C-Press ® 84 & 88 Series SPECIFICATIONS Telecom Delta Ribbon Connector Winchester Electronics offers you a Telecom Delta Ribbon connector with Small C-Press® 84 Series in addition to Standard C-Press® 88 Series. The small C-Press® requires a smaller hole in the PCB, thus provides for additional space for traces between contact positions. Both connector Series are available with two grid patterns. Sizes 50, 36, 24 and 14 positions are available in both plug and receptacle. A variety of latching and screw lock hardware kits are also available. INSULATORS Material: CONTACTS Material: Plating: Color: Insulation Resistance: Operating Temperature: Polyester thermoplastic glass reinforced, UL rated 94 V-O .085" x .151" grid, white .085" x .169" grid, white .085" x .160" grid, black 5,000 Megohms (min.) -55°C to +105°C Current Rating: Copper Alloy 725 Selective plating. See Plating Chart 1 amp at 70°C 3 amps at 20°C DUST COVER/INSERTION CAP Material: Polycarbonate thermoplastic UL rated 94V-O Color: Receptacle -Red Plug-Blue Recognized under the Component Program of Underwriters Laboratories Inc. File No. E136181, to Standard UL 1863 ® Winchester Electronics 62 Barnes Industrial Road North, Wallingford, CT 06492 CP / 28 Phone: (203) 741-5400 FAX: (203) 741-5500 www.winchesterelectronics.com C-Press ® 84 & 88 Series Telecom Delta Ribbon Connector OUTLINE Plug .085" x .151" Grid A B .476 Min. 12.10 C .600 Max. 15.24 Plug .310 7.87 .52 Ref. 13.2 .210 5.33 .18 4.6 Receptacle .151 3.84 .187 Dia. 4.75 D .295 7.49 .456 11.58 .020 0.51 A .085" x .169" Grid B .475 Max. 12.07 C .600 Max. 15.24 .456 11.58 .169 4.29 .187 Dia. 4.75 D Receptacle .310 7.87 .085" x .160" Grid .52 Ref. 13.2 .456 11.58 .210 5.33 .18 4.6 .020 0.51 .160 4.06 Plug .456 11.58 .160 4.06 Receptacle DIMENSIONS A Catalog No. 84 88-1114P 84 88-1214P 84 88-1114R 84 88-1214R 84 88-1124P 84 88-1224P 84 88-1124R 84 88-1224R 84 88-1136P 84 88-1236P 84 88-1136R 84 88-1236R 84 88-1150P 84 88-1250P 84 88-1150R 84 88-1250R B 1.745 1.417 (44.32) (35.99) 2.170 1.842 (55.12) (46.79) 2.680 2.352 (68.07) (59.74) 3.275 2.947 (83.19) (74.85) C 1.004 (25.50) .997 (25.32) 1.429 (36.30) 1.422 (36.12) 1.939 (49.25) 1.932 (49.07) 2.534 (64.36) 2.527 (64.19) D .510 (12.95) .935 (23.75) 1.445 (36.70) 2.040 (51.82) Winchester Electronics 62 Barnes Industrial Road North, Wallingford, CT 06492 Phone: (203) 741-5400 FAX: (203) 741-5500 www.winchesterelectronics.com CP / 29 C-Press ® 84 & 88 Series Telecom Delta Ribbon Connector BACKPANEL REQUIREMENTS Hole Pattern .085 ± .003 Typ. 2.16 ± 0.08 * Finished hole dia. for C-Press® contact .151 ± .003 3.84 ± 0.08 .085" x .151" Grid .076 ± .002 1.93 ± 0.05 Z D Z B .005 0.13 .187 Dia. 4.75 .085 ± .003 Typ. 2.16 ± 0.08 * Finished hole dia. for C-Press® contact .085" x .169" Grid .169 ± .003 4.29 ± 0.08 Z B * Finished hole dia. for C-Press® contact .085 ± .002 2.16 ± 0.05 Z D .005 0.13 .187 Dia. 4.75 .160 ± .003 4.06 ± 0.08 .085 ± .003 Typ. 2.16 ± 0.08 .085" x .160" Grid Z D ± .003 .080 ± .002 2.03 ± 0.05 0.08 B Z .005 0.13 .187 Dia. 4.75 * Hole Size & Plating - Standard C-Press®: Winchester illustrations 27311 and 27368 on page CP/4. Winchester Electronics 62 Barnes Industrial Road North, Wallingford, CT 06492 CP / 30 Phone: (203) 741-5400 FAX: (203) 741-5500 www.winchesterelectronics.com C-Press ® 84 & 88 Series Telecom Delta Ribbon Connector HARDWARE Mating Connector With Backshell Mating Connector With Bail Lock Ears Kit Cat. No. 84101 Kit Cat. No. 84104* (“A” = 19) Kit Cat. No. 84105 (“A” = .09) *Winchester Electronics Standard Spring Clip Bail Lock Spring Clip #4-40 Hardware #4-40 Hardware A C-Tel Connector C-Tel Connector P.C. Board P.C. Board Mating Connector With 90° Cable Mating Connector With Mtg. Hole Kit Cat. No. 84102 Inches: Kit Cat. No. 84103 Metric: Kit Cat. No. 84106 (This kit can only be used on connector without inserts) 90o Bail Lock Clip #4-40 Hardware #4-40 Hardware or 3 mm x .5 mm Metric Hardware #4-40 Screw Lock or 3 mm x .5 mm Screw Lock C-Tel Connector C-Tel Connector P.C. Board P.C. Board #4-40 Hardware or 3 mm x .5 mm Metric Hardware Dust Cover / Insertion Cap Inserts .320 8.13 #4-40 #4-40 Standoff ORDERING INFORMATION 84 / 88 11 / 12 ■ Step 1 ■ Step 2 ■ Step 3 Series Code: 84 = Small Grid Pattern: 11 = .085" x .151" (Plug) .085" x .169" (Recpt.) 12 = .085" x .160" (P&R) No. of Contacts: 14, 24, 36, 50 C-Press ® 88 = Standard C-Press® ■ Step 4 Insulator: P = Plug R = Receptacle A dust cover that also acts as the insertion tool comes with each connector. These caps are coded red for receptacle and blue for plug per telecommunications standards. P/R ■ Step 5 Insert: 0 = No Insert 1 = #4=40 Flush Insert 2 = #4-40 Standoff ■ Step 6 Plating: Standard D = .000030 Au selective plating over .000050 Ni on contact area. Bright solder on C-section Option C = .000030 Au selective plating over .000050 Ni on contact area. Au Flash on C-section Winchester Electronics 62 Barnes Industrial Road North, Wallingford, CT 06492 Phone: (203) 741-5400 FAX: (203) 741-5500 www.winchesterelectronics.com CP / 31 C-Press ® 184 & 188 Series Telecom Shielded Delta Ribbon Connector Winchester Electronics offers you a Shielded Telecom Delta Ribbon connector with Small C-Press® - 84 Series in addition to Standard C-Press® 88 Series. The Small C-Press® requires a smaller hole in the PCB, thus provides for additional space for traces between contact positions. Sizes 50, 36, and 24 positions are available in both plug and receptacle. These connectors meet industry standards as defined by RS232 and RS449. INSULATORS Material: Plating: SPECIFICATIONS Polyester thermoplastic glass reinforced, UL rated 94 V-O Black Color: Insulation Resistance: Operating Temperature: Current Rating: 1 amp at 70°C 3 amps at 20°C DUST COVER/INSERTION CAP: Material: Polycarbonate thermoplastic, UL rated 94 V-O Color: Receptacle -Red Plug-Blue 5,000 Megohms (min.) -55°C to +105°C CONTACTS Material: Selective plating. See Plating Chart Copper Alloy 725 Recognized under the Component Program of Underwriters Laboratories Inc. File No. E136181, to Standard UL 1863 ® OUTLINE Plug Receptacle A A B B .187 Dia. 4.75 C .475 Max. 12.07 C .605 Max. 15.37 Z D .605 Max. 15.37 .476 Min. 12.10 D .187 Dia. 4.75 Z .320 8.13 .18 4.6 .320 8.13 .53 Ref. 13.5 .53 Ref. 13.5 .456 11.58 .210 5.33 .160 4.06 .020 (0.51) Dia. .210 5.33 .18 4.6 .456 11.58 .020 (0.51) Dia. DIMENSIONS Catalog No. A B C D 184-1224P 188-1224P 2.165 1.842 1.437 .935 (54.99) (46.79) (36.50) (23.75) 184-1236P 188-1236P 2.675 2.352 1.938 1.445 (67.95) (59.74) (49.23) (36.70) 184-1250P 188-1250P 3.270 2.947 2.538 2.040 (83.06) (74.85) (64.47) (51.82) Winchester Electronics 62 Barnes Industrial Road North, Wallingford, CT 06492 CP / 32 Phone: (203) 741-5400 FAX: (203) 741-5500 www.winchesterelectronics.com .160 4.06 C-Press ® 184 & 188 Series Telecom Shielded Delta Ribbon Connector BACKPANEL REQUIREMENTS Hole Pattern * Finished hole dia. for C-Press® contact .160 ± .003 4.06 ± 0.08 .085 ± .003 Typ. 2.16 ± 0.08 .085" x .160" Grid .080 ± .002 2.03 ± 0.05 * NOTE - 184 Series finished hole .030 .035 .187 Dia. 4.75 * NOTE - 188 Series .037 .043 HOLE SIZE & PLATING See details on page CP / 4 INSERTS Inserts .187 4.75 .314 7.98 #4-40 #4-40 Standoff Dust Cover / Insertion Cap A dust cover that also acts as the insertion tool comes with each connector. These caps are coded red for receptacle and blue for plug per telecommunications standards. ORDERING INFORMATION 18 4 /188 184 ■ Step 1 Series Code: 184 = Small C-Press® ■ Step 2 Grid Pattern: 12 = .085" x .160" (P&R) ■ Step 3 No. of Contacts: 24, 36, 50 12 ■ Step 4 Insulator: P = Plug R = Receptacle 188 = Standard C-Press® P/R ■ Step 5 Insert: 0 = no insert 1 = #4-40 flush insert 2 = #4-40 standoff Note: Ground Strap Available Contact Factory Winchester Electronics 62 Barnes Industrial Road North, Wallingford, CT 06492 Phone: (203) 741-5400 FAX: (203) 741-5500 ■ Step 6 Plating: Standard D = .000030 Au selective plating over .000050 Ni on contact area. Bright solder on C-section. Option C = .000030 Au selective plating over .000050 Ni on contact area. Au flash on C-section. www.winchesterelectronics.com CP / 33