DESCRIPTION G REVISED PER ECR-ER36094 BY APPD DATE 2. MATERIAL SPECIFICATIONS: BODY & CENTER CONTACT: BRASS PER ASTM B16. OUTER CONTACT & FERRULE: COPPER ALLOY. INSULATOR: TEFLON PER ASTM D1710. 3. FINISH SPECIFICATIONS: BODY & FERRULE: .000100 MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (RoHS). CONTACT: .000030 MIN GOLD PER ASTM B488 OVER .000080 MIN NICKEL PER AMS-QQ-N-290 (RoHS). P/N 0345-E00-V3601N 0345-E00-V3601NU 4. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS. FREQUENCY RANGE: DC-6.0 GHz. RETURN LOSS: <-20dB UP TO 3.0 GHz, <-15dB UP TO 6.0 GHz. DESCRIPTION SINGLE PACK BULK PACK L.L REV CY 11/30/11 NOTES: UNLESS OTHERWISE SPECIFIED 1. DESIGNED FOR USE WITH ARGOSY IMAGE 360 & BELDEN 1855ENH CABLE OR EQUIVALENT. QTY 1 400 5. COMPLIANT TO SMPTE 424M (3G-SDI) STANDARD. 6. CONTACT AND FERRULE SHIPPED LOOSE. 7. INTERFACE PER CECC 22230. 8. CRIMP FERRULE (.213 HEX) AND CONTACT (.042 HEX) USE KINGS KTH-2113. 9. CAP-E03. .245 6.22 .206 5.23 .315 8.00 .032 .81 .500 12.70 .128 3.25 1.29 [32.8] WHEN ASSEMBLED .625 15.88 CATALOG P/N: 0345-E00-V3601N .327 8.31 .150 3.81 RECOMMENDED CABLE TRIM DIMENSIONS DMF026 B PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2:1 THIRD ANGLE Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 CUSTOMER SALES DRAWING DRAWN DW APPROVED WPM DATE APPROVED 06/16/09 Dcam DATE APPROVED 09/16/09 XXX DATE 09/16/09 DATE XX/XX/XX DIN 1.0/2.3 75 OHM PLUG FOR ARGOSY IMAGE 360 CABLE (RoHS COMPLIANT) A SD0345-E00-V3601N SHT 1 OF 1 REV G