T53 www.vishay.com Vishay Sfernice 5 mm Through Hole Trimmer Single-Turn Cermet FEATURES • Fully sealed • 0.25 W at 70 °C • Wide ohmic range (10 to 1 M) • Low contact resistance variation (2 % or 3 • Small size for optimum packaging density • Suitable for both manual or automatic operation • For SMD version see TS53Y series The T53 trimming potentiometer volumetric efficiency (5 mm x 5 mm x 2.7 mm) with high performance and stability. The T53 design is suitable for both manual or automatic operation. • Tests according to CECC 41000 or IEC 60393-1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters (± 0.25 mm) 5 5.08 2.54 2.6 3 0.4 3.1 0.5 x 0.2 b 26 2.54 a 103 92 5 c Cruciform screwdriver slot Ø 2.5 width 0.5 Deep: 0.55 Max. deep (center): 0.7 Revision: 23-Sep-15 Document Number: 51014 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T53 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 220° ± 15° 10 to 1 M Resistance range Standard series Tolerance 1-2-5 Standard ± 20 % On request ± 10 % Linear 0.25 W at +70 °C 0.25 Power rating POWER IN W 0.20 0.15 0.10 0.05 0 0 20 100 120 40 60 70 AMBIENT TEMPERATURE IN °C a Circuit diagram Limiting element voltage (linear law) Contact resistance variation End resistance (typical) (3) cw See Standard Resistance Element Data table 200 V 2 % or 3 0.1 % or 3 Dielectric strength (RMS) 1000 V Insulation resistance 106 M Specification 155 c (1) b (2) Temperature coefficient 140 In accordance with CECC 41100 MECHANICAL SPECIFICATIONS Mechanical travel 270 ° ± 10° Operating torque (max. Ncm) 1.5 End stop torque (max. Ncm) 3.5 Unit weight (max. g) Terminals 0.15 Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range Climatic category Sealing Revision: 23-Sep-15 -55 °C to +155 °C 55/125/56 Enables cleaning - IP67 Document Number: 51014 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T53 www.vishay.com Vishay Sfernice PERFORMANCES TESTS Load life Moisture resistance Long term damp heat Thermal shock Rotational life (electrical and mechanical) Shock Vibration TYPICAL VALUES AND DRIFTS CONDITIONS RT/RT (%) R1-2/R1-2 (%) 1000 h at rated power 90'/30' - ambient temp. +70 °C ±2% Contact res. variation: R < 1 % Rn 3% MIL-STD 202 method 106 10 cycles of 24 h constituted with damp heat - cold - vibrations ±2% Dielectric strength: 1000 VRMS Insulation resistance. > 104 M ±3% Temperature 40 °C - RH 93 % 56 days ±2% Dielectric strength: 1000 VRMS Insulation resistance: > 104 M ±3% -55 °C to +125 °C - 5 cycles ±1% V1-2/V1-3 ± 2 % 100 cycles - rated power ± (3 % + 5 ) MIL-STD 202 method 213/1 100 g - 6 ms 3 successive shocks in 3 directions ±1% V1-2/V1-3 ± 1 % MIL-STD 202 method 204/D 20 g - 12 h ±1% V1-2/V1-3 ± 1 % Note • Nothing stated herein shall be construed as a guarantee of quality or durability. STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. WIPER CURRENT TYPICAL TCR - 55 °C + 125 °C ppm/°C W V mA 10 0.25 1.58 158 20 0.25 2.24 112 50 0.25 3.54 71 100 0.25 5.00 50 200 0.25 7.07 35 500 0.25 11.2 22 1K 0.25 15.8 16 2K 0.25 22.4 11 5K 0.25 35.4 7 10K 0.25 50.0 5 20K 0.25 70.7 3.5 50K 0.25 112 2.2 100K 0.25 158 1.6 200K 0.20 200 1.0 500K 0.08 200 0.4 1M 0.04 200 0.2 Revision: 23-Sep-15 ± 100 Document Number: 51014 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T53 www.vishay.com Vishay Sfernice MARKING • Vishay trademark • Ohmic value (in , k, M) is indicated by a three figure code, the first two are significant figures, the third one is a multiplier. Example: 100 = 10 101 = 100 102 = 1000 503 = 50 000 • Manufacturing date is indicated by four digits, the first two for the year, the last for the week number. PACKAGING • In box of 250 pieces code B41 (B0250) ORDERING INFORMATION (part number) T 5 3 Y 5 0 4 M B 4 1 Model STYLE OHMIC VALUE TOLERANCE PACKAGING T53 Y From 10 to 1 M 504 = 500 k 20 % On request: ± 10 % B41 = box 250 pieces SPECIAL NUMBER (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) T53 Y 500K 20 % MODEL STYLE VALUE TOLERANCE SPECIAL B0 e3 PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 23-Sep-15 Document Number: 51014 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000