3mm Advanced Super Flux LEDs 33-01-C44-RRFC-D1T1U1CH-AM Lead (Pb) Free Product - RoHS Compliant Feature Lead-Free RoHS compliant. Low profile. Uniform color High flux output Colorless clear resin. Brightness: 7150 to 14250 mlm at 70mA. Qualification according to AEC-Q101. Packaged in tubes for use with automatic insertion equipment. Compliance with EU REACH. Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm). Applications Automotive lighting Electronic Signs and Signals. Special Lighting application Device Selection Guide LED Part No. 33-01-C44-RRFC-D1T1U1CH-AM 1 Revision Chip Material AlGaInP Emitted Color Resin Color Red Water Clear Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11. 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Table of Content Page Product Nomenclature 3 Absolute Maximum Ratings (Ta=25℃) 4 Electro-Optical Characteristics (Ta=25℃) 5 Bin Range of Dominant Wavelength (Ta=25℃) 6 Bin Range of Forward Voltage (Ta=25℃) 7 Bin Range of Total Flux (Ta=25℃) 8 Typical Electro-Optical Characteristics Curves 9 Package Dimensions 11 Inner and Outer Label Explanation 12 Antistatic Packing Materials Tube and Standard Boxes 13 Precautions 14 Revision History 18 2 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Product Nomenclature 33 - 1 01 - 2 C5 4 3 4 - RRF C 5 6 - D1 T1U1 C H 7 8 9 10 - AM 11 The product name is designated as below: 3 Revision 1. Product type 2. Lead-frame type 3 Angle 4. Product pasted without Zener 5 Chip code 6. Resin color 7. Wavelength 8. Power &Total Flux 9. Range of Forward Voltage specification 10. Operation current 11 Application Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Absolute Maximum Ratings (Ta=25℃) Parameter Symbol Rating Reverse Voltage VR 5 V Continuous Forward Current IF 70 mA Power Dissipation Pd 220 mW LED Junction Temperature Tj 115 ℃ Operating Temperature Topr -40 ~ +100 ℃ Storage Temperature Tstg -40 ~ +110 ℃ Electrostatic Discharge ESD 2000 V Soldering Temperature Tsol Wave Soldering : 260 ℃ for 5 sec Hand Soldering : 300 ℃ for 3 sec 4 Revision Unit Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Electro-Optical Characteristics (Ta=25℃) Parameter Symbol Min. Typ. Total Flux ΦV 7150 Peak Wavelength λp ----- λd 620 ----- Δλ ----- 18 Viewing Angle 2θ1/2 ----- Forward Voltage VF Reverse Current IR Dominant Wavelength Spectrum Radiation Bandwidth ----- Max. 14250 Unit Condition mlm IF =70mA nm IF =70mA nm IF =70mA ----- nm IF =70mA 115 ----- deg IF =70mA 1.9 ----- 2.9 V IF =70mA ----- ----- 10 μA VR =10V 631 ----628 Note: 1. Tolerance of Total Flux: ±11% 2. Tolerance of Dominant Wavelength: ±1nm 3. Tolerance of Forward Voltage: ±0.1V 5 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Bin Range of Dominant Wavelength (Ta=25℃) Bin Min. Max. 2 620 624 3 624 628 Unit Condition nm IF =70mA Note: Tolerance of Dominant Wavelength: ±1nm 6 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Bin Range of Forward Voltage (Ta=25℃) Bin Min. Max. 2 1.9 2.1 3 2.1 2.3 4 2.3 2.5 5 2.5 2.7 6 2.7 2.9 Unit Condition V IF =70mA Note: Tolerance of Forward Voltage: ±0.1V 7 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Bin Range of Total Flux (Ta=25℃) Bin Min. Max. T1 7150 9000 T2 9000 11250 U1 11250 14250 Unit Condition mlm IF =70mA Note: Tolerance of Total Flux: ±11% 8 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Typical Electro-Optical Characteristics Curves Typical Curve of Spectral Distribution Relative Intensity(％) 100 50 0 500 550 600 650 700 750 Wavelength(nm) Diagram Characteristics of Radiation 0 1 .0 0 10 0 20 0 30 40 0 .8 Relative Intensity 0 0 50 0 .6 0 60 0 .4 70 0 .2 0 .0 0 -9 0 0 0 80 -7 0 0 -5 0 0 -3 0 0 0 90 -1 0 0 0 View Angle(degree) 9 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Forward Current vs. Forward Voltage (Ta=25℃) Dominant Wavelength vs. Forward Current (Ta=25℃) 90 625 80 624 Dominant Wavelength (nm) Forward Current (mA) 100 70 60 50 40 30 20 10 0 1.7 1.9 2.1 2.3 2.5 623 622 621 620 619 618 0 2.7 10 Forward Voltage (V) Relative Luminous Intensity vs. Forward Current (Ta=25℃) Max. Permissible Forward Current vs. Ambient Temperature Forward Current (mA) 0.9 0.6 0.3 0.0 10 20 30 40 50 60 70 80 90 100 Forward Current (mA) MAXMUM DC CURRENT(mA) Relative Luminous Intensity 70 1.2 60 50 40 30 20 10 0 0 20 40 60 80 100 120 140 AMBIENT TEMPERATURE (C) Ambient Temperature (℃) Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: 70 80 90 100 80 0 Revision 40 50 60 Forward Current (mA) 1.5 10 20 30 www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Package Dimension Note: Tolerances unless mentioned ±0.25mm. Unit = mm 11 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Inner and Outer Label Explanation ‧CPN: Customer’s Product Number Outer Label Explanation ‧P/N: Product Number ‧QTY: Packing Quantity ‧CAT: Rank of (VF)(Note*)(ΦV) ‧NOTE: λd/CIE/Color temperature ‧HUE/REF: Reference ‧LOT No: Lot Number ‧P/N: Product Number Inner Label Explanation ‧QTY: Packing Quantity PART NO: CAT: ‧CAT: Rank of (VF)(Note*)(ΦV) LOT NO: QTY: ‧NOTE: λd/CIE/Color temperature ‧LOT No: Lot Number 12 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Antistatic Packing Materials Tube Materials Tube Note: 1. Tolerances unless mentioned ±2.0mm. 2. Unit = mm Standard Boxes Note: 1. Tolerances unless mentioned ±3.0mm. 2. Unit = mm 13 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Precautions for use 1. Lead Forming During lead formation, the leads should be bent at a point at least 3mm from the base of the epoxy bulb. Cut the LED leadframes at room temperature. Cutting the leadframes at high temperatures may cause failure of the LEDs. When mounting the LEDs onto a PCB, the PCB holes must be aligned exactly with the lead position of the LED. If the LEDs are mounted with stress at the leads, it causes deterioration of the epoxy resin and this will degrade the LEDs. Lead forming should be done before soldering. Avoid stressing the LED package during leads forming. The stress to the base may damage the LED’s characteristics or it may break the LEDs. 2. Storage The LEDs should be stored at 30°C or less and 60%RH or less after being shipped from Everlight and the storage life limits are 3 months. If the LEDs are stored for 3 months or more, they can be stored for a year in a sealed container with a nitrogen atmosphere and moisture absorbent material. Please avoid rapid transitions in ambient temperature, especially, in high humidity environments where condensation can occur. 3. Soldering Careful attention should be paid during soldering. Solder the LED no lower than 1.6mm from the base of stopper is recommended. Avoiding applying any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Recommended soldering conditions: Hand Soldering DIP Soldering Temp. at tip of iron 300℃ Max. (30W Max.) Preheat temp. 100℃ Max. (60 sec Max.) Soldering time 3 sec Max. Bath temp. 260 Max. Distance No Bath time. 5 sec Max. Distance No lower than 1.6mm from lower than 1.6mm from the base of stopper the base of stopper 14 Revision Recommended soldering profile Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM To avoid any stress to the lead frame while the LEDs are at high temperature particularly when soldering. Dip or hand soldering should not be done more than one time. Cooling rapidly is not recommended after cold down from peak temperature. The len of LEDs should be protected from mechanical shock or vibration until temperature after soldering. return to room Dipping parameters must be set and maintain according to recommended range. 4. Cleaning Cleaning with isopropyl alcohol should not more than one minute and dry it in room temperature. Ultrasonic cleaning is prohibited which may damage the LEDs. 5. Thermal Management Sufficient thermal management must be implemented. Otherwise, the junction temperature of the die might be over the limit at high current driving condition and LEDs’lifetime might be decreases dramatically. 6. ESD (Electrostatic Discharge) The products are sensitive to static electricity or surge voltage. ESD can damage a die and its reliability. When handling the products, the following measures against electrostatic discharge are strongly recommended: Eliminating the charge Grounded wrist strap, ESD footwear, clothes, and floors Grounded workstation equipment and tools ESD table/shelf mat made of conductive materials Proper grounding is required for all devices, equipment, and machinery used in product assembly. Surge protection should be considered when designing of commercial products. 15 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM If tools or equipment contain insulating materials such as glass or plastic, the following measures against electrostatic discharge are strongly recommended: Dissipating static charge with conductive materials Preventing charge generation with moisture Neutralizing the charge with ionizers 7. Directions for use The LEDs should be operated with forward bias. The driving circuit must be designed so that the LEDs are not subjected to forward or reverse voltage while it is off. If reverse voltage is continuously applied to the LEDs, it may cause migration resulting in LED damage 8. Other EVERLIGHT assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. These specification sheets include all the contents are protected under copyright of EVERLIGHT Corporation. Please don’t reproduce or cause anyone to reproduce without EVERLIGHT’s permission 16 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Application Restrictions High reliability applications such as military/aerospace, automotive safety/security systems,and medical equipment may require different product. If you have any concerns, please contact Everlight before using this product in your application. This specification guarantees the quality and performance of the product as an individual component. Do not use this product beyond the specification described in this document. 17 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever DATASHEET P-LED 33-01-C44-RRFC-D1T1U1CH-AM Revision History Rev. Modified date File modified contents 1 2009/9/1 New Spec. 2 2013/5/24 Chang to the form of datasheet 3 2014/2/25 Chang the size of the packaging carton 4 2014/7/11 Change the packing specification 18 Revision Copyright © 2010, Everlight All Rights Reserved. Release Date : July.11, 2014 IssueNo DPE-0000148. Rev.4 :4 LifecyclePhase: www.everlight.com Release Date:2014-07-15 19:58:08.0 Expired Period: Forever