2.2~18
3.5~24
3.5~24
2.2~18
3.5~24
3.5~24
1.5~3.6
3.5~5.5
IDD average [mA]
2.5
2.5
2.5
2.5
2.5
2.5
2.5
5µA @ 3V
3µA @ 1.8V
25µA @ 5V
IOUT continuous max [mA]
20
20
20
20
20
20
20
1
1
VDSON max [V] @ IOUT
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.4
0.4
S
S
S
-
S
S/-
S
-
-
N/S
N
N&S
N&S
(1)
Sensitivity
(2)
BOP max
BRP min
(2)
[mT]
BHYST typical
[mT]
Temperature range
(3)
VDD range [V]
Open Drain output
Pole Active
for the
Package (4)
TO92 flat (UA)
TSOT (SE)
N
N
N
S
UTQFN (LD)
-
-
-
-
-
-
-
N&S
N&S
RoHS (Pb-free) Compliant
Green Compliant
Note
Note
Note
Note
1
2
3
4
N
(4)
1 mT = 10 Gauss
Temperature ranges: E (-40/85ºC), K (-40/125ºC), L (-40/150ºC)
Pole Active: magnetic pole applied to the marked side of the package which turns the Output ON (Low)
Available in SOT23 (SO) package until depletion of stock, contact Melexis for further information
For more detailed information about the device performance, please refer to the latest datasheet revision available on our website or contact our sales force.
390129021602
Rev. 003, February 2009
www.melexis.com
Page 1 of 5
Hall Effect Latch & Switch ICs
Quick Reference
Figure 1. Latch & Bipolar Switch Graph Selector by Operating Voltage and Magnetic Sensitivity
390129021602
Rev. 003, February 2009
www.melexis.com
Page 2 of 5
Hall Effect Latch & Switch ICs
Quick Reference
Figure 2. Unipolar & Omnipolar Switch Graph Selector by Operating Voltage and Magnetic Sensitivity
390129021602
Rev. 003, February 2009
www.melexis.com
Page 3 of 5
Hall Effect Latch & Switch ICs
Quick Reference
Table 2. Package pictures
Through-Hole Package Surface Mount Package
TO92-3L flat (UA)
390129021602
Rev. 003, February 2009
TSOT-3L (SE)
www.melexis.com
Page 4 of 5
Chip Size Package
UTQFN-6L (LD)
Hall Effect Latch & Switch ICs
Quick Reference
Disclaimer
1)
The information included in this documentation is subject to Melexis intellectual and other property rights. Reproduction of information is permissible only if the information will
not be altered and is accompanied by all associated conditions, limitations and notices.
2)
Any use of the documentation without the prior written consent of Melexis other than the one set forth in clause 1 is an unfair and deceptive business practice. Melexis is not
responsible or liable for such altered documentation.
3)
The information furnished by Melexis in this documentation is provided ’as is’. Except as expressly warranted in any other applicable license agreement, Melexis disclaims all
warranties either express, implied, statutory or otherwise including but not limited to the merchantability, fitness for a particular purpose, title and non-infringement with
regard to the content of this documentation.
4)
Notwithstanding the fact that Melexis endeavors to take care of the concept and content of this documentation, it may include technical or factual inaccuracies or typographical
errors. Melexis disclaims any responsibility in connection herewith.
5)
Melexis reserves the right to change the documentation, the specifications and prices at any time and without notice. Therefore, prior to designing this product into a system,
it is necessary to check with Melexis for current information.
6)
Melexis shall not be liable to recipient or any third party for any damages, including but not limited to personal injury, property damage, loss of profits, loss of use, interrupt of
business or indirect, special incidental or consequential damages, of any kind, in connection with or arising out of the furnishing, performance or use of the information in this
documentation.
7)
The product described in this documentation is intended for use in normal commercial applications. Applications requiring operation beyond ranges specified in this
documentation, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment are specifically not
recommended without additional processing by Melexis for each application.
8)
Any supply of products by Melexis will be governed by the Melexis Terms of Sale, published on www.melexis.com.
© Melexis NV. All rights reserved.
For the latest version of this document, go to our website at
www.melexis.com
or for additional information contact Melexis Direct:
Europe, Africa:
Phone: +32 1367 0495
E-mail: [email protected]
USA:
Phone: +1 603 223 2362
E-mail: [email protected]
ISO/TS 16949 and ISO14001 Certified
390129021602
Rev. 003, February 2009
www.melexis.com
Page 5 of 5
Asia:
Phone: +32 1367 0495
Email: [email protected]