V-BITE® Type F Connectors Type F Edge-Mount PCB Product Description V-Bite® Edge-Mount Type F PCB Connectors feature a unique and patented design that provides ease of assembly, outstanding RF performance, and superior mechanical strain relief. V-Bite® Edge-Mount Type F connectors can be used in a wide range of applications including Broadcast, Telecommunications, Test and Measurement, Security, and Medical equipment. V-Bite® Edge-Mount Type F PCB connectors snap into the printed circuit board and are held securely in position prior to soldering. Connector bodies are notched where they attach to the board, which helps to provide excellent strain relief and prevent fatigue to the solder joints during connector mating and unmating. The edge-mount design utilizes a straight SMT contact for the RF signal that yields optimal performance versus a right-angle through-hole PCB connector. • V-Bite® Edge-Mount connectors feature a semi-circle shaped spring contact staked into a groove at the rear of the connector. • V-Bite® Edge-Mount connectors are fast and simple to install. Simply place the connector at a 45-degree angle to the PCB. Insert the PCB into the notched opening and push down onto the connector to seat it firmly in place. • Once installed, V-Bite® EdgeMount connectors are ready to be soldered and do not require special fixtures to hold the connectors in true position. CONNECTING INNOVATION TO APPLICATION® Specifications Electrical Material Impedance: Frequency Range: Working Voltage: Dielectric Withstanding Voltage: VSWR: 75 Ohms 0 – 1 GHz 500 VRMS at sea level Contact Resistance: Center Contact: ≤ 3 Milliohms Insulation Resistance: 5000 Meg Ohms Min Environmental Temperature Range: - 40˚ C to + 65˚ C 1000 VRMS at sea level Straight: 1.5 Max Body Female Contact: Insulator: Brass Nickel Plated Phosphor Bronze / BECU Gold / Tin Plated PTFE Mechanical Shock Coupling Mating Torque: Durability: 30 G 15-20 in-lbs. 500 Cycles Min Part Numbers Part Number Description PCB Contact Type PCB Thickness Frequency Range 861V509E F Jack, Edge-Mount Tab 0.062 inch 0-1 GHz 861V509ER F Jack, Edge-Mount Round Pin with Flat 0.062 inch 0-1 GHz 861V509ER6 F Jack, Edge-Mount Round Pin 0.062 inch 0-3 GHz 861VUS509ER6093 F Jack, Edge-Mount, Undershield Round Pin 0.062 inch 0-1 GHz 861VH509ER6 F Jack, Edge-Mount Round Pin 0.093 inch 0-5 GHz Mounting Hardware: Lockwasher: 864LW Hex Nut: 864NT Winchester Electronics 199 Park Road Extension, Suite 104 Middlebury, Connecticut 06762 203.741.5400 Phone 203.741.5500 Fax www.winchesterelectronics.com December 2013