V-BITE® BNC Connectors 50 Ohm & 75 Ohm Edge-Mount PCB Product Description V-Bite® Edge-Mount BNC PCB Connectors feature a unique and patented design which provides ease of assembly, outstanding RF performance, and superior mechanical strain relief. V-Bite® Edge-Mount BNC connectors are available in 50 Ohm and 75 Ohm and can be used in a wide range of applications including Broadcast Routers, Medical Equipment, Security, Telecommunications, and Test and Measurement. V-Bite® Edge-Mount BNC PCB connectors snap into the printed circuit board and are held securely in position prior to soldering. Connector bodies are notched where they attach to the board, which helps to provide excellent strain relief and prevent fatigue to the solder joints during connector mating and unmating. The edge-mount design utilizes a straight SMT contact for the RF signal that yields optimal performance versus a right-angle through-hole PCB connector. • V-Bite® Edge-Mount connectors feature a semi-circle shaped spring contact staked into a groove at the rear of the connector. • V-Bite® Edge-Mount connectors are fast and simple to install. Simply place the connector at a 45-degree angle to the PCB. Insert the PCB into the notched opening and push down onto the connector to seat it firmly in place. • Once installed, V-Bite® EdgeMount connectors are ready to be soldered and do not require special fixtures to hold the connectors in true position. CONNECTING INNOVATION TO APPLICATION® Specifications Electrical Material Impedance: Frequency Range: Working Voltage: Dielectric Withstanding Voltage: VSWR: 50 Ohm or 75 Ohm 0 - 4 GHz ≥ 500 VRMS Body & Outer Contact: Female Contact: Insulation Resistance: Insertion Loss: 1500 VRMS at sea level Straight: 1.15 Max Right Angle: 1.2 Max Center Contact: ≤ 1.5 Milliohms Outer Contact: ≤ 0.2 Milliohms 5000 Milliohms 0.2 dB Max Environmental Temperature Range: - 65˚ C to + 165˚ C Contact Resistance: Insulator: Brass Nickel Plated / Gold Phosphor Bronze, Gold Plated Polyethylene or PTFE Mechanical Center Contact Retention: Engagement Force: Disengagement Force: Durability: ≥ 6 lbs. ≤ 5 lbs. ≥ 1.5 lbs. 500 Cycles Min Part Numbers Part Number Description Impedance PCB Thickness Mounting Hardware 361V504ER BNC Jack 50 Ohm 0.062 inch 361V504ET BNC Jack, Threaded Body 50 Ohm 0.062 inch Sold Separately* 361V504EFT BNC Jack, Bulkhead 50 Ohm 0.062 inch Sold Separately* 361V704ER BNC Jack 75 Ohm 0.062 inch 361V704ET BNC Jack, Threaded Body 75 Ohm 0.062 inch Sold Separately* 361V704EFT BNC Jack, Bulkhead 75 Ohm 0.062 inch Sold Separately* 361V704EFTW BNC Jack, Bulkhead with Gasket 75 Ohm 0.062 inch Included *Mounting Hardware Lockwasher: 364LW Spanner Nut: 361KNT Hex Nut: 364NT Winchester Electronics 199 Park Road Extension, Suite 104 Middlebury, Connecticut 06762 203.741.5400 Phone 203.741.5500 Fax www.winchesterelectronics.com December 2013