ITALIANA RELE SERIES C Industrial Relays General purpose relays having up to threepole changeover contact configuration and designed to switch up to 10A - 250V AC with good reliability. Featuring printed circuit terminals or 0.187” Faston spades (4.8x0.5mm), relays are in compliance with CEI-IEC-CSA-UL international standards. Exclusive sockets being also available to suit any application demanding plug-in serviceability and maintenance. DIELECTRIC STRENGTH 2000 V RMS Coil spring set to contacts : 2000 V RMS Between adjacent contacts : 1500 V RMS Between open contacts : 2000 V RMS Ground / live parts : OPERATING TIMES (At Rated Voltage) max 10 Operate (including bounces) : milliseconds max 10 Release (including bounces) : milliseconds max 4 Bounces : milliseconds SPECIFICATION Min. insulation resistance Insulation group (VDE 110) Enclosure classification Type of duty Mechanical life expectancy Max ops./hour @ no load Max ops./hour @ rated load Temperature range Storage temperature Vibration Impulse withstand voltage Operating class (CEI 41-1) 2x104 ΜΩ @ 500 VDC (all circuits) 1° Gr. C 250 VAC IP 40 (IEC 144) continuous 107 operations 30000 (AC / DC) 1800 (AC / DC) -10 to +55° C -40 to +80° C 6g / 5g (NO / NC contacts) 0 3 AVAILABLE TYPES C1-2 2-pole changeover 10A-250V AC - Faston 187 terminals (4.8x0.5mm) - Printed circuit terminals (1x0.5mm) Protective dust cover Weight: 72 grams Optional fixing tab on base C1-3 3-pole changeover 10A-250V AC - Faston 187 terminals (4.8x0.5mm) - Printed circuit terminals (1x0.5mm) Protective dust cover Weight: 75 grams Optional fixing tab on base APPROVALS All dimensions in mm (10A @ 120 VAC or 6A @ 220 VAC) I T A L I A N A R E L E' S r l. - Via dei Bravi, 40 I-20032 CORMANO - Italy Tel (+39) 02 6140851- Fax (+39) 02 6140339 - E-mail: [email protected] - www.rele.it COIL CHARACTERISTICS DC Ω Rated Current mA AC Resistance R Ω 22.5 400 5 Rated Voltage V Rated Current mA Resistance R 6 273 12 133 90 200 29 24 67 360 100 80 48 33 1440 50 320 110 14 7900 22 1800 230 - - 10 7700 Power supply voltage: 6-12-24-48-110-230 VAC 6-12-24-48-60-110 VDC Rated power: Impedance Z 1.5W (DC) ; 2.5 VA (AC) Ω Operating range: 15 - 20% to + 10% of nominal Minimum hold voltage: 60 80% of nominal (AC) 240 50% of nominal (DC) 960 Must release voltage: 15% of nominal (AC & DC) 5000 Thermic insulation class of winding 22000 (IEC 317): F (155°C) ARACTEISTICSCOCHARACTERISTICS CONTACT CHARACTERISTICS Power rating (AC1) : 2500 VA Switching power (DC1) : see diagram Rated current (AC1) : 10A Rated voltage: 250V AC Max switched voltage: 400VAC Max instantaneous current(1) : 20A (1) Max single-phase motor load: 1/4 HP (cosφ 0.7 – 240 VAC max) Initial contact resistance(2) : max. 30 mΩ standard 5 mΩ Contact material: Ag90% - Ni10% (2) Max. time 0.5 sec. Category of application (EN 60255) : 3 ORDERING INFORMATION C1 - 3 - 230AC - FA 1 2 3 4 1 - Relay type: C4 2 – Contact configuration: 2 or 3 pole changeover contacts 3 - Coil supply voltage: (AC or DC) 4 – Termination variant: FA = Faston terminals CS = PCB terminals FS = Faston + fixing tab I T A L I A N A R E L E' S r l. - Via dei Bravi, 40 I-20032 CORMANO - Italy Tel (+39) 02 6140851- Fax (+39) 02 6140339 - E-mail: [email protected] - www.rele.it