TS3 www.vishay.com Vishay Sfernice 3 mm Square Surface Mount Miniature Trimmer Single-Turn Cermet Sealed FEATURES • 0.125 W at 70 °C • Small size for optimum packaging density • Suitable for both manual and automatic operations • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters (inches) ± 0.25 mm (± 0.010") TS3YJ 2.2 ± 0.2 (0.087 ± 0.008) 1.3 ± 0.1 (0.051 ± 0.004) 1.47 ± 0.15 (0.058 ± 0.006) 3.2 + 0.4/- 0.2 (0.126 + 0.016/- 0.008) 2 3.5 ± 0.2 (0.138 ± 0.008) 1.5 ± 0.15 (0.059 ± 0.006) 2 places 0.66 ± 0.1 (0.026 ± 0.004) 2 places 0.15 (0.006) 3 B Adjustment slot 0.52 (0.020) wide x 1.93 (0.076) long x 0.51 (0.020) deep 1 2.3 ± 0.2 (0.091 ± 0.008) RECOMMENDED SOLDERING AREAS 1.6 (0.063) 1.6 (0.063) 4.5 (0.177) 1.6 (0.063) 1.1 (0.043) 0.6 (0.024) Revision: 24-Sep-15 0.65 (0.026) 1.1 (0.043) 0.6 (0.024) Document Number: 51041 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TS3 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Electrical travel Resistance range Stocked range Standard series Tolerance standard Cermet 220° 10 to 2 M 1 k to 100 k 1-2-5 ± 20 % a Circuit diagram c (1) (3) b (2) Power rating Temperature coefficient (max.) Limiting element voltage (max.) Contact resistance variation End resistance Dielectric strength (RMS) Insulation resistance (500 VDC) cw 0.125 W at 70 °C 100 ± 150 ppm/°C/> 100 ± 100 ppm/°C 200 V 3 % or 3 1 % or 3 500 V (sea level) 100 M MECHANICAL SPECIFICATIONS Mechanical travel Operating torque (max. Ncm) End stop torque (min. Ncm) Unit weight (max. g) Mechanical life (cycles) Note • Nothing stated herein shall be construed as a guarantee of quality or durability. 250° 0.5 2 0.1 50 ENVIRONMENTAL SPECIFICATIONS Temperature range Sealing MSL level -55 °C to +125 °C Sealed container IP67 1 SOLDERING RECOMMENDATIONS Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029 STANDARD RESISTANCE ELEMENT DATA RESISTANCE 10 20 50 100 200 500 1K 2K 5K 10K 20K 50K 100K 200K 500K 1M 2M Revision: 24-Sep-15 PART MARKING CODE A1 21 51 A2 22 52 A3 23 53 A4 24 54 A5 25 55 A6 26 RESISTANCE CODE 100 200 500 101 201 501 102 202 502 103 203 503 104 204 504 105 205 Document Number: 51041 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TS3 www.vishay.com Vishay Sfernice PACKAGING Reel of 1000 pieces 5.52 ± 0.18 4 K 5 0 Ø 178 ± 2.03 4.0 ± 0.1 2.67 ± 0.2 2.0 ± 0.1 3.8 ± 0.2 1.5 ± 0.1 1.5 ± 0.2 60 ± 2.03 1.75 ± 0.1 Equal spaced 3 places 1.78 min. 12 ± 0.2 4.0 ± 0.1 2.5 ± 0.1 Ø 13 ± 0.51 0.3 ± 0.1 12.40 + 2.00 Ø 21.01 ± 0.79 ORDERING INFORMATION (part number) T S 3 Y J 5 0 3 M R 1 5 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING TS3 YJ From 10 to 2 M 503 = 50 k M = ± 20 % R15 = reel 1000 pieces SPECIAL NUMBER (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) TS3 YJ 50K 20 % MODEL STYLE VALUE TOLERANCE SPECIAL TR e3 PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 24-Sep-15 Document Number: 51041 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000