PIC12(L)F1501/PIC16(L)F150X 8/14/20-Pin, 8-Bit Flash Microcontrollers Product Brief High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Up to 14 Kbytes Linear Program Memory Addressing • Up to 512 bytes Linear Data Memory Addressing • Operating Speed: - DC – 20 MHz clock input - DC – 125 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ±1%, typical - Software selectable frequency range from 16 MHz to 31 kHz • 31 kHz Low-Power Internal Oscillator • Three External Clock modes up to 20 MHz Special Microcontroller Features: • Operating Voltage Range: - 1.8V to 3.6V (PIC12LF1501/PIC16LF150X) - 2.3V to 5.5V (PIC12F1501/PIC16F150X) • Self-Programmable under Software Control • Power-on Reset (POR) • Power-up Timer (PWRT) • Programmable Low-Power Brown-Out Reset (LPBOR) • Extended Watchdog Timer (WDT): - Programmable period from 1 ms to 256s • Programmable Code Protection • In-Circuit Serial Programming™ (ICSP™) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Power-Saving Sleep mode: - Low-Power Sleep mode - Low-Power BOR (LPBOR) • Integrated Temperature Indicator 2011 Microchip Technology Inc. Low-Power Features (PIC12LF1501/PIC16LF150X): • Standby Current: - 20 nA @ 1.8V, typical • Watchdog Timer Current: - 300 nA @ 1.8V, typical • Operating Current: - 30 A/MHz @ 1.8V, typical • Timer1 Oscillator: - 600 nA @ 32 kHz, 1.8V, typical (PIC16LF1508/09 devices only) Peripheral Features: • Analog-to-Digital Converter (ADC): - 10-bit resolution - Up to 12 external channels - 2 internal channels: - Fixed Voltage Reference channel - Temperature Indicator channel - Auto acquisition capability - Conversion available during Sleep • Up to 2 Comparators: - Rail-to-rail inputs - Power mode control - Software controllable hysteresis • Voltage Reference module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels - Up to 1 rail-to-rail resistive 5-bit DAC with positive and negative reference selection • Up to 17 I/O Pins and 1 Input-only Pin: - High current sink/source 25 mA/25 mA - Individually programmable weak pull-ups - Individually programmable interrupt-onchange (IOC) pins • Timer0: 8-Bit Timer/Counter with 8-Bit Programmable Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Four 10-bit PWM modules • Up to 1 Master Synchronous Serial Port (MSSP) with SPI and I2C™ with: - 7-bit address masking - SMBus/PMBus™ compatibility • Up to 1 Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART): - RS-232, RS-485 and LIN compatible Advance Information DS41454C-page 1 PIC12(L)F1501/PIC16(L)F150X - Auto-baud detect - Auto-wake-up on Start • Up to 4 Configurable Logic Cell (CLC) modules: - Up to 16 selectable input source signals - Four inputs per module - Software control of combinational/sequential logic/state/clock functions - AND/OR/XOR/D Flop/D Latch/SR/JK - External or internal inputs/outputs - Operation while in Sleep • Numerically Controlled Oscillator (NCO): - 20-bit accumulator - 16-bit increment - True linear frequency control - High-speed clock input - Selectable Output modes - Fixed Duty Cycle (FDC) - Pulse Frequency Modulation (PFM) TABLE 1: • Complementary Waveform Generator (CWG): - Up to 8 selectable signal sources - Selectable falling and rising edge dead-band control - Polarity control - Up to 4 auto-shutdown sources - Multiple input sources: PWM, CLC, NCO PIC12(L)F1501/PIC16(L)F150X FAMILY TYPES Program SRAM 10-bit A/D Timers I/Os Comparators DAC PWM EUSART MSSP CWG CLC NCO ICD XLP Memory Flash (bytes) (ch) 8/16-bit (words) Device PIC12F1501 PIC12LF1501 1024 64 6 4 1 1 2/1 4 — — 1 2 1 — — PIC16F1503 PIC16LF1503 2048 128 12 8 2 1 2/1 4 — 1 1 2 1 — — PIC16F1507 PIC16LF1507 2048 128 18 12 — — 2/1 4 — — 1 2 1 — — PIC16F1508 PIC16LF1508 4096 256 18 12 2 1 2/1 4 1 1 1 4 1 V3 X PIC16F1509 PIC16LF1509 8192 512 18 12 2 1 2/1 4 1 1 1 4 1 V3 X Note: Pin details are subject to change. FIGURE 1: 8-PIN PDIP, SOIC, MSOP, DFN DIAGRAM FOR PIC12(L)F1501 VDD 1 RA5 2 RA4 3 MCLR/VPP/RA3 4 PIC12(L)F1501 PDIP, SOIC, MSOP, DFN (2X3) 8 VSS 7 RA0/ICSPDAT 6 RA1/ICSPCLK 5 RA2 Note: See Table 2 for location of all peripheral functions. DS41454C-page 2 Advance Information 2011 Microchip Technology Inc. PIC12(L)F1501/PIC16(L)F150X FIGURE 2: 14-PIN PDIP, SOIC, TSSOP DIAGRAM FOR PIC16(L)F1503 PDIP, SOIC, TSSOP 1 14 RA5 RA4 2 13 VSS RA0/ICSPDAT 12 RA1/ICSPCLK 11 RA2 10 RC0 9 RC1 8 RC2 MCLR/VPP/RA3 3 4 RC5 5 RC4 6 RC3 7 PIC16(L)F1503 VDD Note: See Table 3 for location of all peripheral functions. FIGURE 3: 16-PIN QFN DIAGRAM FOR PIC16(L)F1503 VDD NC NC Vss QFN (3x3) RA5 RA4 MCLR/VPP/RA3 RC5 1 2 3 4 PIC16(L)F1503 16 15 14 13 12 11 10 9 - RA0/ICSPDAT RA1/ICSPCLK RA2 RC0 RC4 RC3 RC2 RC1 5 6 7 8 Note: See Table 3 for location of all peripheral functions. 2011 Microchip Technology Inc. Advance Information DS41454C-page 3 PIC12(L)F1501/PIC16(L)F150X FIGURE 4: 20-PIN PDIP, SOIC, SSOP DIAGRAM FOR PIC16(L)F1507/8/9 PDIP, SOIC, SSOP 1 20 2 19 VSS RA0/ICSPDAT 3 4 18 RA1/ICSPCLK MCLR/VPP/RA3 PIC16(L)F1507/8/9 VDD RA5 RA4 17 RA2 16 RC0 15 RC1 14 RC2 13 RB4 9 12 RB5 10 11 RB6 RC5 5 RC4 6 RC3 RC6 7 RC7 RB7 8 Note 1: See Table 4 for location of all PIC16(L)F1507 peripheral functions. 2: See Table 5 for location of all PIC16(L)F1508/9 peripheral functions 20-PIN QFN DIAGRAM FOR PIC16(L)F1507/8/9 RA4 RA5 VDD Vss RA0/ICSPDAT FIGURE 5: QFN (4x4) MCLR/VPP/RA3 RC5 RC4 RC3 RC6 1 2 3 4 5 PIC16(L)F1507/8/9 20 19 18 17 16 15 14 13 12 11 - RA1/ICSPCLK RA2 RC0 RC1 RC2 RC7 RB7 RB6 RB5 RB4 6 7 8 9 10 Note 1: See Table 4 for location of all PIC16(L)F1507 peripheral functions. 2: See Table 5 for location of all PIC16(L)F1508/9 peripheral functions DS41454C-page 4 Advance Information 2011 Microchip Technology Inc. PIC12(L)F1501/PIC16(L)F150X 8-Pin PDIP/SOIC/MSOP/DFN ADC Reference Comparator Timer CWG NCO CLC PWM Interrupt Basic 8-PIN ALLOCATION TABLE (PIC12(L)F1501) I/O TABLE 2: RA0 7 AN0 DACOUT1 C1IN+ — CWGB(1) — CLC2IN1 PWM2 IOC ICSPDAT RA1 6 AN1 VREF+ C1IN0- — — NCOOUT(1) CLC2IN0 — IOC ICSPCLK RA2 5 AN2 DACOUT2 C1OUT T0CKI CWGA(1) CWGFLT — INT IOC — RA3 4 — — — T1G(2) — — IOC MCLR VPP RA4 3 AN3 — C1IN1- T1G(1) CWGB(2) — IOC CLKOUT NCOCLK NCOOUT(2) CLC2OUT CLC1IN1 PWM4 IOC CLKIN CLC1OUT(1) PWM1 CLC1IN0 — CLC1OUT(2) PWM3 RA5 2 — — — T1CKI CWGA(2) VDD 1 — — — — — — — — — VDD VSS 8 — — — — — — — — — VSS Note 1: Default location for peripheral pin function. Alternate location can be selected using the APFCON register. 2: Alternate location for peripheral pin function selected by the APFCON register. 16-Pin QFN ADC Reference Comparator Timer CWG NCO CLC PWM MSSP Interrupt RA0 13 12 AN0 DACOUT1 C1IN+ — — — — — — IOC ICSPDAT RA1 12 11 AN1 VREF+ C1IN0C2IN0- — — — — — — IOC ICSPCLK RA2 11 10 AN2 DACOUT2 C1OUT T0CKI CWGFLT — CLC1OUT(1) PWM3 — INT IOC — RA3 4 3 — — — T1G(2) — — CLC1IN0 — SS(2) IOC MCLR VPP RA4 3 2 AN3 — — T1G(1) — NCOOUT(2) — — SDO(2) IOC CLKOUT RA5 2 1 — — — T1CKI — NCOCLK CLC1IN1 — — IOC CLKIN RC0 10 9 AN4 — C2IN+ — — — CLC2OUT — SCL SCK — — RC1 9 8 AN5 — C1IN1C2IN1- — — NCOOUT(1) — PWM4 SDA SDI — — RC2 8 7 AN6 — C1IN2C2IN2- — — — — — SDO(1) — — RC3 7 6 AN7 — C1IN3C2IN3- — — — CLC2IN0 PWM2 SS(1) — — RC4 6 5 — — C2OUT — CWGB — CLC2IN1 — — — — RC5 5 4 — — — — CWGA — CLC1OUT(2) PWM1 — — — VDD 1 16 — — — — — — — — — — VDD VSS 14 13 — — — — — — — — — — VSS Note 1: 2: Basic 14-Pin PDIP/SOIC/TSSOP 14-PIN ALLOCATION TABLE (PIC16(L)F1503) I/O TABLE 3: Default location for peripheral pin function. Alternate location can be selected using the APFCON register. Alternate location for peripheral pin function selected by the APFCON register. 2011 Microchip Technology Inc. Advance Information DS41454C-page 5 PIC12(L)F1501/PIC16(L)F150X 20-Pin QFN ADC Reference Timer CWG NCO CLC PWM Interrupt RA0 19 16 AN0 — — — — — — IOC ICSPDAT RA1 18 15 AN1 VREF+ — — — — — IOC ICSPCLK RA2 17 14 AN2 — T0CKI CWGFLT — CLC1OUT(1) PWM3 INT IOC — RA3 4 1 — — — — — CLC1IN0 — IOC MCLR VPP RA4 3 20 AN3 — T1G — — — — IOC CLKOUT RA5 2 19 — — T1CKI — NCOCLK — — IOC CLKIN RB4 13 10 AN10 — — — — — — IOC — RB5 12 9 AN11 — — — — — — IOC — RB6 11 8 — — — — — — — IOC — RB7 10 7 — — — — — — — IOC — RC0 16 13 AN4 — — — — CLC2OUT — — — RC1 15 12 AN5 — — — NCOOUT(1) — PWM4 — — RC2 14 11 AN6 — — — — — — — — RC3 7 4 AN7 — — — — CLC2IN0 PWM2 — — RC4 6 3 — — — CWGB — CLC2IN1 — — — RC5 5 2 — — — CWGA — CLC1OUT(2) PWM1 — — RC6 8 5 AN8 — — — NCOOUT(2) — — — — RC7 9 6 AN9 — — — CLC1IN1 — — — Basic 20-Pin PDIP/SOIC/SSOP 20-PIN ALLOCATION TABLE (PIC16(L)F1507) I/O TABLE 4: VDD 1 18 — — — — — — — — VDD VSS 20 17 — — — — — — — — VSS Note 1: Default location for peripheral pin function. Alternate location can be selected using the APFCON register. 2: Alternate location for peripheral pin function selected by the APFCON register. DS41454C-page 6 Advance Information 2011 Microchip Technology Inc. PIC12(L)F1501/PIC16(L)F150X 20-Pin QFN ADC Reference Comparator Timer CWG NCO CLC PWM EUSART MSSP Interrupt RA0 19 16 AN0 DACOUT1 C1IN+ — — — — — — — IOC ICSPDAT ICDDAT RA1 18 15 AN1 VREF+ C1IN0C2IN0- — — — CLC4IN1 — — — IOC ICSPCLK ICDCLK RA2 17 14 AN2 DACOUT2 C1OUT T0CKI CWGFLT — — — INT IOC — RA3 4 1 — — — T1G(2) — — CLC1IN0 — — SS(2) IOC MCLR VPP RA4 3 20 AN3 — — T1OSCO T1G(1) — — — — — — IOC OSC2 CLKOUT RA5 2 19 — — — T1OSCI T1CKI — NCOCLK — — — — IOC OSC1 CLKIN RB4 13 10 AN10 — — — — — CLC3IN0 — — SDA SDI IOC — RB5 12 9 AN11 — — — — — CLC4IN0 — RX DX — IOC — RB6 11 8 — — — — — — — — — SCL SCK IOC — RB7 10 7 — — — — — — CLC3OUT — TX CK — IOC — RC0 16 13 AN4 — C2IN+ — — — CLC2OUT — — — — — RC1 15 12 AN5 — C1IN1C2IN1- — — NCOOUT(1) — PWM4 — — — — RC2 14 11 AN6 — C1IN2C2IN2- — — — — — — — — — RC3 7 4 AN7 — C1IN3C2IN3- — — — CLC2IN0 PWM2 — — — — RC4 6 3 — — C2OUT — CWGB — CLC4OUT CLC2IN1 — — — — — RC5 5 2 — — — — CWGA — — — — — RC6 8 5 AN8 — — — — NCOOUT(2) CLC3IN1 — — SS(1) — — RC7 9 6 AN9 — — — — — CLC1IN1 — — SDO — — VDD 1 18 — — — — — — — — — — — VDD VSS 20 17 — — — — — — — — — — — VSS Note 1: 2: CLC1OUT(1) PWM3 CLC1OUT(2) PWM1 Basic 20-Pin PDIP/SOIC/SSOP 20-PIN ALLOCATION TABLE (PIC16(L)F1508/9) I/O TABLE 5: Default location for peripheral pin function. Alternate location can be selected using the APFCON register. Alternate location for peripheral pin function selected by the APFCON register. 2011 Microchip Technology Inc. Advance Information DS41454C-page 7 PIC12(L)F1501/PIC16(L)F150X NOTES: DS41454C-page 8 Advance Information 2011 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2011, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 978-1-61341-392-0 Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. 2011 Microchip Technology Inc. Advance Information DS41454C-page 9 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Hangzhou Tel: 86-571-2819-3180 Fax: 86-571-2819-3189 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Taiwan - Hsin Chu Tel: 886-3-6578-300 Fax: 886-3-6578-370 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Taiwan - Kaohsiung Tel: 886-7-213-7830 Fax: 886-7-330-9305 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 DS41454C-page 10 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Advance Information 05/02/11 2011 Microchip Technology Inc.