Low VF SMD Bridge Rectifiers Z4DGP406L-HF Thru. Z4DGP410L-HF Reverse Voltage: 600 to 1000 Volts Forward Current: 4.0 A RoHS Device Halogen free Z4-D Top View Bottom View 0.323(8.20) 0.315(8.00) Features 0.323(8.20) 0.315(8.00) 0.085(2.15) 0.073(1.85) - Intermal structure with GPRC (Glass passivated rectifier chip) inside. 0.417(10.60) 0.409(10.40) 0.146(3.70) 0.138(3.50) - Lead less chip form, no lead damage. 0.091(2.30) 0.083(2.10) - Low power loss, High efficiency. R0.7 0.091(2.30) 0.083(2.10) - High current capability. - Plastic package has Underwriters Laboratory Flammability Classification 94V-0 . 0.085(2.15) 0.073(1.85) 0.146(3.70) 0.138(3.50) Mechanical data 0.061(1.55) 0.049(1.25) Dimensions in inches and (millimeter) - Case: Packed with FRP substrate and epoxy underfilled. Circuit Diagram - Terminals: Pure Tin plated (Lead-Free), - solderable per MIL-STD-750, method 2026. 4 1 - + ~ ~ 3 2 - Polarity: Laser marking symbols - Weight: 0.29 grams (approx). Abolute Maximum Rating (at T =25°C unless otherwise noted) A Symbol Z4DGP406L-HF Z4DGP408L-HF Z4DGP410L-HF Unit Repetitive Peak Reverse Voltage VRRM 600 800 1000 V Average Forward Current I(AV) 4.0 A Peak Forward Surge Current, 8.3mS single half sine-wave, superimposed on rated load (JEDEC Method) IFSM 150 A TJ -55 to +175 °C TSTG -55 to +175 °C Parameter Operating Junction Temperature Range Storage Temperature Range Electrical Characteristics (at T =25°C unless otherwise noted) A Parameter Forward Voltage Repetitive peak reverse current Symbol VF IRRM Min. Typ. Max. Unit IF = 2.0A IF = 4.0A - 0.86 0.90 0.90 0.95 V VR=Max. VRRM, Ta=25°C - 0.08 5 μA Conditions 2 Current squared time It t<8.3ms, Ta = 25°C - 93.38 - A S Junction capacitance CJ VR=4V, f=1.0MHz - 45 - pF Junction to ambient (Note) - 35 - °C/W Junction to lead (Note) - 15 - °C/W 2 Rth(JA) Thermal resistance Rth(JL) Notes: 1. Thermal resistance, junction to ambient,measured on PC board with 5.0*5.0mm (0.03mm thick) land areas. Company reserves the right to improve product design , functions and reliability without notice. REV: B Page 1 QW-JBR06 Comchip Technology CO., LTD. Low VF SMD Bridge Rectifiers RATING AND CHARACTERISTIC CURVES (Z4DGP406L-HF Thru. Z4DGP410L-HF) Fig.2 - Maximum Non-Repetitive Peak Forward Surge Current 5.0 200 Peak forward surge current, (A) Average Forward Rectified Current, (A) Fig.1 - Forward Current Derating Curve 4.0 3.0 2.0 1.0 60Hz resistive or inductive load 0 0 25 50 75 100 125 150 100 50 1 10 100 Ambient Temperature, (°C) Number Of Cycles At 60Hz Fig.3 - Typical Instantaneous Forward Characteristics Fig.4 - Typical Reverse Characteristics Per Bridge Element 100 Instantaneous Reverse Current, (μA) Instantaneous Forward Current, (A) 150 0 175 10 TJ=25°C 1.0 0.1 0.01 Pulse width 8.3ms Single Half-Sire-Wave 10 TJ=100°C 1.0 TJ=25°C 0.1 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.3 0 20 40 60 80 100 120 140 Percent of Rated Peak Reverse Voltage (%) Instantaneous Forward Voltage, (V) Fig.5 - Typical Junction Capacitance Junction Capacitance, (pF) 100 10 TJ=25°C f=1.0MHz Vsig=50mVP-P 1 0.1 1 10 100 Reverse Voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV: B Page 2 QW-JBR06 Comchip Technology CO., LTD. Low VF SMD Bridge Rectifiers Reel Taping Specification d P0 P1 - + ~ ~ T E Index hole F W B P C A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 10 pitches (min) Start 10 pitches (min) Direction of Feed Z4-D Z4-D SYMBOL A B C d D D1 D2 (mm) 8.25 ± 0.10 10.65 ± 0.10 1.60 ± 0.10 1.55 ± 0.05 330 ± 2.00 50.0 MIN. 13.0 ± 0.50 (inch) 0.325 ± 0.004 0.419 ± 0.004 0.063 ± 0.004 0.061 ± 0.002 12.992 ± 0.079 1.969 MIN. 0.512 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 7.50 ± 0.10 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 16.00 ± 0.30 14.4 MAX. (inch) 0.069 ± 0.004 0.295 ± 0.004 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.630 ± 0.012 0.567 MAX. Company reserves the right to improve product design , functions and reliability without notice. REV: B Page 3 QW-JBR06 Comchip Technology CO., LTD. Low VF SMD Bridge Rectifiers Marking Code Part Number Marking Code Z4DGP406L-HF Z4GP40JL Z4DGP408L-HF Z4GP40KL Z4DGP410L-HF Z4GP40ML ~ Z4GP 40JL YWW. + ~ Y = Last digit of the year 0 = 2010 1 = 2011 2 = 2012 Z4GP = Series code 40 = Amps class(4.0A) J = Voltage Class J = 600V K = 800V M = 1000V L = Low VF . = Halogen- free type WW = Mfg week 01 = First week 02 = Second week 03 = Third week Suggested PAD Layout 0.085(2.15) MAX. 0.201(5.10) MAX. 0.303(7.70) REF. 0.134(3.40) REF. 0.169(4.30) MAX. 0.091(2.30) 0.110(2.80) MAX. MAX. Standard Packaging REEL PACK Case Type Z4-D REEL Reel Size ( pcs ) (inch) 3,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV: B Page 4 QW-JBR06 Comchip Technology CO., LTD.