Datasheet

ITALIANA
RELE
SERIES F
Low Profile PCB Relays
All-or-Nothing relays ideally suited for all
electronic appliances demanding compact
design and reduced power consumption.
Design includes a protective dust cover
sealed to IP67 and provided with a special
device to avoid ozone formation.
Different contact ratings up to 16A are
available and a complete range of AC and
DC coil voltages. Terminals are for printed
circuit board mounting, either directly or by
appropriate sockets, for any application
requiring
“plug-in”
serviceability
or
maintenance.
DIELECTRIC STRENGTH
5000 V RMS
Coil / contacts :
2500 V RMS
Between adjacent contacts :
1000 V RMS
Between open contacts :
Ground / live parts :
(insulated ground)
SPECIFICATION
Min. insulation resistance
Pollution class / voltage
Environmental protection
Enclosure classification
Type of duty
Mechanical life expectancy
Max ops./hour @ no load
Max ops./hour @ rated load
OPERATING TIMES (At Rated Voltage)
Temperature range
Operate (excluding bounces) : max 12
Milliseconds
Storage temperature
Vibration
Release (excluding bounces) : max 8
Milliseconds
Overvoltage class
max 5
Bounces :
Milliseconds
Impulse voltage class
Weight
Insulation type (EN 61810-1)
100 ΜΩ @ 500 VDC (1 minute)
3 / 250 VAC (EN 61810-1)
RT III (EN 61810-1)
IP67 sealed (EN 60529)
Continuous
10x106 operations (AC / DC)
18000 (AC / DC)
360 (AC / DC)
-40 to +85° C
-40 to +85° C
10 g (10-55 Hz)
III (EN 61810-1)
6 kV (coil / contacts)
15 grams
reinforced (8mm) between coil & contacts
AVAILABLE TYPES
F31 - 3.5 mm pin-spacing 12A-250V AC
F51 - 5 mm pin-spacing 12A-250V AC
1 pole changeover.
Printed circuit terminations.
Standard contact material Ag-Ni 10%.
Normally open, alternative material and
gold-plated contact versions are available
on request for agreed quantities.
F52 - 5 mm pin-spacing 8A-250V AC
2 pole changeover.
Printed circuit terminations.
Standard contact material Ag-Ni 10%.
Normally open, alternative material and
gold-plated contact versions are available
on request for agreed quantities.
F61 - 5 mm pin-spacing 16A-250V AC
1 pole changeover.
Printed circuit terminations.
Standard contact material Ag-Ni 10%.
Normally open, alternative material and
gold-plated contact versions are available
on request for agreed quantities.
APPROVALS
I T A L I A N A R E L E' S r l. - Via dei Bravi, 40 I-20032 CORMANO - Italy
Tel (+39) 02 6140851- Fax (+39) 02 6140339 - E-mail: [email protected] - www.rele.it
COIL CHARACTERISTICS
Rated
Voltage
V
DC
Rated
Current
mA
Resistance R
Ω
Rated
Voltage
V
12
33
360
24
16.7
48
8.3
110
4.1
230
-
Rated
Current
mA
Resistance R
Ω
-
-
-
1440
24
30
350
5520
-
-
26530
115
7.7
8100
-
230
3.4
32500
Resistance values at 20°C ambient temp.
Power supply voltages:
12-24-48-110 VDC
24-115-230 VAC
Rated power: 400 to 500 mW (DC);
0.6 to 0.9 VA (AC)
Operating range:
-20% to +85% of nominal (DC)
-20% to +30% of nominal (AC)
Minimum hold voltage:
60% of nominal (DC)
80% of nominal (AC)
Must release voltage:
5% of nominal (DC)
10% of nominal (AC)
Thermic insulation class of winding
(IEC 317): F (155°C)
AC
Tolerance on Resistance: + 10%
CONTACT CHARACTERISTICS
F31
F52
F61
Maximum power rating (AC1) :
3000
2000
4000
12
8
16
A
Rated voltage (AC / DC) :
250 / 30
250 / 30
250 / 30
V
Maximum switched voltage (AC / DC) :
V
Rated current :
VA
250 / 110
250 / 110
250 / 110
Maximum instantaneous current(1) :
15
10
20
A
Maximum contact resistance (new contact) : (@ 6VDC - 1A)
50
50
50
mΩ
300 (5/5)
300 (5/5)
300 (5/5)
mW
Ag-Ni
Ag-Ni
Ag-Ni
90%-10%
Minimum switched load : (V / mA min.)
Standard material
(1) Make & maintaining only - max 0.5 sec.
ORDERING INFORMATION
F31 - 24 DC - S - 5
1
2
3
4
1 – Relay type: F31 - F51 - F52 - F61
2 – Coil supply voltage: AC or DC
3 – Contact configuration:
S = changeover (standard)
L = normally open (on request)
4 – Alternative contact material:
None = standard Silver/ Nickel (Ag-Ni)
4 = Silver/ Tin Oxide (Ag-SnO)
5 = Gold plated silver (Ag-Ni + 3µ Au)
Group 3 and 4 of code can be normally
omitted, concerning special types available
only on request for agreed min. quantities.
I T A L I A N A R E L E' S r l. - Via dei Bravi, 40 I-20032 CORMANO - Italy
Tel (+39) 02 6140851- Fax (+39) 02 6140339 - E-mail: [email protected] - www.rele.it