T12, T13 www.vishay.com Vishay Sfernice Fully Sealed Container 12 mm Square or Round Cermet Trimmer FEATURES • Military and professional grade • High power rating (1 W at 70 °C) • Tests according to CECC 41000 or IEC 60393-1 • High stability (1 % typical) • Mechanical strength • Hermetic sealing of the case • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The Vishay SFERNICE trimming potentiometers T12 and T13 fully meet the requirements of CECC 41 100. The use of a cermet track combined with sealing of the case provides unique characteristics and performances. T12 and T13 have been specially designed for mounting on printed circuit board. DIMENSIONS in millimeters (± 0.5 mm) T12X - PM06X 9.5 ± 0.5 T13Y 12 ± 0.5 1.5 0.8 Ø3 0.3 Ø3 a c 13 ± 0.5 5.08 7 ± 0.2 Base Level b 3.8 min 4.5 min 0.75 0.4 Ø 12.6 ± 0.1 T12Y - PM06Y 4.5 min 10 ± 0.5 2 5.08 1.5 ± 0.5 TERMINAL SPACING ON THE PCB Drilling Diameter: 1.2 mm 0.4 T12Y 0. 9 T12X 5.08 4 0. 5.08 10.16 10.16 ø3 1.5 0.75 a b c 5.08 5.08 c b a 5.08 5.08 10 ± 0.5 LOCKING DEVICE: T12XB-YB Base Level 5 min 4.5 6 × 6 nut with slots M3 × 0.50 12 ± 0.5 12 ± 0.5 4 ± 0.5 Revision: 23-Sep-15 Document Number: 51022 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T12, T13 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 270° ± 10° 22 to 10 M Resistance range Standard series E3 Tolerance Power rating 1 - 2.2 - 4.7 and on request 1 - 2 - 5 standard ± 20 % on request ± 10 %, ± 5 % linear 1 W at 70 °C logarithmic 0.5 W at 70 °C LIN. LAW “A” Power rating chart POWER IN W 1 LOG. LAWS “L” and “F” 0.5 0 0 40 20 70 60 80 125 100 140 AMBIENT TEMPERATURE IN °C c a (1) Circuit diagram (3) b (2) cw 100 Resistance laws % TOTAL RESISTANCE 80 60 F A 40 L 20 0 0 20 40 60 80 100 % CLOCKWISE SHAFT ROTATION Temperature coefficient Limiting element voltage (linear law) Contact resistance variation End resistance (typical) See Standard Resistance Element Table 350 V 3 % Rn or 3 1 Dielectric strength (RMS) 1000 V Insulation resistance (500 VDC) 106 M Revision: 23-Sep-15 Document Number: 51022 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T12, T13 www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATIONS Mechanical travel 300° ± 5° Operating torque (max. Ncm) 3 End stop torque (max. Ncm) 15 Unit weight (max. g) 4.7 Terminals Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range -55 °C to +125 °C Climatic category 55/100/56 IP67 Fully sealed Sealing PERFORMANCES TYPICAL VALUES AND DRIFTS TESTS Load life Climatic sequence Long term damp heat Rapid temperature change Shock Vibration Rotational life CONDITIONS RT/RT (%) R1-2/R1-2 (%) 1000 h at rated power 90’/30’ - ambient temperature 70 °C ±1% Contact res. variation: < 2 % Rn ±2% Phase A dry heat 100 °C Phase B damp heat Phase C cold -55 °C Phase D damp heat 5 cycles ± 0.5 % ±1% 56 days 40 °C, 93 % RH ± 0.5 % Dielectric strength: 1000 VRMS Insulation resistance: > 104 M ±1% 5 cycles -55 °C to +125 °C ± 0.5 % V1-2/V1-3 ±1% 50 g at 11 ms 3 successive shocks in 3 directions ± 0.1 % ± 0.5 % 10 Hz to 55 Hz 0.75 mm or 10 g during 6 h ± 0.1 % V1-2/V1-3 ± 0.5 % 200 cycles ±1% Contact res. variation: < 2 % Rn Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 23-Sep-15 Document Number: 51022 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T12, T13 www.vishay.com Vishay Sfernice STANDARD RESISTANCE ELEMENT DATA LINEAR LAW STANDARD RESISTANCE VALUES MAX. POWER AT 70 °C W 22 1 LOG LAWS MAX. CURRENT THROUGH WIPER MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. CURRENT THROUGH WIPER TYPICAL TCR -55 °C to +125 °C V mA W V mA ppm/°C 4.69 213.2 MAX. WORKING VOLTAGE 47 1 6.85 145.8 100 1 10 100 220 1 14.8 67.4 470 1 21.6 46.1 1K 1 31.6 31.6 0.5 22.4 22.4 2.2K 1 46.9 21.3 0.5 33.2 15.1 4.7K 1 68.5 14.5 0.5 48.5 10.3 10K 1 100 10 0.5 79.7 7.07 22K 1 148.3 6.7 0.5 105 4.77 47K 1 216.7 4.6 0.5 153 3.26 100K 1 316.2 3.16 0.5 224 2.24 220K 0.56 350 1.59 0.5 332 1.51 470K 0.26 350 0.75 0.26 350 0.74 1M 0.12 350 0.35 0.12 350 0.35 2.2M 0.05 350 0.16 4.7M 0.02 350 0.07 10M 0.01 350 0.03 ± 100 MARKING • • • • • • Vishay trademark Model Ohmic value (in , k, M) Tolerance (in %) Manufacturing date Marking of terminal: 1, 2, 3 PACKAGING • For T13Y: In plastic box of 50 pieces, code B25 (BL50) • For T12Y, T12X: In carton box of 50 pieces, code B25 (BO50) Revision: 23-Sep-15 Document Number: 51022 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T12, T13 www.vishay.com Vishay Sfernice ORDERING INFORMATION FOR T12 (part number) T 1 2 X B 2 2 3 M A B 2 5 MODEL STYLE OPTION OHMIC VALUE TOLERANCE TAPER PACKAGING CODE SPECIAL NUMBER T12 X Y B = locking shaft 0 = without From 22 to 10 M 103 = 10 k M = 20 % On request: K = 10 % J=5% A L F B25 = box 50 pieces (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) T12 X B 22K 20 % A MODEL STYLE SPECIAL VALUE TOLERANCE TAPER BO SPECIAL e3 PACKAGING SPECIAL SHAFT LEAD FINISH ORDERING INFORMATION FOR T13 (part number) T 1 3 Y 1 0 5 M A B 2 5 MODEL STYLE OHMIC VALUE TOLERANCE TAPER PACKAGING CODE SPECIAL NUMBER T13 Y From 22 to 10 M 103 = 10 k M = 20 % On request: K = 10 % A L F B25 = box 50 pieces (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) T13 Y 1M 20 % A MODEL STYLE VALUE TOLERANCE TAPER SPECIAL BL50 e3 PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 23-Sep-15 Document Number: 51022 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000