Thick Film Products (Vishay Techno)

VISHAY INTE R TECHNO L O G Y , INC .
INTERACTIVE
data book
thick film products
vishay techno
vse-db0003-0608
Notes:
1.To navigate:
a) Click on the Vishay logo on any datasheet to go to the Contents page for that section. Click on the Vishay logo on any Contents
page to go to the main Table of Contents page.
b) Click on the products within the Table of Contents to go directly
to the datasheet.
c) Use the scroll or page up/page down functions.
d) Use the Adobe ® Acrobat ® page function in the browser bar.
2.To search the text of the catalog use the Adobe ® Acrobat ® search function.
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
V I S H AY I N T E R T E C H N O L O G Y, I N C .
DATA B O O K
thick film products
vishay techno
H i g h Vo l t a g e R e s i s to r s a n d D i v i d e r s
Networks
Custom Networks
w w w. v i s h a y. c o m
SEMICONDUCTORS
RECTIFIERS
Schottky (single, dual)
Standard, Fast, and Ultra-Fast Recovery (single, dual)
Bridge
Superectifier®
Sinterglass Avalanche Diodes
SMALL-SIGNAL DIODES
Schottky and Switching (single, dual)
Tuner/Capacitance (single, dual)
Bandswitching
PIN
P rod u ct L istings
ZENER AND SUPPRESSOR DIODES
Zener (single, dual)
TVS (TransZorb®, Automotive, ESD, Arrays)
MOSFETs
Power MOSFETs
JFETs
RF TRANSISTORS
Bipolar Transistors (AF and RF)
Dual Gate MOSFETs
MOSMICs®
OPTOELECTRONICS
IR Emitters and Detectors,
and IR Receiver Modules
Optocouplers and Solid-State Relays
Optical Sensors
LEDs and 7-Segment Displays
Infrared Data Transceiver Modules
Custom Products
ICs
Power ICs
Analog Switches
DC/DC Converters
RF Transceivers
ICs for Optoelectronics
Passive Components
RESISTIVE PRODUCTS
Foil Resistors
Film Resistors
Metal Film Resistors
Thin Film Resistors
Thick Film Resistors
Metal Oxide Film Resistors
Carbon Film Resistors
Wirewound Resistors
Power Metal Strip® Resistors
Chip Fuses
Variable Resistors
Cermet Variable Resistors
Wirewound Variable Resistors
Conductive Plastic Variable Resistors
Networks/Arrays
Non-linear Resistors
NTC Thermistors
PTC Thermistors
Varistors
MAGNETICS
Inductors
Transformers
CAPACITORS
Tantalum Capacitors
Molded Chip Tantalum Capacitors
Coated Chip Tantalum Capacitors
Solid Through-Hole Tantalum Capacitors
Wet Tantalum Capacitors
Ceramic Capacitors
Multilayer Chip Capacitors
Disc Capacitors
Film Capacitors
Power Capacitors
Heavy-Current Capacitors
Aluminum Capacitors
Silicon RF Capacitors
STRAIN GAGE TRANSDUCERS
and stress analysis systems
PhotoStress®
Strain Gages
Load Cells
Force Transducers
Instruments
Weighing Systems
Vishay Techno
Thick Film Products
Vishay Techno
4051 Greystone Drive
Ontario CA 91761
USA
Phone: +1 909 923 3312
Fax: +1 909 923 6765
www.vishay.com
NOTICE
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in
Vishay's terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any
express or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to
fitness for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual
property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Table of Contents
Vishay Techno
THICK FILM PRODUCTS
Contents .....................................................................................................................................................................................................
1
Alphabetical Index ......................................................................................................................................................................................
2
RESISTORS
HIGH VOLTAGE
CRHV, High Voltage Chip Resistors ..........................................................................................................................................................
3
CDHV 2512, High Voltage Chip Divider .....................................................................................................................................................
5
TR and TD, High Voltage Resistors and Dividers ......................................................................................................................................
7
FHV, High Voltage Resistors......................................................................................................................................................................
9
DISCRETE CHIP
CR, Thick Film Chip Resistors ................................................................................................................................................................... 11
POWER
TPR, Power Resistors ................................................................................................................................................................................ 12
NETWORKS
CAPACITOR NETWORKS
TCN, Capacitor Networks........................................................................................................................................................................... 14
MCN, Capacitor Networks .......................................................................................................................................................................... 15
RESISTOR/CAPACITOR NETWORKS
TRC, Resistor/Capacitor Networks............................................................................................................................................................. 16
MRCN, Resistor/Capacitor Networks ......................................................................................................................................................... 17
LADDER NETWORKS
TxxS, R/2R Ladder Networks ..................................................................................................................................................................... 18
T16L08/T16LR8, R/2R Ladder Networks ................................................................................................................................................... 19
T14L10, R/2R Ladder Networks ................................................................................................................................................................. 20
CUSTOM NETWORKS
Custom Networks, Molded SIPS, DIPS, Coated SIPS ............................................................................................................................... 21
TSR, Surge Resistor SIP............................................................................................................................................................................ 23
Custom Networks, Surface Mount DIPS .................................................................................................................................................... 25
SMDD, SMT Precision Decade Resistor Voltage Divider........................................................................................................................... 26
Custom Networks, Quads, Surface Mount R, RC, RCD............................................................................................................................. 27
TRIMMERS
117S, 126S, 151S, 176S, Wirewound Trimmers .......................................................................................................................................... 28
12S, 14S, 15S, 17S 18S, Wirewound Trimmers ........................................................................................................................................... 30
For technical questions, contact: [email protected]
Revision: 28-Jul-06
www.vishay.com
1
Alphabetical Index
Vishay Techno
117S, 126S, 151S, 176S, Wirewound Trimmers........................................................................................................................................... 28
12S, 14S, 15S, 17S, 18S, Wirewound Trimmers........................................................................................................................................... 30
CDHV 2512, High Voltage Chip Divider......................................................................................................................................................
5
CR, Thick Film Chip Resistors .................................................................................................................................................................... 11
CRHV, High Voltage Chip Resistor.............................................................................................................................................................
3
Custom Networks, Molded SIPS, DIPS, Coated SIPS ............................................................................................................................... 21
Custom Networks, Surface Mount DIPS..................................................................................................................................................... 25
Custom Networks, Quads, Surface Mount R, RC, RCD ............................................................................................................................. 27
FHV, High Voltage Resistors ......................................................................................................................................................................
9
MCN, Capacitor Networks .......................................................................................................................................................................... 15
MRCN, Resistor/Capacitor Networks.......................................................................................................................................................... 17
SMDD, SMT Precision Decade Resistor Voltage Divider ........................................................................................................................... 26
T14L10, R/2R Ladder Networks ................................................................................................................................................................. 20
T16L08/T16LR8, R/R2 Ladder Networks.................................................................................................................................................... 19
TCN, Capacitor Networks ........................................................................................................................................................................... 14
TPR, Power Resistors................................................................................................................................................................................. 12
TR and TD, High Voltage Resistors and Dividers.......................................................................................................................................
7
TRC, Resistors/Capacitor Networks ........................................................................................................................................................... 16
TSR, Surge Resistor SIP ............................................................................................................................................................................ 23
TxxS, R/2R Ladder Networks ..................................................................................................................................................................... 18
www.vishay.com
2
For technical questions, contact: [email protected]
Revision: 28-Jul-06
CRHV
Vishay Techno
High Voltage Chip Resistors
FEATURES
• High voltage up to 3000 volts
•
•
•
•
•
•
•
•
Outstanding stability < 0.5 %
Flow solderable
Custom sizes available
Automatic placement capability
Top and wraparound terminations
Tape and reel packaging available
Internationally standardized sizes
Nickel barrier available
• Lead (Pb)-free version is RoHS compliant
MODEL
POWER
RATING
(MW)
VOLTAGE
RATING
(V) (Max.)
CRHV1206
2M - 8G
300
1500
CRHV1210
4M - 10G
450
1750
CRHV2010
6M - 35G
500
2000
CRHV2510
10M - 40G
600
2500
CRHV2512
12M - 50G
700
3000
RoHS*
COMPLIANT
MECHANICAL SPECIFICATIONS
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE
(Ω)
Available
Construction: 96 % alumina substrate with proprietary
cermet resistance element and specified termination material
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: - 55 °C to + 150 °C
Life: Less than 0.5 % change when tested at full rated power
(Reference only: Not for all values specified. Consult factory for your
size and value.)
VOLTAGE COEFFICIENT OF RESISTANCE CHART
Note
For non-standard sizes, lower values or higher power rating
requirement, contact factory at +1-909-923-3313.
ELECTRICAL SPECIFICATIONS
(Reference only: Not for all values specified. Consult factory for your
size and value.)
SIZE
VALUE
(Ohms)
VCR
(ppm/V)
CRHV1206
2M - 199M
25
CRHV1210
4M - 200M
25
6M - 99M
100M - 1G
10M - 99M
100M - 1G
12M - 999M
1G - 5G
15
20
10
15
10
25
CRHV2010
Resistance Range: 2 MΩ to 50 GΩ
Resistance Tolerance: ± 1 %, ± 2 %, ± 5 %, ± 10 %, ± 20 %
Temperature Coefficient: ± 100 ppm/°C (- 55 °C to + 150 °C)
Voltage Rating: 1500 V - 3000 V
Short Time Overload: Less than 0.5 % ΔR
CRHV2510
CRHV2512
FURTHER
INSTRUCTIONS
Values over 200M,
consult factory
Values over 200M,
consult factory
Values over 1G,
consult factory
Values over 1G,
consult factory
Values over 5G,
consult factory
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CRHV1206AF100MFKFB (preferred part number format)
C
GLOBAL
MODEL
CRHV
R
SIZE
1206
1210
2010
2510
2512
H
V
TERM
STYLE
A = 3-sided
B = top only
C = 5-sided
1
2
0
6
TERM MATERIAL
A = Palladium Silver
B = Platinum Gold
C = Gold
D = Platinum Silver
E = Platinum
Palladium Gold
F = Nickel Barrier
A
F
1
0
0
M
RESISTANCE
VALUE
TOLERANCE
TCR
M = Million
G = Billion
4M70 = 4.7 MΩ
10M0 = 10 MΩ
1G00 = 1 GΩ
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
M = ± 20.0 %
K = 100 ppm
N = 200 ppm
W = 350 ppm
P = 500 ppm
F
K
F
B
SOLDER
TERMINATION PACKAGING
F = Sn95/Ag5
N = No Solder
B = Bulk
T = Tape and
Reel
W = Waffle
Historical Part Numbering: CRHV1206AF1006F100e2 (will continue to be accepted)
CRHV
1206
A
F
1006
F
100
e2
HISTORICAL
MODEL
SIZE
TERM
STYLE
TERM
MATERIAL
RESISTANCE
VALUE
TOLERANCE
TCR
SOLDER
TERMINATION
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 68002
Revision: 21-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
3
CRHV
High Voltage Chip Resistors
Vishay Techno
DIMENSIONS in inches [millimeters]
Termination Style A
(3-sided wraparound)
Termination Style B
(Top conductor only)
W
W
L
L
T
T
0.025 [0.635]
Max.
0.025 [0.635]
Max.
Termination Style C
(5-sided wraparound)
LENGTH (L)
± 0.006 [0.152]
WIDTH (W)
± 0.006 [0.152]
THICKNESS (T)
± 0.002 [0.051]
CRHV1206
0.125
0.063
0.025
CRHV1210
0.125
0.100
0.025
CRHV2010
0.200
0.100
0.025
CRHV2510
0.250
0.100
0.025
CRHV2512
0.250
0.126
0.025
MODEL
W
L
T
0.025 [0.635]
Max.
DERATING CURVE
% OF RATED POWER
120
100
80
60
40
20
0
20
50
70
100
AMBIENT TEMP. DEG. CENTIGRADE
150
(Reference only: Not for all values specified. Consult factory for your size and value.)
www.vishay.com
4
For technical questions, contact: [email protected]
Document Number: 68002
Revision: 21-Jul-06
CDHV 2512
Vishay Techno
High Voltage Chip Divider
FEATURES
• High voltage up to 3000 volts
• Typical resistance ratios of 250:1, 500:1, etc.
Pb-free
Available
• Flow solderable
RoHS*
• Tape & Reel packaging available
COMPLIANT
• Top and Wraparound termination
• Nickel Barrier available
• Lead (Pb)-free version is RoHS compliant
ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Resistance range: 1 MΩ to 20 GΩ
Resistance tolerance: ± 1 % to ± 20 %
Power rating: See table
Voltage coefficient: See table
Temperature coefficient: See table
Ratio tracking: See table
Construction: 96 % alumina substrate with proprietary
cermet resistance element and specified termination
material
ENVIRONMENTAL SPECIFICATIONS
Operating temperature: - 55 °C to + 150 °C
Life: Less than 0.5 % change when tested at full rated power
(Reference only: Not for all values specified. Consult factory for
value.)
STANDARD ELECTRICAL SPECIFICATIONS
RESISTANCE (Ω)
POWER RATING (mW)
VOLTAGE RATING (V Max.)
20M - 20G
contact factory
3000
VOLTAGE & TEMPERATURE COEFFICIENTS OF RESISTANCE CHART TYPICAL
RESISTANCE (Ω)
RATIO (typical)
VCR (ppm/V)
TCR (ppm/°C) - 55 °C to + 150 °C
20M
250:1
5
260
150M
300:1
5
80
800M
300:1
10
50
20G
700:1
90
160
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CDHVAA20M0J2500GFB (preferred part number format)
C
GLOBAL
MODEL
D
H
TERM
STYLE
V
A
A
TERM MATERIAL
CDHV =
A = 3-sided
CDHV2512 B = top only
2
0
M
0
J
RESISTANCE TOLERANCE
VALUE (R1)
A = Palladium Silver
F = ± 1.0 %
M = Million
B = Platinum Gold
G = ± 2.0 %
G = Billion
C = Gold
20M0 = 20 MΩ H = ± 3.0 %
D = Platinum Silver 800M = 800 MΩ J = ± 5.0 %
E = Platinum
20G0 = 20 GΩ K = ± 10.0 %
Palladium Gold
M = ± 20.0 %
F = Nickel Barrier
2
5
RATIO
R1/R2
0
0
G
F
B
RATIO
SOLDER
PACKAGING
TOLERANCE TERMINATION
3 digit
significant
figure, followed
by a multiplier
2500 = 250:1
3000 = 300:1
7000 = 700:1
F = ± 1.0 %
G = ± 2.0 %
H = ± 3.0 %
J = ± 5.0 %
F = Sn95/Ag5
N = No Solder
B = Bulk
T = Tape and
Reel
W = Waffle
Historical Part Numbering: CDHV2512AA2005J2500Ge2 (will continue to be accepted)
CDHV2512
A
A
2005
J
2500
G
e2
HISTORICAL
MODEL
TERM
STYLE
TERM
MATERIAL
RESISTANCE
VALUE (R1)
TOLERANCE
RATIO
R1/R2
RATIO
TOLERANCE
SOLDER
TERMINATION
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 68020
Revision: 24-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
5
CDHV 2512
High Voltage Chip Divider
Vishay Techno
RATIO TRACKING (ppm/°C)
RESISTANCE (Ω)
RATIO (typical)
COLD (+ 25 °C to - 50 °C)
HOT (+ 25 °C to + 150 °C)
20M
250:1
5
260
150M
300:1
5
80
800M
300:1
10
50
20G
700:1
90
160
Note: Contact factory for other ratios
DIMENSIONS in inches [millimeters]
B
B
L
A
A
C
C
T
T
W
B
A
Style A
B
W
Style B
B
A
C
A
E
W
Style A Bottom
(3-sided wraparound)
TERMINATION
LENGTH (L)
± 0.006 [0.152]
WIDTH (W)
± 0.006 [0.152]
THICKNESS (T)
± 0.002 [0.051]
A ± 0.005
B ± 0.005
C ± 0.005
E ± 0.005
STYLE A
(Wraparound 3
Sided)
0.250
0.126
0.025
0.025
0.025
0.040
0.046
STYLE B
(Top only)
0.240
0.126
0.025
0.025
0.025
0.040
-
DERATING CURVE
% OF RATED POWER
120
100
80
60
40
20
0
20
50
70
100
150
AMBIENT TEMP. DEG. CENTIGRADE
(Reference only: Not for all values specified. Consult factory for your size and value.)
www.vishay.com
6
For technical questions, contact: [email protected]
Document Number: 68020
Revision: 24-Jul-06
TR and TD
Vishay Techno
High Voltage Resistors and Dividers
FEATURES
• 30 000 volts capability
Pb-free
• Very low voltage coefficient to less than
Available
0.1 ppm/Volt
• Outstanding stability under adverse conditions RoHS*
COMPLIANT
• Stable cermet resistive element bonded to a
high-purity alumina substrate
• Tough epoxy-based coating and high voltage stability
• Designs built from customer supplied schematics
• Dividers available leaded or non-leaded
• Typical resistance ratios of 1000:1, 2000:1, etc.
• TCR tracking to ± 5 ppm/°C depending on values
• Lead (Pb)-free version is RoHS compliant
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
RESISTANCE (Ω)
(Min.)
(Max.)
MAXIMUM
VOLTAGE
(Volts)
2.5K
POWER
RATING
(Watts)
0.25
TR03
300
10G
TR05
500
100G
0.50
5K
TR10
1000
1T
1.00
10K
TR15
1500
1.5T
1.50
15K
TR20
2000
2T
2.00
20K
TR30
3000
3T
3.00
30K
APPLICATIONS
Applications include power supplies, transformers and any
application requiring operation within an environment where
high voltages are used.
NOTE: Custom sizes available
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TR20H1K00FKEB (preferred part number format)
T
R
2
0
H
1
K
0
0
F
K
E
B
GLOBAL
MODEL
SIZE
POWER RATING
RESISTANCE
VALUE
TOLERANCE
TCR
TERMINAL
FINISH
PACKAGING
TR
03
05
10
15
20
30
C = 0.25 W
D = 0.5 W
F = 1.0 W
G = 1.5 W
H = 2.0 W
J = 3.0 W
R = Decimal
K = Thousand
M = Million
G = Billion
T = Trillion
400R = 400 Ω
10M0 = 10 MΩ
1T00 = 1 TΩ
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
M = ± 20.0 %
K = 100 ppm
N = 200 ppm
M = 300 ppm
E = Sn100
R = Sn60/Pb40
B = Bulk
S = Strip
Historical Part Numbering: TR20H1001FKe3 (will continue to be accepted)
TR
20
H
1001
F
K
e3
HISTORICAL
MODEL
SIZE
POWER RATING
RESISTANCE
VALUE
TOLERANCE
TCR
TERMINAL FINISH
New Global Part Numbering: TD20HE100M3301FFEB (preferred part number format)
T
D
2
0
H
E
GLOBAL
MODEL
SIZE
POWER
RATING
RATIO TCR
TD
03
05
10
15
20
30
C = 0.25 W
D = 0.5 W
F = 1.0 W
G = 1.5 W
H = 2.0 W
J = 3.0 W
E = 25 ppm
H = 50 ppm
K = 100 ppm
N = 200 ppm
M = 300 ppm
S = Special
1
0
RESISTANCE
VALUE
0
M
3
3
0
1
F
RATIO
TOLERANCE
RATIO R1/R2 TOLERANCE
R = Decimal
3 digit
K = Thousand
significant
M = Million
figure,
G = Billion
followed by a
multiplier
400R = 400 Ω
10M0 = 10 MΩ 0400 = 40:1
10M7 = 10.7 MΩ 1000 = 100:1
F = ± 1.0 %
G = ± 2.0 %
H = ± 3.0 %
J = ± 5.0 %
F = ± 1.0 %
G = ± 2.0 %
H = ± 3.0 %
J = ± 5.0 %
K = ± 10.0 %
M = ± 20.0 %
F
E
B
TERMINAL
FINISH
PACKAGING
E = Sn100
R = Sn60/Pb40
B = Bulk
S = Strip
Historical Part Numbering: TD20HR10063301FFe3 (will continue to be accepted)
TD
20
H
R
1006
3301
F
F
e3
HISTORICAL
MODEL
SIZE
POWER
RATING
RATIO
TCR
RESISTANCE
VALUE
RATIO R1/R2
RATIO
TOLERANCE
TOLERANCE
TERMINAL
FINISH
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 68000
Revision: 24-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
7
TR and TD
High Voltage Resistors and Dividers
Vishay Techno
MECHANICAL SPECIFICATIONS
DIMENSIONS in inches [millimeters]
Resistive Element: Thick film
Typical Resistor
Schematic for Divider
Substrate: 96 % pure alumina
Encapsulation: Epoxy base, conformal coating
Pin
#1
Terminals: Tin plated copper leads
R2
R1
Terminal Strength: 4.5 pounds pull-test
Typical High
Voltage Divider
Power: Derated from ambient temperature + 25 °C
0.125 [3.18]
Max.
*
*
ENVIRONMENTAL SPECIFICATIONS
Pin
#1
Temperature Range: - 55 °C to + 125 °C (For higher
temperature range, consult factory)
*
* Specified by application
Standard High
Voltage Resistor
ELECTRICAL SPECIFICATIONS
1.25 [31.75]
Min.
*
*
D ± 0.002 [0.051] Dia.
0.125 [3.18]
Max.
A
Resistance Range: 300 Ω to 6 TΩ
B
Resistance Tolerance: ± 0.25 % to ± 20 %
(values over 1 GΩ, consult factory)
1.25 [31.75]
Min.
Ratio Tolerance: 1 % to 20 %
C
Temperature Coefficient: < 100 ppm/°C absolute (values
D ± 0.002 [0.051] Dia.
over 1 GΩ, consult factory)
Dimensions (± 10 %)
Ratio TCR: to 5 ppm/°C (Ratio over 1000:1, consult factory)
MODEL
A
(LENGTH)
B
(HEIGHT)
Voltage Coefficient: Typically less than 1 ppm/V (tested
TR03
0.300 [7.62]
0.210 [5.33]
per MIL-STD-202)
TR05
0.500 [12.70]
0.300 [7.62]
0.400 [10.16]
0.025
TR10
1.00 [25.40]
0.350 [8.89]
0.900 [22.86]
0.032
TR15
1.50 [38.10]
0.350 [8.89]
1.40 [35.56]
0.032
TR20
2.00 [50.80]
0.350 [8.89]
1.90 [48.26]
0.032
TR30
3.00 [76.20]
0.400 [10.16]
2.90 [73.66]
0.032
Maximum Voltage: 30 000 volts (higher available)
Load Life: Less than 0.15 %, 1000 hours
C
D
(LEAD SPACING) (LEAD DIA.)
0.200 [5.08]
0.025
% OF RATED POWER
DERATING
100
High Voltage
Dividers
80
60
40
20
High Voltage
Resistors
0
25
50
75
100
125
150
175
AMBIENT TEMPERATURE °C
www.vishay.com
8
For technical questions, contact: [email protected]
Document Number: 68000
Revision: 24-Jul-06
FHV
Vishay Techno
High Voltage Resistors
FEATURES
• Non-inductive design
•
•
•
•
MECHANICAL SPECIFICATIONS
Terminal Strength: 5 pound pull test
Solderability: Continuous satisfactory coverage when
tested in accordance with MIL-R-10509
Available
Matched sets available
Ratio dividers available
RoHS*
COMPLIANT
Special testing available
Low TCR: ± 200 ppm/°C standard, ± 100 ppm/°C and
± 50 ppm/°C available
• Tolerance: ± 10 %, ± 5 %, ± 2 %, ± 1 % standard tolerance
and/or TCR matching available upon request
• Lead (Pb)-free version is RoHS compliant
TEMPERATURE COEFFICIENT CODE
MATERIAL SPECIFICATIONS
Element: High temperature fired cermet film
Core: High purity 96 % alumina
Coating: Conformal coat epoxy
Termination: Standard lead material is tin plated copper
CODE
TEMPERATURE
COEFFICIENT
RANGE
K
± 100 ppm
- 55 °C to + 125 °C
N
± 200 ppm
- 55 °C to + 125 °C
STANDARD ELECTRICAL SPECIFICATIONS
WATTAGE RATING
at + 70 °C
at + 125 °C
0.25
0.125
0.50
0.25
0.25
0.125
1.0
0.50
1.5
0.75
1.0
0.50
2.0
1.0
2.0
1.0
4.0
2.0
MODEL
FHV025
FHV050
FHV075
FHV100
FHV150
FHV160
FHV200
FHV400
FHV500
RESISTANCE (Ω)1)
± 200 ppm
± 100 ppm
10K - 100M
10K - 100M
10K - 500M
10K - 100M
100 - 1G
500 - 500M
100 - 2G
500 - 1G
10K - 2G
1M - 1G
100 - 2G
500 - 1G
200 - 8G
500M - 1G
20K - 2G
1M - 1G
30K - 10G
1M - 1G
MAXIMUM
VOLTAGE (kV)
0.75
1.5
3.75
7.5
11.25
3.5
15.0
7.5
15.0
1. All resistance values are calibrated at 100 VDC. Calibration at other voltages upon request.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: FHV02510K0FNEB (preferred part number format)
F
GLOBAL
MODEL
FHV
H
V
0
2
5
1
0
K
0
F
N
E
B
SIZE
RESISTANCE VALUE
TOLERANCE
TCR
TERMINAL FINISH
PACKAGING
025
050
075
100
150
160
200
400
500
R = Decimal
K = Thousand
M = Million
G = Billion
400R = 400 Ω
10M0 = 10 MΩ
10G0 = 10 GΩ
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
K = 100 ppm
N = 200 ppm
E = Sn100
R = Sn60/Pb40
B = Bulk
S = Strip
Historical Part Numbering: FHV0251002FMe3 (will continue to be accepted)
FHV
025
1002
F
M
e3
HISTORICAL MODEL
SIZE
RESISTANCE VALUE
TOLERANCE
TCR
TERMINAL FINISH
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 68001
Revision: 21-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
9
FHV
High Voltage Resistors
Vishay Techno
DIMENSIONS in inches [millimeters]
Figure 2
Figure 1
B
0.125 [3.18]
Max.
B
0.125 [3.18]
Max.
A
A
0.080 [2.03]
Ref.
0.050 [1.27]
Ref.
± 0.002 E
[0.051]
C
± 0.032
E 0.010 [0.25]
C
A (Max.)
0.300 [7.62]
0.380 [9.65]
0.210 [5.33]
0.280 [7.11]
0.330 [8.38]
0.550 [13.97]
0.330 [8.38]
0.550 [13.97]
0.550 [13.97]
B (Max.)
0.300 [7.62]
0.380 [9.65]
0.570 [14.48]
1.07 [21.18]
1.57 [39.88]
0.550 [13.97]
2.04 [51.82]
1.05 [26.67]
2.07 [52.58]
C
0.200 [5.08]
0.200 [5.08]
0.400 [10.16]
0.900 [22.86]
1.40 [35.56]
0.400 [10.16]
1.90 [48.26]
0.900 [22.86]
1.90 [48.26]
ENVIRONMENTAL PERFORMANCE
Short Time Overload
< ± 0.2 %
Moisture Resistance
< ± 0.5 %
Shock
< ± 0.2 %
Vibration
< ± 0.2 %
Temperature Cycling
< ± 0.5 %
Load Life
< ± 1.0 %
Dielectric Withstanding Voltage
< ± 0.15 %
Resistance to Soldering Heat
< ± 0.1 %
D
0.250 [6.35]
0.360 [9.14]
1.50 [38.10]
1.50 [38.10]
1.50 [38.10]
1.50 [38.10]
1.50 [38.10]
1.50 [38.10]
1.50 [38.10]
E
0.018 [0.457]
0.020 [0.508]
0.025 [0.635]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
0.032 [0.813]
FIGURE
1
1
2
2
2
2
2
2
2
DERATING
MAXIMUM ΔR
(Typical Test Lots)
TEST
E ± 0.002 [0.051]
Dia.
[0.813]
% OF RATED POWER
MODEL - SIZE
FHV025
FHV050
FHV075
FHV100
FHV150
FHV160
FHV200
FHV400
FHV500
± 0.100
D [2.54]
D ± 0.100
[2.54]
100
80
60
40
20
0
25
75
125
175
225
275
AMBIENT TEMP. DEG. CENTIGRADE
AVERAGE
VOLTAGE COEFFICIENT ppm/V
VOLTAGE COEFFICIENT
0
-5
- 10
- 15
106
107
108 025
RESISTANCE (Ω)
www.vishay.com
10
109
050
1010
160
100 400 200
150
500
For technical questions, contact: [email protected]
Document Number: 68001
Revision: 21-Jul-06
CR
Vishay Techno
Thick Film Chip Resistors
FEATURES
• Flow solderable
•
•
•
•
•
•
•
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
RESISTANCE (Ω)
POWER RATING1) (mW)
CR0001
100 - 500K
100
CR5050
100 - 500K
100
CR0002
100 - 1M
200
CR0003
100 - 1M
250
CR1010
100 - 1M
450
CR1206
100 - 1M
300
CR0004
100 - 1M
325
CR0005
100 - 1M
525
CR2010
100 - 1M
575
1. Higher values available. Please consult our application engineer
at +1-909-923-3313.
Custom sizes available
Burn-in data available
Automatic placement capability
Top and wraparound terminations
Tape and reel packaging available
Internationally standardized sizes
Lead (Pb)-free version is RoHS compliant
Available
RoHS*
COMPLIANT
ELECTRICAL SPECIFICATIONS
Resistance Range: 100 Ω to 1 MΩ
(Higher values available)
Resistance Tolerance: ± 1 %, ± 2 %, ± 5 %, ± 10 %, ± 20 %
Temperature Coefficient: (- 55 °C to + 150 °C)
± 100 ppm/°C: Standard thru 1 MΩ
± 200 ppm/°C: 1.1 MΩ thru 10 MΩ
Power Rating: 100 mW thru 575 mW
Short Time Overload: Less than 0.5 % ΔR
ENVIRONMENTAL SPECIFICATIONS
Operating Temperature: - 55 °C to + 150 °C
Moisture Resistance: Less than 0.5 % change when tested
per Method 106 of MIL-STD-202
Life: Less than 1 % change when tested per Method 108D
(+ 85 °C) of MIL-STD-202
MECHANICAL SPECIFICATIONS
Construction: 96 % alumina substrate with proprietary
cermet resistance element and specified termination material
DIMENSIONS in inches [millimeters]
Termination Style B
(Top conductor only)
Termination Style A
(3-sided wraparound)
W
Termination Style C
(5-sided wraparound)
W
L
W
L
T
MODEL
L
T
T
0.025 [0.635]
Max.
0.025 [0.635]
Max.
0.025 [0.635]
Max.
CR0001
CR5050
CR0002
CR0003
CR1010
CR1206
CR0004
CR0005
CR2010
LENGTH (L)2)
± 0.006 [0.152]
0.050 [1.27]
0.050 [1.27]
0.075 [1.90]
0.100 [2.54]
0.100 [2.54]
0.125 [3.18]
0.150 [3.81]
0.225 [5.72]
0.200 [5.08]
WIDTH (W)2)
± 0.006 [0.152]
0.040 [1.02]
0.050 [1.27]
0.050 [1.27]
0.050 [1.27]
0.100 [2.54]
0.062 [1.57]
0.050 [1.27]
0.075 [1.90]
0.100 [2.54]
THICKNESS (T)2)
± 0.002 [0.051]
0.012 [0.305]
0.010 [0.254]
0.015 [0.381]
0.015 [0.381]
0.020 [0.508]
0.025 [0.635]
0.015 [0.381]
0.015 [0.381]
0.020 [0.508]
2. All dimensions are before solder coating.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: CR0001AA1K00FKSB (preferred part number format)
C
GLOBAL
MODEL
CR
R
SIZE
0001
5050
0002
0003
1010
1206
0004
0005
2010
0
TERM
STYLE
A = 3-sided
B = top only
C = 5-sided
0
0
1
A
A
1
TERM MATERIAL
RESISTANCE
VALUE
A = Palladium Silver
B = Platinum Gold
C = Gold
D = Platinum Silver
E = Platinum
Palladium Gold
R = Decimal
K = Thousand
M = Million
100R = 100 Ω
1K00 = 1 kΩ
1M00 = 1 MΩ
K
0
0
F
TOLERANCE
TCR
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
M = ± 20.0 %
K = 100 ppm
L = 150 ppm
N = 200 ppm
W = 350 ppm
K
S
B
SOLDER
TERMINATION PACKAGING
S=
Sn62/Pb36/Ag2
F = Sn95/Ag5
N = No Solder
B = Bulk
T = Tape and
Reel
W = Waffle
Historical Part Numbering: CR1AA1001F100S2 (will continue to be accepted)
CR
1
A
A
1001
F
100
S2
HISTORICAL
MODEL
SIZE
TERM
STYLE
TERM
MATERIAL
RESISTANCE
VALUE
TOLERANCE
TCR
SOLDER
TERMINATION
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 68013
Revision: 21-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
11
TPR
Vishay Techno
Thick Film Technology Power Resistors
20 Watt and 30 Watt TO-220 Package
FEATURES
• Available with 20 or 30 Watt power rating
• Convenient TO-220 package
RoHS
• 20 Watt: Resistance range 1 Ω to 1 MΩ
COMPLIANT
• 30 Watt: Resistance range 1 Ω to 100 kΩ
• Tolerance ± 1 % standard
• TCR to ± 50 ppm/°C; ± 100 ppm/°C standard
• Non-Inductive Design
• Isolated electrical element
• 100 % lead (Pb)-free and RoHS compliant
The well known TO-220 package combined with the proven
thick film technology provides you, the design engineer, with
a high reliable and cost effective solution for applications
requiring current limiting/current sensing.
DIMENSIONS in inches
0.175 ± 0.015
0.400 ± 0.010
0.142 ± 0.003 DIA
The chips unique attachment to the solder coated copper
base provides a repeatable low thermal resistance path for
the energy to exit the resistor and be dissipated into the
heatsink.
0.052
± 0.003
0.125 ± 0.005
0.240 ± 0.010
0.580 ± 0.010
TPR-XXXX
KK
The popular TO-220 package can be handled easily by the
manufacturing group.
0.130 ± 0.005
Vishay has additional solutions when higher Technical
Performance is required such as the VPR220 and VPR221.
0.540 ± 0.040
0.050 ± 0.002
0.023 ± 0.002
0.030 ± 0.002
0.200 ± 0.010
0.085 ± 0.010
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TPR201K00KKEB (preferred part number format)
T
P
R
2
0
1
K
0
0
K
K
E
B
GLOBAL
MODEL
POWER
RATING
RESISTANCE VALUE
TOLERANCE
TCR
TERMINAL
FINISH
PACKAGING
TPR
20
30
R = Decimal
K = Thousand
400R = 400 Ω
1K00 = 1.0 kΩ
10K0 = 10 kΩ
1M00 = 1 MΩ
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
K = ± 10.0 %
H = 50 ppm
K = 100 ppm
M = 300 ppm
E = Sn100
B = Bulk
Historical Part Numbering: TPR201001KKe3 (will continue to be accepted)
TPR
20
1001
K
K
e3
HISTORICAL MODEL
POWER
RATING
RESISTANCE VALUE
TOLERANCE
TCR
TERMINAL
FINISH
www.vishay.com
12
For technical questions, contact: [email protected]
Document Number: 68018
Revision: 24-Jul-06
TPR
Thick Film Technology Power Resistors
20 Watt and 30 Watt TO-220 Package
ELECTRICAL SPECIFICATIONS
Vishay Techno
MECHANICAL SPECIFICATIONS
Resistance Range: 20 Watt: 1 Ω to 1 MΩ
30 Watt: 1 Ω to 100 kΩ
STD Resistance Tolerance: ± 1 %, ± 2 %, ± 5 % and ± 10 %
(tighter available)
Power Dissipation:
TPR20:
20 Watts at 25 °C with heatsink
2 ¼ Watts at 25 °C without heatsink
TPR30:
30 Watts at 25 °C with heatsink
2 ½ Watts at 25 °C without heatsink
Temperature Coefficient: ± 100 ppm/°C Std
(± 50 ppm/°C available)
Short Time Overload: 2 times rated power with applied
voltage not to exceed 375 VDC for 5 seconds
Maximum Working Voltage: 250 VDC
Limiting Element Voltage: 250 VDC
Dielectric Strength: 2000 VRMS
Insulation Resistance: 20 GΩ min
Mechanical Protection: Molded case
Resistive Element: Thick Film
Terminals: Tinned copper
Weight: 2 grams
ENVIRONMENTAL SPECIFICATIONS (TYPICAL)
Temperature Range: - 55 °C to + 155 °C
Terminal Strength: MIL-STD-202, Method 211
Thermal Shock: MIL-STD-202, Method 107
Moisture Resistance: MIL-STD-202, Method 106
Life: 1000 hours MIL-STD-202, 25 °C
Shock: MIL-STD-202 Method 213
Vibration: MIL-STD-202, Method 204
DERATING
155 °C
% OF RATED POWER
[Dissipation Reduction]
100 %
80 %
60 %
40 %
20 %
0
+ 25 °C
+ 50 °C
+ 75 °C + 100 °C + 125 °C + 150 °C + 175 °C
AMBIENT TEMPERATURE °C
STANDARD MILITARY PRESENTATION OF POWER DERATING
PERFORMANCE
TEST AND MIL REF.
CONDITION
TYPICAL DRIFT
Short Time Overload
2 x rated power for 5 seconds
< 0.10 %
5 cycles - 65 °C to + 125 °C, at rated power
< 0.10 %
1000 hours at rated power and 25 °C ambient
< 0.25 %
56 days 95 % R.H.
< 0.30 %
Temperature Cycling with Power
Load Life MIL-STD 202, Method 108 and 302
Humidity (steady state)
Document Number: 68018
Revision: 24-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
13
TCN
Vishay Techno
Capacitor Networks, Coated SIP
FEATURES
•
•
•
•
•
NPO or X7R capacitors for line terminator
Wide operating temperature range (- 55 °C to 125 °C)
Epoxy based conformal coating
Solder coated copper terminals
Solderability per MIL-STD-202 method 208E
• Marking resistance to solvents per MIL-STD-202 method 215
STANDARD ELECTRICAL SPECIFICATIONS
CAPACITANCE RANGE
NPO*
X7R
01
33 pF - 3900 pF
470 pF - 0.1 µF
TCN
02
33 pF - 3900 pF
470 pF - 0.1 µF
09
33 pF - 3900 pF
470 pF - 0.1 µF
* NPO capacitors may be substituted for X7R capacitors
MODEL
SCHEMATIC
CAPACITANCE TOLERANCE**
±%
CAPACITANCE VOLTAGE
VDC
± 10 %, ± 20 %
± 10 %, ± 20 %
± 10 %, ± 20 %
** Tighter tolerances available on request
SCHEMATICS
50
50
50
DIMENSIONS in inches [millimeters]
0.130 [3.30]
Max.
SCHEMATIC 01
A Max.
C
C
C
C
C
Pin #1 Identifier
C
Max.
2
1
3
4
n-1
n
0.125 ± 0.015
[3.18 ± 0 .381]
SCHEMATIC 02
C
1
C
3
2
C
4
n-1
n
n-1
n
NUMBER
OF PINS
6
7
8
9
10
11
12
SCHEMATIC 09
C
1
C
2
C
3
C
4
(Seating
Plane)
0.020 ± 0.002
[0.508 ± 0.051]
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
B
Note: Custom schematics available
A
(Max.)
0.590 [14.99]
0.690 [17.53]
0.790 [20.07]
0.890 [22.61]
0.990 [25.15]
1.09 [27.69]
1.19 [30.23]
0.010 ± 0.002
[0.254 ± 0.051]
B
± 0.005 [0.127]
0.500 [12.70]
0.600 [15.24]
0.700 [17.78]
0.800 [20.32]
0.900 [22.86]
1.00 [25.40]
1.10 [27.94]
C
(Max.)
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TCN0801101KNTB (preferred part number format)
T
C
N
0
8
0
1
1
0
1
K
N
T
B
GLOBAL
MODEL
PIN
COUNT
SCHEMATIC
CAPACITANCE
VALUE
TOLERANCE
CHARACTERISTIC
TERMINAL
FINISH
PACKAGING
TCN
06 = 6 pin
07 = 7 pin
08 = 8 pin
09 = 9 pin
10 = 10 pin
11 = 11 pin
12 = 12 pin
01
02
09
(in picofarads)
2 digit significant
figure, followed by
a multiplier
101 = 100 pF
392 = 3900 pF
104 = 0.1 µF
K = ± 10 %
M = ± 20 %
N = NPO
X = X7R
T = 10Sn/88Pb/2Ag
B = Bulk
Historical Part Numbering: TCN0801101KS10 (will continue to be accepted)
TCN
08
01
101
K
S10
HISTORICAL MODEL
PIN COUNT
SCHEMATIC
CAPACITANCE
VALUE
TOLERANCE
TERMINAL FINISH
www.vishay.com
14
For technical questions, contact: [email protected]
Document Number: 68003
Revision: 21-Jul-06
MCN
Vishay Techno
Capacitor Networks, Molded SIP
FEATURES
•
•
•
•
•
•
Custom schematics available
NPO or X7R capacitors for line terminator
Wide operating temperature range (- 55 °C to 125 °C)
Molded epoxy case
Solder coated copper terminals
Solderability per MIL-STD-202 method 208E
• Marking resistance to solvents per MIL-STD-202 method 215
STANDARD ELECTRICAL SPECIFICATIONS
CAPACITANCE RANGE
NPO*
X7R
01
33 pF - 3900 pF
470 pF - 0.1 µF
MCN
02
33 pF - 3900 pF
470 pF - 0.1 µF
09
33 pF - 3900 pF
470 pF - 0.1 µF
* NPO capacitors may be substituted for X7R capacitors
MODEL
SCHEMATIC
CAPACITANCE TOLERANCE**
±%
CAPACITANCE VOLTAGE
VDC
± 10 %, ± 20 %
± 10 %, ± 20 %
± 10 %, ± 20 %
** Tighter tolerances available on request
SCHEMATICS
50
50
50
DIMENSIONS in inches [millimeters]
SCHEMATIC 01
0.150 ± 0.010
[3.81 ± 0.254]
A
C
C
C
C
C
B
1
2
3
4
n-1
SCHEMATIC 02
C
C
Pin #1 Identifier
n
(Seating
Plane)
0.020 ± 0.002
[0.508 ± 0.051]
C
0.020 ± 0.002
[0.508 ± 0.051]
0.125 ± 0.015
[3.18 ± 0.381]
1
2
3
4
9
C
10
SCHEMATIC 09
C
1
C
2
C
3
n-1
0.010 ± 0.002
[0.254 ± 0.051]
NUMBER
OF PINS
A
± 0.010 [0.254]
B
± 0.010 [0.254]
C
± 0.010 [0.254]
5
0.620 [15.75]
0.305 [7.75]
0.110 [2.79]
8
0.780 [19.81]
0.325 [8.26]
0.040 [1.02]
9
0.940 [23.88]
0.246 [6.25]
0.075 [1.91]
10
1.040 [26.42]
0.346 [8.79]
0.075 [1.91]
C
4
0.100 ± 0.005 [2.54 ± 0.127]
Non-Cumulative
n
Note: Custom schematics available
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MCN0801101KNTB (preferred part number format)
M
C
N
0
8
0
1
1
0
1
K
N
T
B
GLOBAL
MODEL
PIN
COUNT
SCHEMATIC
CAPACITANCE
VALUE
TOLERANCE
CHARACTERISTIC
TERMINAL
FINISH
PACKAGING
MCN
05 = 5 pin
08 = 8 pin
09 = 9 pin
10 = 10 pin
01
02
09
(in picofarads)
2 digit significant
figure, followed by
a multiplier
101 = 100 pF
392 = 3900 pF
104 = 0.1 µF
K = ± 10 %
M = ± 20 %
N = NPO
X = X7R
T = 10Sn/88Pb/2Ag
B = Bulk
Historical Part Numbering: MCN0801101KS10 (will continue to be accepted)
MCN
08
01
101
K
S10
HISTORICAL
MODEL
PIN COUNT
SCHEMATIC
CAPACITANCE
VALUE
TOLERANCE
TERMINAL
FINISH
Document Number: 68004
Revision: 24-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
15
TRC
Vishay Techno
Resistor/Capacitor Networks, Coated SIP
FEATURES
• Thick film resistors
• NPO or X7R capacitors for line terminator
• Wide operating temperature range (-55 °C to 125 °C)
• Custom Resistor/Capacitor schematics available
STANDARD ELECTRICAL SPECIFICATIONS
RESISTOR CHARACTERISTICS
CAPACITOR CHARACTERISTICS
CAPACITANCE CAPACITANCE
TEMP.
MODEL SCHEMATIC POWER RESISTANCE RESISTANCE
RATING
VOLTAGE
TOLERANCE***
TOLERANCE COEFF. TYPE** CAPACITANCE
RANGE
(Ω)
P70 °C W
VDC
±%
± ppm/°C
±%
NPO 33 pF - 3900 pF
10 %, 20 %
2
%,
5
%
01
0.20
50 - 1K
150 ppm
50
(*1 %)
X7R
470 pF - 0.1 µF
10 %, 20 %
NPO
33
pF
3900
pF
10
%,
20
%
2 %, 5 %
TRC
02
0.20
50 - 1K
150 ppm
50
(*1 %)
X7R
470 pF - 0.1 µF
10 %, 20 %
NPO
33
pF
3900
pF
10
%,
20
%
2 %, 5 %
150 ppm
50
09
0.20
50 - 1 k
(*1 %)
X7R
470 pF - 0.1 µF
10 %, 20 %
* ± 1 % tolerance available on request
*** Tighter tolerances available on request
** NPO Capacitors may be substituted for X7R Capacitors
SCHEMATICS
DIMENSIONS in inches [millimeters]
SCHEMATIC 01
0.130
[3.30]
Max.
A Max.
Pin #1 Identifier
C Max.
Seating
Plane
0.125 ± 0.015
[3.18 ± 0.381]
1
2
3
4
n-1
0.020 ± 0.002
[0.508 ± 0.051]
n
SCHEMATIC 02
0.010 ± 0.002
[0.254 ± 0.051]
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
B
1
2
3
2
3
4
n-1
NUMBER
OF PINS
6
7
8
9
10
11
12
n
SCHEMATIC 09
1
4
n-1
n
A
(Max.)
0.590 [14.99]
0.690 [17.53]
0.790 [20.07]
0.890 [22.61]
0.990 [25.15]
1.09 [27.69]
1.19 [30.23]
B
± 0.005 [0.127]
0.500 [12.70]
0.600 [15.24]
0.700 [17.78]
0.800 [20.32]
0.900 [22.86]
1.00 [25.40]
1.10 [27.94]
C
(Max.)
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
0.350 [8.89]
Note: Other sizes available
Note: Custom schematics available
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TRC0801101J560KNTB (preferred part number format)
T
GLOBAL
MODEL
TRC
R
C
0
8
0
1
1
0
1
J
5
6
0
K
N
T
B
PIN
TERMINAL PACKAGING
SCHEMATIC RESISTANCE RESISTANCE CAPACITANCE CAPACITANCE CHARACTERISTIC
COUNT
VALUE
TOLERANCE
VALUE
TOLERANCE
FINISH
(in picofarads)
06 = 6 pin
01
2 digit
F = ± 1.0 %
K = ± 10 %
N = NPO
T=
B = Bulk
2 digit
02
significant
10Sn/88Pb/2Ag
07 = 7 pin
G = ± 2.0 %
M = ± 20 %
X = X7R
significant
09
figure,
08 = 8 pin
J = ± 5.0 %
figure, followed
followed by a
09 = 9 pin
by a multiplier
multiplier
10 = 10 pin
11 = 11 pin
101 = 100 Ω
101 = 100 pF
12 = 12 pin
220 = 22 Ω
392 = 3900 pF
102 = 1 kΩ
104 = 0.1 µF
Historical Part Numbering: TRC0801101J560KS10 (will continue to be accepted)
TRC
08
01
101
J
560
K
S10
HISTORICAL
MODEL
PIN
COUNT
SCHEMATIC
RESISTANCE
VALUE
RESISTANCE
TOLERANCE
CAPACITANCE
VALUE
CAPACITANCE
TOLERANCE
TERMINAL
FINISH
www.vishay.com
16
For technical questions, contact: [email protected]
Document Number: 68007
Revision: 21-Jul-06
MRCN
Vishay Techno
Resistor/Capacitor Networks, Molded SIP
FEATURES
•
•
•
•
•
•
•
Custom schematics available
NPO or X7R capacitors for line terminator
Wide operating temperature range (- 55 °C to 125 °C)
Molded epoxy case
Solder coated copper terminals
Solderability per MIL-STD-202 method 208E
Marking resistance to solvents per MIL-STD-202 method 215
STANDARD ELECTRICAL SPECIFICATIONS
RESISTOR CHARACTERISTICS
CAPACITOR CHARACTERISTICS
CAPACITANCE CAPACITANCE
MODEL SCHEMATIC POWER RESISTANCE RESISTANCE TEMP.
RATING
VOLTAGE
TOLERANCE***
TOLERANCE COEFF. TYPE** CAPACITANCE
RANGE
(Ω)
P70 °C W
VDC
±%
± ppm/°C
±%
NPO 33 pF - 3900 pF
10 %, 20 %
2 %, 5 %
150 ppm
50
10
0.20
50 - 1K
(*1 %)
X7R 470 pF - 0.1 µF
10 %, 20 %
NPO 33 pF - 3900 pF
10 %, 20 %
2 %, 5 %
20
0.20
50 - 1K
150 ppm
50
MRCN
(*1 %)
X7R 470 pF - 0.1 µF
10 %, 20 %
NPO 33 pF - 3900 pF
10 %, 20 %
2 %, 5 %
30
0.20
50 - 1K
150 ppm
50
(*1 %)
X7R 470 pF - 0.1 µF
10 %, 20 %
* ± 1 % tolerance available on request
*** Tighter tolerances available on request
** NPO Capacitors may be substituted for X7R Capacitors
SCHEMATICS
DIMENSIONS in inches [millimeters]
SCHEMATIC 10
10K ECL
terminator
network
R
C
R
SCHEMATIC 20
4
5
6
7
C
R
R
R
3
Pin #1 Identifier
0.020 ± 0.002
[0.508 ± 0.051]
(Seating
Plane)
0.020 ± 0.002
[0.508 ± 0.051]
0.125 ± 0.015
[3.18 ± 0.381]
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
n
n-1
4
A
B
8
C
2
0.150 ± 0.010
[3.81 ± 0.254]
#1 Pin
R
C
C
R
100K ECL
terminator
network
R
R
C
1
SCHEMATIC 30
3
2
1
R
R
1
2
C
R
R
3
4
5
R
6
7
R
8
9
NUMBER
OF PINS
10
Note: Custom schematics available
A
± 0.010 [0.254]
0.010 ± 0.002
[0.254 ± 0.051]
B
± 0.010 [0.254]
C
± 0.010 [0.254]
8
0.780 [19.81]
0.345 [8.26]
0.040 [1.02]
10
1.040 [26.42]
0.346 [8.79]
0.075 [1.91]
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: MRCN081101J560KNTB (preferred part number format)
M
GLOBAL
MODEL
MRCN
R
C
N
0
8
1
PIN
SCHEMATIC RESISTANCE
COUNT
VALUE
2 digit
08 = 8 pin
1 = 10
significant
10 = 10 pin
2 = 20
figure,
3 = 30
followed by a
multiplier
101 = 100 Ω
220 = 22 Ω
102 = 1 kΩ
1
RESISTANCE
TOLERANCE
F = ± 1.0 %
G = ± 2.0 %
J = ± 5.0 %
0
1
J
5
6
CAPACITANCE CAPACITANCE
VALUE
TOLERANCE
(in picofarads)
K = ± 10 %
2 digit
M = ± 20 %
significant
figure, followed
by a multiplier
101 = 100 pF
392 = 3900 pF
104 = 0.1 µF
0
K
N
CHARACTERISTIC
N = NPO
X = X7R
T
B
TERMINAL
PACKAGING
FINISH
T=
B = Bulk
10Sn/88Pb/2Ag
T = Tray
Historical Part Numbering: MRCN0801101J560KS10 (will continue to be accepted)
MRCN
08
01
101
J
560
K
S10
HISTORICAL
MODEL
PIN
COUNT
SCHEMATIC
RESISTANCE
VALUE
RESISTANCE
TOLERANCE
CAPACITANCE
VALUE
CAPACITANCE
TOLERANCE
TERMINAL
FINISH
Document Number: 68008
Revision: 26-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
17
TxxS
Vishay Techno
Single-In-Line, Coated, 4 Bits to 8 Bits
R/2R Ladder Networks
APPLICATIONS
R/2R Ladder networks for D/A and A/D converter with
bi-polar or CMOS switches
ELECTRICAL SPECIFICATIONS
Ladder Network Accuracy on Linearity: ± 1/2 LSB
Ladder Network Resistance Tolerance: ± 2 %
Temperature Coefficient of Resistance: ± 100 ppm/°C
Operating Temperature Range: - 55 °C to + 125 °C
Power Dissipation Rating at + 70 °C Ambient:
50 mW/element
Standard Resistance Values (R): 5 kΩ, 10 kΩ, 25 kΩ,
50 kΩ and 100 kΩ
SCHEMATIC
R
n Bits:
n = 4 thru 8
2R
1
GRD
R
2R
R
2R
2
Bn
(LSB)
3
Bn-1
R
R
2R
R
2R
4
Bn-2
2R
n-1
B3
n
B2
2R
n+1
B1
(MSB)
n+2
OUT
DIMENSIONS in inches [millimeters]
0.100 [2.54]
Max.
A
NUMBER OF
PINS
A
(Max.)
B
± 0.005 [0.127]
C
(Max.)
6
0.590
[14.99]
0.500
[12.70]
0.350
[8.89]
7
0.690
[17.53]
0.600
[15.24]
0.350
[8.89]
8
0.790
[20.07]
0.700
[17.78]
0.350
[8.89]
9
0.890
[22.61]
0.800
[20.32]
0.350
[8.89]
10
0.990
[25.15]
0.900
[22.86]
0.350
[8.89]
Pin #1 Identifier
C
Seating
Plane
0.140 ± 0.020
[3.56 ± 0.508]
0.010 ± 0.002
[0.254 ± 0.051]
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
0.020 ± 0.002
[0.508 ± 0.051]
B
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: T10S08100KRB (preferred part number format)
T
1
0
S
0
8
1
0
0
K
R
B
GLOBAL MODEL
NUMBER OF BITS
RESISTANCE VALUE [R]
TERMINAL FINISH
PACKAGING
T06S = 6 pins
T07S = 7 pins
T08S = 8 pins
T09S = 9 pins
T10S = 10 pins
04 = 4 Bits (6 pins)
05 = 5 Bits (7 pins)
06 = 6 Bits (8 pins)
07 = 7 Bits (9 pins)
08 = 8 Bits (10 pins)
K = Thousand
5K00 = 5 kΩ
5K10 = 5.1 kΩ
100K = 100 kΩ
Reference Schematic
If R = 5 kΩ, then 2R = 10 kΩ
If R = 100 kΩ, then 2R = 200 kΩ
R = Sn60/Pb40
B = Bulk
Historical Part Numbering: T10S08104 (will continue to be accepted)
T10S
08
104
HISTORICAL MODEL
NUMBER OF BITS
RESISTANCE VALUE [R]
www.vishay.com
18
For technical questions, contact: [email protected]
TERMINAL FINISH
Document Number: 68010
Revision: 24-Jul-06
T16L08 and T16LR8
Vishay Techno
Dual-In-Line, 8 Bit
R/2R Ladder Networks
APPLICATIONS
8 Bit, R/2R Ladder networks for D/A and A/D converter with
bi-polar or CMOS switches
ELECTRICAL SPECIFICATIONS
Ladder Network Accuracy: ± 1/2 LSB from 0 °C to + 70 °C
Ladder Network Resistance Tolerance: ± 2 %
Temperature Coefficient of Resistance: ± 100 ppm/°C
Operating Temperature Range: 0 °C to + 70 °C
Power Dissipation Rating at + 70 °C Ambient: 50 mW for
individual resistor and 1.8 W total package rating
Standard Resistance Values (R): 25 kΩ, 50 kΩ, 100 kΩ
SCHEMATICS
T16L08
16
15
14
13
R2 = R
R4 = R
R6 = R
R1 = 2R
R3 = 2R
R5 = 2R
1
12
R8 = R
4
14
13
R9 = 2R
10
9
R12 = R
R14 = R
R16 = 2R
R11 = 2R
R13 = 2R
R15 = 2R
R10 = R
R7 = 2R
23
11
56
7
8
T16LR8
16
15
12
R2 = R
R4 = R
R6 = R
R8 = R
R1 = 2R
R3 = 2R
R5 = 2R
R7 = 2R
1
2
3
4
11
R10 = R
R9 = 2R
5
10
9
R12 = R
R14 = R
R16 = 2R
R11 = 2R
R13 = 2R
R15 = 2R
6
7
8
RATIO MATCH TOLERANCE
R1/R2 = 2 ± 1 %
R1/R3 = 1 ± 1 %
R1/R4 = 2 ± 1 %
R1/R5 = 1 ± 1 %
R1/R6 = 2 ± 1 %
R1/R7 = 1 ± 1 %
R1/R8 = 2 ± 1 %
R9/R10 = 2 ± 0.5 %
R11/R12 = 2 ± 0.4 %
R15/R13 = 1 ± 0.2 %
R15/R14 = 2 ± 0.2 %
DIMENSIONS in inches [millimeters]
0.260 ± 0.005
[6.60 ± 0.127]
0.045 ± 0.020
[1.14 ± 0.508]
0.845 ± 0.030
[21.46 ± 0.762]
0.300 ± 0.010
[7.62 ± 0.254]
0.170 ± 0.020
[4.32 ± 0.508]
0.065 ± 0.020
[1.65 ± 0.508]
0.020 ± 0.002
[0.508 ± 0.051]
0.060 ± 0.005
[1.52 ± 0.127]
0.100 ± 0.005 [2.54 ± 0.127]
Non-Cumulative
0.010 ± 0.002
[0.254 ± 0.051]
0° to 15°
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: T16L08100KTT (preferred part number format)
T
1
6
L
0
8
1
0
0
K
T
T
GLOBAL MODEL
SCHEMATIC
RESISTANCE VALUE
TERMINAL FINISH
PACKAGING
T16L
08
R8
K = Thousand
5K00 = 5 kΩ
5K10 = 5.1 kΩ
100K = 100 kΩ
Reference Schematic
If R = 5 kΩ, then 2R = 10 kΩ
If R = 100 kΩ, then 2R = 200 kΩ
T = Sn10/Pb88/Ag2
T = Tube
Historical Part Numbering: T16L08104S10 (will continue to be accepted)
T16L
08
104
S10
HISTORICAL MODEL
SCHEMATIC
RESISTANCE VALUE [R]
TERMINAL FINISH
Document Number: 68011
Revision: 24-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
19
T14L10
Vishay Techno
Dual-In-Line, 10 Bit
R/2R Ladder Networks
APPLICATIONS
10 Bit, R/2R Ladder networks for D/A and A/D converter with
bi-polar or CMOS switches
ELECTRICAL SPECIFICATIONS
Ladder Network Accuracy: ± 1 LSB from 0 °C to + 70 °C
Ladder Network Resistance Tolerance: ± 2 %
Temperature Coefficient of Resistance: ± 100 ppm/°C
Operating Temperature Range: 0 °C to + 70 °C
Power Dissipation Rating at + 70 °C Ambient: 50 mW for
individual resistor and 1.6 W total package rating
Standard Resistance Values (R): 25 kΩ, 50 kΩ, 100 kΩ
SCHEMATIC
14
13
12
11
10
9
8
RATIO MATCH TOLERANCE
R20 = 2R
1
R2 = R
R4 = R
R1 = 2R
R3 = 2R
2
R19 = 2R
R17 = 2R
R15 = 2R
R18 = R
R16 = R
R14 = R
R6 = R
R8 = R
R10 = R
R5 = 2R
R7 = 2R
R9 = 2R
3
4
5
R12 = R
R11 = 2R
R13 = 2R
6
R1/R2 = 2 ± 1 %
R9/R10 = 2 ± 0.5 %
R1/R3 = 1 ± 1 %
R11/R12 = 2 ± 0.4 %
R1/R4 = 2 ± 1 %
R13/R14 = 2 ± 0.2 %
R1/R5 = 1 ± 1 %
R15/R16 = 2 ± 0.2 %
R1/R6 = 2 ± 1 %
R19/R17 = 1 ± 0.1 %
R1/R7 = 1 ± 1 %
R19/R18 = 2 ± 0.1 %
R1/R8 = 2 ± 1 %
7
DIMENSIONS in inches [millimeters]
0.045 ± 0.020
[1.14 ± 0.508]
0.260 ± 0.005
[6.60 ± 0.127]
0.745 ± 0.030
[18.92 ± 0.762]
0.300 ± 0.010
[7.62 ± 0.254]
0.170 ± 0.020
[4.32 ± 0.508]
0.065 ± 0.020
[1.65 ± 0.508]
0.060 ± 0.005
[1.52 ± 0.127]
0.020 ± 0.002
[0.508 ± 0.051]
0° to 15°
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
0.010 ± 0.002
[0.254 ± 0.051]
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: T14L10100KTT (preferred part number format)
T
1
4
L
1
0
1
0
0
K
T
T
GLOBAL MODEL
SCHEMATIC
RESISTANCE VALUE
TERMINAL FINISH
PACKAGING
T14L
10
K = Thousand
5K00 = 5 kΩ
5K10 = 5.1 kΩ
100K = 100 kΩ
Reference Schematic
If R = 5 kΩ, then 2R = 10 kΩ
If R = 100 kΩ, then 2R = 200 kΩ
T = Sn10/Pb88/Ag2
T = Tube
Historical Part Numbering: T14L10104S10 (will continue to be accepted)
T14L
10
104
S10
HISTORICAL MODEL
SCHEMATIC
RESISTANCE VALUE [R]
TERMINAL FINISH
www.vishay.com
20
For technical questions, contact: [email protected]
Document Number: 68012
Revision: 24-Jul-06
Custom Networks
Vishay Techno
Molded SIPS, DIPS, Coated SIPS
FEATURES
• Fast turnaround time
• Unlimited schematics possible
• Design through production
• Processed to MIL-PRF-83401
• High temperature solder joints
• Made in the U.S.A
• Wide resistance range
• R, C, L, D Multicomponent networks
• Ultra high precision laser trimming
• Double sided printing and through holes/VIAs
• High density circuit designs
• Tighter parameters available
• High power ratings available
• Custom resistor, capacitor, diode and inductor
network combinations
SCHEMATICS
DIPS
16
SIPS, Molded
15
14
R2
13
R4
12
R5
11
10
R7
R7
R10
R2
R6
R8
R3
2
3
4
5
6
7
8
16
15
14
13
12
11
10
9
R10
R R R R14
11 12 13
R15
R4
R2
2
13
3
1
2
12
3
4
5
6
7
8
9
10
CR4
D1
R6
+ 5 V CONTROL PREAMP
GND
XDCR
R3
R4
R5
CR3
L1
30K
11K
75K
R3
R4
C3 0.001 R5
µF
100K 1000K
R2
R5
R7
R8
R9
10K
D2 R1 R2
R6
5
11
10
R8 R9 C2 0.1
µF
R8
6
7
9
8
75K
R6
R7 0.01
470 Ω 11K C1 µF
D3
R7
R5
4
R4
R8
CR1
R16
R4
R3
R2
R3
C2
R1
R1
CR2
R1
R6
R11
1
14
C1
R1
R3
1
R9
R5
R9
R1
R
9
SIPS, Coated
9
1
2
3
4
5
6
7
8
9
10
1
2
8
3
4
5
6
7
8
9 10 11 12 13
0.10 µF
0.10 µF
R2
R12
R3
R4
R1
1
R6
R7
R5
2
3
R9
5
R3
R2
R4
R6
R5
R8
R9
100K
0.10
µF
0.10 µF
150K
150
1M 300K pF 200K
R7
R10
R8
4
R1
5.1K
R11
6
1
7
2
3
4
5
6
7
8
9
10
1M
5.1K
150
pF
330 Ω
1K
5.1K
1 2 3 4 5 6 7 8 9 10 1
1M 220
Ω
1 12 13 14
ELECTRICAL SPECIFICATIONS
MECHANICAL SPECIFICATIONS
Resistance Range: 1 Ω to 50 MΩ
Tolerance: ± 0.5 %. Tighter tolerances available
Temperature Coefficient: ± 50 ppm/°C available
TCR Tracking: ± 50 ppm/°C available
Ratio Matching: ± 0.5 % available
Power Per Resistor: 1/8 W at + 70 °C typical
Resistive Element: Thick film
Solder Joints: High temperature SN10
Encapsulation: Thermoset Epoxy for molded. Epoxy for
conformal coated
Lead Lengths: 0.060" [1.52 mm] to 0.190" [4.83 mm]
molded, 0.060" [1.52 mm] to 0.290" [7.37 mm] coated
Substrates: 96 % alumina, Thicknesses: 0.020" [0.508 mm]
to 0.040" [1.016 mm]
Resistor Coatings: Glass passivation, dielectrics for
crossovers
ENVIRONMENTAL SPECIFICATIONS
Temperature Limits: - 65 °C to + 125 °C
Document Number: 68009
Revision: 24-Jul-06
For technical questions, contact: [email protected]
www.vishay.com
21
Custom Networks
Vishay Techno
Molded SIPS, DIPS, Coated SIPS
DIMENSIONS in inches [millimeters]
DIPS
0.045 ± 0.020
[1.14 ± 0.508]
A
Max.
0.300
[7.62]
B
Max.
0.260
[6.60]
C Max.
Pin #1 Identifier
0.020 ± 0.002
[0.508 ± 0.051]
0.100 ± 0.005 [2.54 ± 0.127]
Non-Cumulative
SIPS, Molded
SIPS, Coated
D
Max.
A
Max.
Pin #1 Identifier
0.018 ± 0.003
[0.457 ± 0.076]
D
Max.
A
Max.
0.015 [0.381]
Min.
B
Max.
C
Max.
0.020 ± 0.003
[0.508 ± 0.076]
Pin #1 Identifier
B
Max.
C
Max.
0.010 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
MODEL
DIPS
DIPS
SIPS, Molded, Low Profile
SIPS, Molded, Low Profile
SIPS, Molded, Low Profile
SIPS, Molded, High Profile
SIPS, Molded, High Profile
SIPS, Molded, High Profile
SIPS, Coated
SIPS, Coated
SIPS, Coated
No. of Pins
14
16
6
8
10
6
8
10
2
3 thru 19
20
0.100 ± 0.005
[2.54 ± 0.127]
Non-Cumulative
0.018 ± 0.002
[0.457 ± 0.051]
A (Max.)
0.775 [19.69]
0.875 [22.23]
0.598 [15.19]
0.798 [20.27]
0.998 [25.35]
0.598 [15.19]
0.798 [20.27]
0.998 [25.35]
0.200 [5.08]
*
2.00 [50.80]
B (Max.)
0.190 [4.83]
0.190 [4.83]
0.192 [4.88]
0.192 [4.88]
0.192 [4.88]
0.340 [8.64]
0.340 [8.64]
0.340 [8.64]
0.200 [5.08]
*
*
C (Max.)
0.135 [3.43]
0.135 [3.43]
0.190 [4.83]
0.190 [4.83]
0.190 [4.83]
0.190 [4.83]
0.190 [4.83]
0.190 [4.83]
0.290 [7.37]
0.290 [7.37]
0.290 [7.37]
D (Max.)
0.088 [2.23]
0.088 [2.23]
0.088 [2.23]
0.088 [2.23]
0.088 [2.23]
0.088 [2.23]
0.100 [2.54]
*
*
* Depending on customer requirements.
ENVIRONMENTAL PERFORMANCE
TEST 1
Power Conditioning
Thermal Shock
Thermal Shock Group C
Short Time Overload
Low Temperature Storage
Low Temperature Operation
Low Temperature Exposure
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Load Life
(108)
(107)
(107)
(106)
(210)
(213)
(204)
(108)
Maximum ΔR (Typical Test Lots)
ΔR < 0.10 %
ΔR < 0.10 %
ΔR < 0.10 %
ΔR < 0.03 %
ΔR < 0.02 %
ΔR < 0.02 %
ΔR < 0.06 %
ΔR < 0.10 %
ΔR < 0.10 %
ΔR < 0.04 %
ΔR < 0.04 %
ΔR < 0.22 %
1. Numbers in parentheses refer to test method MIL-STD-202 as modified by the detail specification.
ORDERING INFORMATION
For custom product information contact factory at
+1-909-923-3313
www.vishay.com
22
For technical questions, contact: [email protected]
Document Number: 68009
Revision: 24-Jul-06
TSR
Vishay Techno
Surge Resistor SIP
Pair of Matched Resistors
APPLICATION
• Secondary protection for telecon line cards
• Lightning Protection to Bellcore GR-1089 and ITU-T K.20
• Optional version with thermal fuse
• Custom designs available
LIGHTNING SURGE TESTS
Bellcore Spec. GR-1089: 10 x 1000 µ seconds 1 kV
2 x 10 µ seconds 2.5 kV
ITU-T K.20: 10 x 700 µ seconds 2 kV
The TSR Surge Resistor from Vishay Techno is used to
protect sensitive components and circuits from the surges
introduced by lightning strikes and power cross conditions.
Power Cross Test: Per Bellcore Spec.
ELECTRICAL SPECIFICATIONS (Typical)
The proprietary Thick Film Technology used in the TSR can
dissipate a large amount of energy during a short transient
condition. These networks are designed to meet the
applicable requirement of Bellcore GR-1089 and ITU-T K.20.
The TSR is available in large quantities with a short
lead-time.
Resistance Values: 20 Ω to 200 Ω
Standard Values (R1 = R2): 24 Ω, 50 Ω, 100 Ω, 200 Ω
Resistance Tolerance:** 0.5 % STD
Ratio Tolerance:** 0.5 % STD
TCR:** 100 ppm/°C STD
SCHEMATICS
R1
Power Dissipation (per resistor) at 25 °C: 2 watts
R2
Pulse: 31 kw to 312 kw (Value dependent)
Temperature Range: - 55 °C to + 125 °C
7
1
13
19
** Contact applications engineering for tighter specifications.
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: TSR100RDDRB (preferred part number format)
T
S
R
1
0
0
R
D
GLOBAL MODEL
RESISTANCE VALUE
TOLERANCE
RATIO TOLERANCE
TSR
R = decimal
20R0 = 20 Ω
100R = 100 Ω
C = ± 0.25 %
D = ± 0.5 %
F= ±1%
C = ± 0.25 %
D = ± 0.5 %
F= ±1%
D
R
B
TERMINAL
FINISH
PACKAGING
R = Sn60/Pb40
B = Bulk
S = Strip
Historical Part Numbering: TSR100DD (will continue to be accepted)
TSR
100
D
D
HISTORICAL MODEL
RESISTANCE VALUE
TOLERANCE
RATIO TOLERANCE
Document Number: 68019
Revision: 26-Jul-06
For technical questions, contact: [email protected]
TERMINAL
FINISH
www.vishay.com
23
TSR
Surge Resistor SIP
Pair of Matched Resistors
Vishay Techno
ENVIRONMENTAL SPECIFICATIONS (typical)
MECHANICAL SPECIFICATIONS
Tests per MIL-STD-202
Type:
Ceramic SIP
Resistance to Solvents: No marking deterioration
Thick Film Element:
96 % Alumina
Resistance to Solder Heat: ± 0.5 % or 0.5 Ω
whichever is greater
Terminals:
Tinned copper alloy
Solderability: > 95 % coverage
MARKING
Insulation Resistance: 10 MΩ minimum (isolated pins)
- Complete Part Number
Bias Humidity Test: 50 Volts, 85 % Relative Humidity, 85 °C
- Manufacturer’s Name/Code
- Date Code
-
Pin #1 Identifier
DIMENSIONS in inches (millimeters)
0.100 MAX.
(2.54 MAX.)
BACK SIDE
2.000 ± 0.020
(50.8 ± 0.508)
0.500 MAX.
(12.7 MAX.)
(SEATING
PLANE)
0.010 ± 0.002
(0.254 ± 0.051)
www.vishay.com
24
MARKING AREA
1
0.090 MIN.
(2.286 MIN.)
0.130 MAX.
(3.302 MAX.)
7
13
0.020 ± 0.002
(0.508 ± 0.051)
19
0.600
(15.24) (3 PLACES)
For technical questions, contact: [email protected]
Document Number: 68019
Revision: 26-Jul-06
Custom Networks
Vishay Techno
Surface Mount DIPS
Small Outline
FEATURES
• Thick film resistive element
• NPO or X7R capacitors for line terminator
• Wide operating temperature range, - 55 °C to + 125 °C
• Surface mount "J" leads or Gull wing leads
CAPACITOR SPECIFICATIONS
SCHEMATICS
Model: NPO or X7R
Custom Resistor Network, DIP
16
15
R1
14
13
R2
R3
12
11
10
Size: 0805 - 1210
9
R4
R6
R5
R7
NPO Capacitance Range Standard: 1 pF - 0.56 µF, other
values available
X7R Capacitance Range: 330 pF - 0.027 µF, other values
available
Note: NPO capacitors may be substituted for X7R capacitors
1
2
3
4
5
6
7
8
Tolerance:
NPO Type = J ± 5 %, K ± 10 % standard
Custom R/C Network, DIP
16
15
14
13
12
R3
C2
1
2
3
11
10
9
Tighter tolerances available
Voltage Rating: 50 VDC, higher voltage available on
request
C1
R2
R1
X7R Type = K ± 10 %, M ± 20 % standard
4
5
R5
R4
DIMENSIONS
6
7
8
[Numbers in brackets indicate millimeters]
0.100 [2.54]
Typ.
RESISTOR SPECIFICATIONS
Resistance Range: 10 Ω to 10 MΩ. Other values available
on request
Resistance Tolerance: F = ± 1 %, G = ± 2 %, J = ± 5 %
standard, tighter tolerances available
Temperature Coefficient: (- 55 °C to + 125 °C)
± 100 ppm/°C standard, ± 50 ppm/°C available
Operating Voltage: 50 VDC maximum, higher voltage
available on request
0.050 [1.27]
Typ.
MECHANICAL SPECIFICATIONSS
ORDERING INFORMATION
Lead: "J" Lead/Gull wing available
NOTE: Parts will be covered with polymer, glass or ceramic lid
Document Number: 68005
Revision: 27-Jul-06
For custom product information contact factory at
+1-909-923-3313
For technical questions, contact: [email protected]
www.vishay.com
25
SMDD
Vishay Techno
SMT Precision Decade Resistor Voltage Divider
FEATURES
•
•
•
•
•
High voltage up to 1200 volts and over voltage to 2000 volts
5 decade voltage dividers with ratios from 10:1 to 10 000:1
Thick film resistor network
Excellent environmental stability (≤ 0.04 %/2000 hrs)
Custom Schematics Available
ELECTRICAL SPECIFICATIONS (typical)
DESCRIPTION
Resistance: R1 = 9 MΩ, R2 = 900 kΩ
R3 = 90 kΩ, R4 = 9 kΩ
R5 = 900 Ω
Resistance tolerance: ± 0.25 %
Ratio tolerance: ± 0.25 %
Absolute TCR: ± 40 ppm/°C
Ratio TCR: ± 40 ppm/°C
Absolute VCR: ± 10 ppm/V
Voltage coefficient of ratio: ± 3 ppm/V
Vishay has developed a standard product line of Thick Film
voltage dividers with excellent performance employing high
precision, high stability, low TCR and wide resistance range
coverage.
We are also well suited to develop many combinations of
custom ratio networks by devoting careful attention to the
individual customer’s requirements such as stability during
life and power handling capabilities.
MECHANICAL SPECIFICATIONS
SMT voltage dividers are robust and compact resistor
networks. They deliver higher performance compared to
selected discrete resistor sets and networks.
Lead: "J" lead/gull wing available
Size: 0.6" (15.33 mm) x 0.5" (12.7 mm) x 0.1" (2.7 mm)
ENVIROMENTAL SPECIFICATIONS (typical)
DIMENSIONS
A
B
R
D
C
Absolute % shift: 0.05 %
Ratio % shift: 0.03 %
Load life 2000 hours at 70 °C: 0.04 %
Over voltage (2000 V/10 SC): 0.01 %
Voltage rating: 1200 volts
L
J
E
I
G
F
SCHEMATIC
H
1
2
3
4
5
6
7
8
9
10
DIMENSIONS in inches (mm)
A
B
C
D
E
F
0.5
(12.7)
0.6
(15.33)
0.17
(4.3)
0.1
(2.7)
0.050
(1.27)
0.018
(0.46)
R5
R3
R4
R2
R1
SOLDER PAD DIMENSIONS in inches (mm)
G
H
I
J
K
L
0.050
(1.27)
0.450
(11.43)
0.200
(7.11)
0.418
(12.14)
0.028
(0.711)
0.085
(2.16)
20
19
18
17
16
15
14
13
12
11
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: SMDDJ9M00CGSB (preferred part number format)
S
GLOBAL
MODEL
SMDD
M
D
D
J
9
M
TERM STYLE
RESISTANCE
VALUE (R1)
TOLERANCE
J = J Lead
G = Gull Wing
M = Million
9M00 = 9 MΩ
C = ± 0.25 %
D = ± 0.5 %
F = ± 1.0 %
0
0
C
G
B
TERMINAL
FINISH
PACKAGING
S = Sn62/Pb36/Ag2
B = Bulk
TCR
G = 40 ppm
S
Historical Part Numbering: SMDDJ9M00CGSB (will continue to be accepted)
SMDD
J
9M00
C
G
S
B
HISTORICAL
MODEL
TERM
STYLE
RESISTANCE
VALUE (R1)
TOLERANCE
TCR
TERMINAL
FINISH
PACKAGING
www.vishay.com
26
For technical questions, contact: [email protected]
Document Number: 68021
Revision: 27-Jul-06
Custom Networks
Vishay Techno
Quads, Surface Mount R, RC, RCD
FEATURES
•
•
•
•
•
Thick film resistive elements
NPO or X7R capacitors for line terminator
Wide operating temperature range, - 55 °C to + 125 °C
TCR tracking = ± 50 ppm/°C
Surface mount "J" leads or Gull wing leads
CAPACITOR SPECIFICATIONS
Model: NPO or X7R
Size: 0805 - 1210
NPO Capacitance Range Standard: 1 pF - 0.56 µF, other
values available
X7R Capacitance Range: 330 pF - 0.027 µF, other values
available
Note: NPO capacitors may be substituted for X7R capacitors
Tolerance: NPO = J ± 5 %, K ± 10 % standard
X7R = K ± 10 %, M ± 20 % standard, tighter tolerances
available
Voltage Rating: 50 VDC, higher voltage available on
request
SCHEMATICS
Custom Resistor Quad
R10
R1
R8
R2
R5
R3
R4
R9
R6
R7
MECHANICAL SPECIFICATIONS
Lead: "J" Lead/Gull Wing available.
Standard Ceramic Size: 0.5" [12.7 mm] x 0.5" [12.7 mm],
0.75" [19.05 mm] x .75" [19.05 mm],
1.0" [25.4 mm] x 1.0" [25.4 mm],
1.25" [31.75 mm] x 1.25" [31.75 mm],
1.5" [38.1 mm] x 1.5" [38.1 mm]
Note: Parts will be covered with polymer, glass or ceramic lid.
Custom Resistor/Capacitor Quad
DIMENSIONS
R1
R2
R3
R4
R7
C3
R6
C1
C2
[Numbers in brackets indicate millimeters]
R5
RESISTOR SPECIFICATIONS
Resistance Range: 10 Ω to 10 MΩ, other values available
on request
Resistance Tolerance: F = ± 1 %, G = ± 2 %, J = ± 5 %
standard, tighter tolerances available
Temperature Coefficient: (- 55 °C to + 125 °C)
± 100 ppm/°C standard, ± 50 ppm/°C available
Operating Voltage: 50 VDC maximum. Higher voltage
available on request
Document Number: 68006
Revision: 27-Jul-06
0.050
[1.27]
Typ.
0.100
[2.54]
Typ.
ORDERING INFORMATION
For custom product information contact factory at
909-923-3313
For technical questions, contact: [email protected]
www.vishay.com
27
117S, 126S, 151S and 176S
Vishay Techno
3/8" [9.52 mm] Sq. Wirewound Trimmers
FEATURES
•
•
•
•
•
APPLICATIONS
Wirewound trimmers are particularly useful in those
applications where any combination of high power, low
temperature coefficient of resistance and/or excellent long
term life stability are important design considerations.
Precious metal wiper
1.0 watt to + 85 °C
TCR ± 50 ppm/°C
Solderable leads
Military quality at affordable prices
STANDARD RESISTANCE VALUES
RESISTANCE*
(Ω)
NOMINAL RESOLUTION
(%)
ELECTRICAL SPECIFICATIONS
10
1.10
Electrical Travel: 22 ± 4 turns
Resistance Range: 10 Ω to 10 kΩ
Extended range available in non MIL-Spec product
Resistance Tolerance: ± 5 % standard
Closer tolerances available
Temperature Coefficient: (- 65 °C to + 150 °C) ± 50 ppm/°C
Power Rating: 1.0 W at + 85 °C derated to 0 W at + 150 °C,
these specifications exceed MIL-Spec
End Resistance: 1 Ω or 2 %, whichever is greater
Equivalent Noise Resistance (ENR): 100 Ω maximum
Dielectric (DWV): 1000 VAC at atmospheric pressure
These specifications exceed MIL-Spec
Insulation Resistance: > 100 000 MΩ (500 VDC)
These specifications exceed MIL-Spec
20
0.85
50
0.65
100
0.51
200
0.40
500
0.45
1K
0.34
2K
0.27
5K
0.20
10K
0.16
20K
0.13
25K
0.12
35K
0.11
50K
0.10
ENVIRONMENTAL SPECIFICATIONS
* Other resistances available upon request
Temperature Limits: - 65 °C to + 150 °C
Sealing: Fully sealed case (non-hermetic)
MECHANICAL SPECIFICATIONS
CIRCUIT DIAGRAM
Operating Torque: 5 ounce inch maximum
Rotation: Clutch stop, wiper idles
Weight: 0.935 grams maximum
Resistive Element: Nickel chromium
Rotational Life: 200 cycles minimum
Terminal Strength: 2 pounds for 10 seconds
1
CW
3
2
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: 117S500RB (preferred part number format)
1
1
7
S
5
0
0
R
B
GLOBAL MODEL
TYPE
RESISTANCE VALUE
PACKAGING
117 = Teflon Leadwire
126 = PC Mount
151 = Top Adjustment Screw
176 = Side Adjustment Screw
/ = Continuous Rotation
S = Clutch Stop
R = Decimal
K = Thousand
100R = 100 Ω
5K00 = 5 kΩ
B = Bulk
Historical Part Numbering: 117s501 (will continue to be accepted)
117
s
501
HISTORICAL MODEL
TYPE
RESISTANCE VALUE
www.vishay.com
28
For technical questions, contact: [email protected]
Document Number: 68016
Revision: 24-Jul-06
117S, 126S, 151S and 176S
3/8" [9.52 mm] Sq. Wirewound Trimmers
Vishay Techno
DIMENSIONS 3/8" [9.52 mm] Square in inches [millimeters]
0.040 ± 0.010
[1.02 ± 0.254]
0.419 ± 0.010
[10.64 ± 0.254]
0.075 ± 0.010
[1.90 ± 0.254]
Radius
Y
0.117 ± 0.005
[2.97 ± 0.127]
0.023 ± 0.003
[0.584 ± 0.076]
R
0.023 ± 0.003
[0.584 ± 0.076]
0.314 ± 0.005
[7.98 ± 0.127]
0.060 ± 0.005
[1.52 ± 0.127]
Dia.
0.150 ± 0.010
[3.81 ± 0.254]
0.313 ± 0.005
[7.95 ± 0.127]
#30 AWG leads, color coded
Teflon insulated
6" [152.40 mm] minimum length
W Lead Style - 151S
3
0.100 ± 0.005
[2.54 ± 0.127]
0.025 ± 0.003
[0.635 ± 0.076]
0.100 ± 0.005
[2.54 ± 0.127]
0.217 ± 0.005
[5.51 ± 0.127]
0.167 ± 0.005
[4.24 ± 0.127]
0.093 ± 0.005
[2.36 ± 0.127]
Dia.
1
0.375 ± 0.005
[9.52 ± 0.127]
X
0.300 [7.62]
Min.
0.027 ± 0.002
[0.686 ± 0.051]
Dia.
X Lead Style - 176S
0.314 ± 0.005
[7.98 ± 0.127]
0.190 ± 0.005
[4.83 ± 0.127]
0.025 ± 0.003
[0.635± 0.076]
0.093 ± 0.005
[2.36 ± 0.127]
Dia.
0.023 ± 0.003
[0.584 ± 0.076]
0.410 ± 0.010
[10.41 ± 0.254]
0.040 ± 0.005
[1.02 ± 0.127]
0.190 ± 0.005
[4.83 ± 0.127]
0.139 ± 0.005
[3.53 ± 0.127]
0.040 ± 0.005
[1.02 ± 0.127]
0.023 ± 0.003
[0.584 ± 0.076]
2
0.055 ± 0.005
[1.40 ± 0.127]
X
0.380 ± 0.005 G
[9.65 ± 0.127] CW
0.375 ± 0.005
[9.52 ± 0.127]
P Lead Style - 126S
L Lead Style - 117S
0.025 ± 0.003
[0.635 ± 0.076]
0.346 ± 0.005
[8.79 ± 0.127]
0.093 ± 0.005
[2.36 ± 0.127]
Dia.
0.375 ± 0.005
[9.52 ± 0.127]
3 2 1
0.300 [7.62]
Min.
0.027 ± 0.002
[0.686± 0.051]
Dia.
0.100 ± 0.005
[2.54 ± 0.127]
0.410 ± 0.005
[10.41 ± 0.127]
3 2 1
0.300 [7.62]
Min.
0.023 ± 0.003
[0.584 ± 0.076]
0.100 ± 0.005
[2.54 ± 0.127]
0.100 ± 0.005
[2.54 ± 0.127]
0.375 ± 0.005
[9.52 ± 0.127]
0.027 ± 0.002
[0.686 ± 0.051]
Dia.
0.100 ± 0.005
[2.54 ± 0.127]
0.139 ± 0.005
[3.53 ± 0.127]
ENVIRONMENTAL PERFORMANCE
Power Conditioning
Thermal Shock
Low Temperature Storage
Low Temperature Operation
High Temperature Exposure
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Rotational Life
Load Life
CONDITIONS
(108) 50 hours at 1 watt at + 25 °C
(107) 5 cycles, - 55 °C to + 125 °C
72 hours, no load at - 65 °C
1 hour storage, 45 minutes rated power at - 55 °C
1000 hours, no load at + 150 °C
480 hours at rated power with humidity ranging
(106)
from 80 % RH to 98 % RH
(210) + 350 °C for 3 seconds
(213) 18 shocks, 100 g, 6 ms, sawtooth, 3 axes
(204) 10 to 2000 Hz, 20 g, 12 hours, 3 axes
200 cycles
(108) 10 000 hours at rated power at + 85 °C
1. Numbers in parenthesis refer to test method MIL-STD-202 as
modified by the detail specification.
2. For values below 100 Ω, add 0.05 Ω to the allowable change.
3. The referenced tests also require that setting stability change
shall not exceed ± 0.05 percent plus the specified maximum
resolution.
MIL-PRF-39015
REQUIREMENT
ΔR ≤ 0.5 % 2)
ΔR ≤ 1.0 % 2)
ΔR ≤ 1.0 % 2)
ΔR ≤ 1.0 % 2),3)
ΔR ≤ 1.0 % 2),3)
TYPICAL
CHANGE
ΔR < 0.08 %
ΔR < 0.07 %
ΔR < 0.05 %
ΔR < 0.08 %
ΔR < 0.03 %
ΔR ≤ 1.0 % 2)
ΔR < 0.22 %
ΔR ≤ 1.0 % 2)
ΔR ≤ 1.0 % 2),3)
ΔR ≤ 1.0 % 2),3)
ΔR ≤ 2.0 %
ΔR ≤ 3.0 %
ΔR < 0.02 %
ΔR < 0.27 %
ΔR < 0.04 %
ΔR < 0.06 %
ΔR < 0.23 %
DERATING
1.00
WATTS
TEST 1)
0.80
0.60
0.40
0.20
0
Document Number: 68016
Revision: 24-Jul-06
25
50
75 85 100 125 150 175
AMBIENT TEMP. DEG. CENTIGRADE
For technical questions, contact: [email protected]
www.vishay.com
29
12S, 14S, 15S, 17S, 18S
Vishay Techno
1/4" [6.35 mm] Sq. Wirewound Trimmers
FEATURES
•
•
•
•
•
•
APPLICATIONS
Precious metal wiper
0.25 W to + 85 °C
TCR < 50 ppm/°C
Solderable leads
Special configurations available
Military quality at affordable prices
ENVIRONMENTAL SPECIFICATIONS
Wirewound trimmers are particularly useful in those
applications where any combination of high power, low
temperature coefficient of resistance and/or excellent long
term life stability are important design considerations.
Temperature Limits: - 65 °C to + 175 °C
Sealing: Fully sealed case (non-hermetic)
STANDARD RESISTANCE VALUES
ELECTRICAL SPECIFICATIONS
Electrical Travel: 22 ± 4 turns
Resistance Range: 10 Ω to 5 kΩ
Extended range available in non MIL-Spec product
Resistance Tolerance: ± 5 % standard
Closer tolerances available
Temperature Coefficient: (- 65 °C to + 150 °C) ± 50 ppm/°C
Power Rating: 0.5 W at + 85 °C derated to 0 W at + 150 °C
These specifications exceed MIL-Spec
End Resistance: 1 Ω or 2 %, whichever is greater
Equivalent Noise Resistance (ENR): 100 Ω maximum
Dielectric (DWV): 1000 VAC at atmospheric pressure
These specifications exceed MIL-Spec
Insulation Resistance: > 100 000 MΩ (500 VDC)
These specifications exceed MIL-Spec
MECHANICAL SPECIFICATIONS
RESISTANCE*
(Ω)
NOMINAL RESOLUTION
(%)
10
1.65
20
1.35
50
1.13
100
0.82
200
0.62
500
0.62
1K
0.49
2K
0.34
5K
0.27
10K
0.21
20K
0.17
25K
0.16
* Other resistances available upon request
Operating Torque: 3 ounce inch maximum, 17S and 18S,
5 ounce inch maximum, 12S, 14S and 15S
Rotation: Clutch stop, wiper idles
Weight: 0.935 grams maximum
Resistive Element: Nickel chromium
Rotational Life: 200 cycles minimum
Terminal Strength: 2 pounds for 10 seconds
CIRCUIT DIAGRAM
1
3
CW
2
GLOBAL PART NUMBER INFORMATION
New Global Part Numbering: 12S500RB (preferred part number format)
1
2
S
5
0
0
R
B
GLOBAL MODEL
TYPE
RESISTANCE VALUE
PACKAGING
12 = Top Adjustment Screw
14 = Side Adjustment Screw
15 = PC Mount
17 = Top Adjustment Screw
18 = Side Adjustment Screw
/ = Continuous Rotation
S = Clutch Stop
R = Decimal
K = Thousand
100R = 100 Ω
5K00 = 5 kΩ
B = Bulk
Historical Part Numbering: 12s501 (will continue to be accepted)
12
s
501
HISTORICAL MODEL
TYPE
RESISTANCE VALUE
www.vishay.com
30
For technical questions, contact: [email protected]
Document Number: 68017
Revision: 24-Jul-05
12S, 14S, 15S, 17S, 18S
1/4" [6.35 mm] Sq. Wirewound Trimmers
Vishay Techno
DIMENSIONS 1/4" [6.35 mm] Square in inches [millimeters]
X Lead Style - 18S
W Lead Style - 17S
0.030 ± 0.010
[0.762 ± 0.254]
0.038 ± 0.005
[0.965 ± 0.127]
0.020 ± 0.003
[0.508 ± 0.076]
0.020 ± 0.003
[0.508 ± 0.076]
1 2 3
0.016 ± 0.001
[0.406 ± 0.025]
Dia.
0.211 ± 0.005
[5.36 ± 0.127]
0.172 [4.37]
Min.
0.160 ± 0.010
[4.06 ± 0.254]
0.120 ± 0.005
[3.05 ± 0.127]
0.020 ± 0.003
[0.508 ± 0.076]
0.120 ± 0.005
[3.05 ± 0.127]
0.030 ± 0.010
[0.762 ± 0.254]
0.038 ± 0.005
[0.965 ± 0.127]
0.062 ± 0.005
[1.57± 0.127]
Dia.
0.100 ± 0.005
[2.54 ± 0.127]
0.100 ± 0.005
[2.54 ± 0.127]
P Lead Style - 15S
W Lead Style - 12S
0.180 ± 0.015
[4.57 ± 0.381]
0.062 ± 0.002
[1.57 ± 0.051]
Dia.
0.211 ± 0.005
[5.36 ± 0.127]
0.062 ± 0.005
[1.57 ± 0.127]
0.172 [4.37]
Min.
0.100 ± 0.005
[2.54 ± 0.127]
0.260 ± 0.005
[6.60 ± 0.127]
0.160 ± 0.010
[0.406 ± 0.254]
0.020 ± 0.003
[0.508 ± 0.076]
0.260 ± 0.005
[6.60 ± 0.127]
0.100 ± 0.005
[2.54 ± 0.127]
0.045 ± 0.005
[1.14 ± 0.127]
0.016 ± 0.001
[0.406 ± 0.025]
Dia.
0.045 ± 0.005
[1.14 ± 0.127]
0.156 ± 0.010
[3.96 ± 0.254]
0.020 ± 0.0015
[0.508± 0.038]
Dia.
0.014 [0.356]
Min.
0.020
[0.508]
0.156
[3.96]
1.72
[4.37]
Min.
1
0.082
[2.08]
3
2
0.125
[3.17]
X Lead Style - 14S
0.062 ± 0.002
[1.57 ± 0.051]
Dia.
0.014 [0.356]
Min.
0.020
[0.508]
0.156 ± 0.010
[3.96 ± 0.254]
0.172
[4.37]
Min.
0.100
[2.54]
0.038
[0.965]
0.014 [0.356]
Min.
0.250 ± 0.015
[6.35 ± 0.381]
0.120 ± 0.010
[3.05 ± 0.254]
1
2
3
0.020
[0.508]
0.100
[2.54]
0.050 ± 0.010
[1.27 ± 0.254]
0.250 ± 0.015
[6.35 ± 0.381] 0.013 ± 0.001
[0.330 ± 0.025]
Dia.
0.050 ± 0.010
0.062 ± 0.002 [1.27 ± 0.254]
[1.57 ± 0.051]
Dia.
0.250 ± 0.015
[6.35 ± 0.381]
0.055 ± 0.010
[1.40 ± 0.254]
0.050 ± 0.010
[1.27 ± 0.254]
0.120 ± 0.010
[3.05 ± 0.254]
0.100
[2.54]
0.210
[5.33]
0.013 ± 0.001
[0.330 ± 0.025]
Dia.
0.172 [4.37]
Min.
3
2
1
0.100
[2.54]
0.038
[0.965]
ENVIRONMENTAL PERFORMANCE
Thermal Shock
Low Temperature Operation
High Temperature Exposure
Moisture Resistance
Resistance to Soldering Heat
Shock
Vibration
Rotational Life
Load Life
CONDITIONS
(107) 5 cycles, - 55 °C to + 125 °C
1 hour storage, 45 minutes rated power at - 55 °C
250 hours, no load at + 150 °C
240 hours at rated power with humidity ranging
(106)
from 80 % RH to 98 % RH
(210) + 350 °C for 3 seconds
(213) 18 shocks, 100 g, 6 ms, sawtooth, 3 axes
(204) 10 to 2000 Hz, 20 g, 12 hours, 3 axes
200 cycles
(108) 1000 hours at rated power at + 85 °C
1. Numbers in parenthesis refer to test method MIL-STD-202 as
modified by the detail specification.
2. For values below 100 Ω, add 0.05 ohm to the allowable change.
3. The referenced tests also require that setting stability change
shall not exceed ± 1.0 percent plus the specified maximum
resolution and operating torque shall not exceed 150 % of the
specified maximum.
MIL-R-27208
REQUIREMENT
ΔR ≤ 1.0 % 2)
ΔR ≤ 1.0 % 2),3)
ΔR ≤ 1.0 % 2),3)
TYPICAL
CHANGE
ΔR < 0.02 %
ΔR < 0.01 %
ΔR < 0.03 %
ΔR ≤ 1.0 % 2)
ΔR < 0.02 %
ΔR ≤ 1.0 %
ΔR ≤ 1.0 % 2),3)
ΔR ≤ 1.0 % 2),3)
ΔR ≤ 2.0 %
ΔR ≤ 2.0 %
ΔR < 0.01 %
ΔR < 0.07 %
ΔR < 0.02 %
ΔR < 0.04 %
ΔR < 0.12 %
2)
DERATING
0.50
WATTS
TEST 1)
0.40
0.30
0.20
0.10
0
Document Number: 68017
Revision: 24-Jul-05
25
50
75 85 100 125 150 175
AMBIENT TEMP. DEG. CENTIGRADE
For technical questions, contact: [email protected]
www.vishay.com
31
Notes
Vishay Techno
www.vishay.com
32
For technical questions, contact: [email protected]
Revision 18-Aug-06
Notes
Vishay Techno
For technical questions, contact: [email protected]
Revision: 18-Aug-06
www.vishay.com
33
Notes
Vishay Techno
www.vishay.com
34
For technical questions, contact: [email protected]
Revision 18-Aug-06
Online Information
For product information and current list of sales offices,
representatives and distributors, visit our website:
Worldwide Sales Contacts
www.vishay.com
The Americas
EUROPE
United States
Germany
Vishay Americas
One Greenwich Place
Shelton, CT 06484
United States
Ph: +1-402-563-6866
Fax: +1-402-563-6296
Vishay EUROPE SALES GmbH
Geheimrat-Rosenthal-Str. 100
95100 Selb
Germany
Ph: +49-9287-71-0
Fax: +49-9287-70435
Asia
France
Singapore
Vishay S.A.
199, BLVD DE LA MADELEINE
06003 NICE, CEDEX 1
France
Ph: +33-4-9337-2920
Fax: +33-4-9337-2997
Vishay intertechnology
Asia Pte Ltd.
25 Tampines Street 92
Keppel Building #02-00
Singapore 528877
Ph: +65-6788-6668
Fax: +65-6788-0988
Netherlands
P.R.C.
Vishay Trading (Shanghai) Co., Ltd.
(SHANGHAI REPRESENTATIVE OFFICE)
ROOM D, 15F, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
200030 SHANGHAI
P.R.C.
PH: +86-21-5258-5000
FAX: +86-21-5258-7979
Vishay BCCOMPONENTS B.V.
HURKESTRAAT 31
P.O. BOX 8766
5652 AH EINDHOVEN
NETHERLANDS
Ph: +31-40-2590-700
Fax: +31-40-2590-777
Japan
vishay japan CO., LTD.
Shibuya 3-chome Square Building 3F
3-5-16 Shibuya
Shibuya-Ku
Tokyo 150-0002
Japan
Ph: +81-3-5464-6411
fax: +81-3-5464-6433
One of the World’s Largest
Manufacturers
of Discrete Semiconductors and Passive Components
THICK FILM PRODUCTS
One of the World’s Largest
Manufacturers
of Discrete Semiconductors and Passive Components
D ata B ook
World Headquarters
63 Lancaster Avenue
Malvern, PA 19355-2143
United States
© Copyright Vishay Intertechnology, Inc.
Registered Trademarks of Vishay Intertechnology, Inc.
All rights reserved. Printed in Germany.
Specifications subject to change without notice.
w w w. v i s h a y. c o m
VSE-DB0003-0608