TS6 www.vishay.com Vishay Sfernice Multi-Turn Surface Mount 1/4" Square Cermet Trimmers, Fully Sealed FEATURES • 0.25 W at 70 °C • Military and professional grade • Multi-turn operation • A low contact resistance variation (down to 2 % Rn) • Low end contact resistance (1 typical) • Full sealing • Tests according to CECC 41000 or IEC 60393-1 Three variations are available according to the positioning of the control screw and contact positions. • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 The TS6 multi-turn trimmer has been designed for use in PCB surface mounting applications. The cermet track gives a high stability performance with an extended ohmic capacity of 10 to 2 M. DIMENSIONS in millimeters (± 0.5 mm) RECOMMENDED SOLDERING AREAS TS6X Slot 0.5 x 0.5 0.25 5.8 ± 0.10 5 max. Ø 1.8 c 1 1 ± 0.10 0.7 b 2.54 c Ø 0.45 b 2.54 2.54 a 6.85 max. 2.54 3 7.5 6.7 max. 0.20 6.85 max. TS6Z 6.85 max. Slot 0.5 x 0.5 0.25 6.85 max. Ø 1.8 1.3 ± 0.1 7.6 max. Ø 0.45 3 5 max. b 9.3 1 ± 0.1 8.85 max. a c 1 5.3 max. 2.54 2.54 2.54 2.54 b a Ø 0.45 1.3 ± 0.1 c 0.3 2.54 2.54 Slot 0.5 x 0.5 Ø 1.8 1 ± 0.10 2.54 5 max. 6.85 max. 6.85 max. 6.85 max. TS6Y 6.7 max. c b a 2.54 1 3 7.5 8 max. Revision: 22-Sep-15 Document Number: 51010 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TS6 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 14 turns ± 2 10 to 2 M Resistance range Standard series E3 Tolerance 1 - 2.2 - 4.7 and on request 1 - 2 - 5 Standard ± 10 % On request ±5% Power rating 0.25 W at 70 °C RATED POWER IN W Linear 0.25 0.125 0 0 50 70 100 AMBIENT TEMPERATURE IN °C c a Circuit diagram (3) (1) cw b (2) Temperature coefficient 155 See Standard Resistance Element table Limiting element voltage (linear law) 250 V 2 % Rn or 2 Contact resistance variation 1 End resistance (typical) Dielectric strength (RMS) 1000 V Insulation resistance 106 M MECHANICAL SPECIFICATIONS Mechanical travel 15 turns ± 5 Operating torque (max. Ncm) 1.5 End stop torque Clutch action Net weight (max. g) 0.5 Wiper (actual travel) Positioned at approx. 50 % ENVIRONMENTAL SPECIFICATIONS Temperature range Climatic category Sealing MSL level -55 °C to +155 °C 55/125/56 Fully sealed IP67 1 SOLDERING RECOMMENDATIONS Recommended reflow profile 2, see Application Note www.vishay.com/doc?52029 Revision: 22-Sep-15 Document Number: 51010 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TS6 www.vishay.com Vishay Sfernice PERFORMANCES REQUIREMENTS TESTS CONDITIONS RT/RT (%) R1-2/R1-2 (%) Electrical endurance 1000 h at rated power 90'/30' - ambient temp. 70 °C ±2% ±4% Climatic sequence Phase A dry heat 125 °C Phase B damp heat Phase C cold -55 °C Phase D damp heat 5 cycles ±2% ±3% TYPICAL VALUES AND DRIFTS OTHER Contact res. variation: < 3 % Rn RT/RT (%) R1-2/R1-2 (%) OTHER ±1% ±2% Contact res. variation: < 1 % Rn ± 0.5 % ±1% Dielectric strength: 250 VRMS Insulation resistance: > 100 M ± 0.5 % Dielectric strength: 1000 VRMS Insulation resistance: > 104 M Damp heat steady state 40 °C 93 % RH 56 days ±2% Charge of temperature -55 °C to +125 °C 5 cycles ± 1.5 % V1-2/V1-3 ±2% ± 0.5 % V1-2/V1-3 <±1% Mechanical endurance 200 cycles at rated power ±2% Contact res. variation: < 3 % Rn ± (2 % + 3 ) Contact res. variation: < 1 % Rn 50 g at 11 ms 3 successive shocks in 3 directions ±1% V1-2/V1-3 ±2% ± 0.1 % V1-2/V1-3 0.2 % 10 Hz to 55 Hz 0.75 mm or 10 g for 6 h ±1% V1-2/V1-3 ±2% ± 0.1 % V1-2/V1-3 ± 0.2 % Shock Vibration ±3% ±1% Note • Nothing stated herein shall be construed as a guarantee of quality or durability. STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW MAX. POWER AT 70 °C MAX. WORKING VOLTAGE MAX. WIPER CURRENT TYPICAL TCR -55 °C +125 °C ppm/°C W V mA 10 0.25 158 158 22 0.25 2.34 107 47 0.25 3.43 73 100 0.25 5.00 50 220 0.25 7.42 34 470 0.25 10.8 23 1K 0.25 15.8 15.8 2.2K 0.25 23.4 10.7 4.7K 0.25 34.3 7.3 10K 0.25 50 5 22K 0.25 74.2 3.37 47K 0.25 108.4 2.31 100K 0.25 158 1.58 220K 0.25 234 1.97 470K 0.13 250 0.53 1M 0.06 250 0.25 2M 0.03 250 0.125 Revision: 22-Sep-15 ± 100 Document Number: 51010 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TS6 www.vishay.com Vishay Sfernice MARKING Printed: Vishay trademark, model, style, ohmic value (in , k, M), tolerance (in %) only if non standard, manufacturing date, marking of terminal 3. PACKAGING • In tube of 50 pieces code T20 (TU50) • In reel of 500 pieces code R10 (TR500) ORDERING INFORMATION (part number) T S 6 Y 4 7 4 K R 1 0 MODEL STYLE OHMIC VALUE TOLERANCE PACKAGING SPECIAL NUMBER TS6 X Y Z From 10 to 2 M 474 = 470 k K = 10 % On request J=5% T20 = tube 50 pieces On request R10 = reel 500 pieces (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) TS6 Y 470K 10 % MODEL STYLE VALUE TOLERANCE SPECIAL TU e3 PACKAGING LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 22-Sep-15 Document Number: 51010 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000