ITALIANA RELE SERIES D Auxiliary Miniature Relays All-or-Nothing relays offering very high performance and compact size. Design includes a clear protective dust cover. Ratings range from 12 to 6 A, depending upon contact configuration (up to four pole, changeover). Variations available include a printed circuit and a plug-in type, with AC or DC rated coils. A complete range of sockets is available for the plug-in types (see exclusive literature) DIELECTRIC STRENGTH 2500 V RMS Coil / contacts : 2500 V RMS Adjacent poles : (two pole) 2000 V RMS Adjacent poles : (four pole) 1500 V RMS Between open contacts : 2000 V RMS Ground / live parts : OPERATING TIMES (At Rated Voltage) Operate (excluding bounces) : max 13 milliseconds Release (excluding bounces) : max 8 milliseconds max 7 Bounces : milliseconds SPECIFICATION Min. insulation resistance Insulation group (VDE 110) Enclosure classification Type of duty Max leakage current Mechanical life expectancy Max ops./hour @ no load Max ops./hour @ rated load Temperature range Storage temperature Vibration Overvoltage category Weight 104 ΜΩ @ 500 VDC (all circuits) 1° Gr. B 250 VAC (2 pole: C 250) IP 40 (IEC 144) Continuous 10 mA 20x106 operations (AC / DC) 18000 (AC / DC) 1200 (AC / DC) -40 to +55°C (AC) / -40 to +70°C (DC) -40 to +85°C 5g (10 to 150 Hz) II (2 pole: III) IEC 61810-5 35 grams AVAILABLE TYPES D2N - 2 pole changeover 12A-250V AC - plug-in / solder terminals (2.2x0.5mm) D2P - 2 pole changeover 10A-250V AC - printed circuit terminals (1x0.5mm) Double action button (Push-to-test/turn-tolock) and flag indicator fitted as standard. Cadmium-free contact material (Ag-Ni). Gold-plated contacts and special versions fitted with LED indicator, ground bolt or fixing tabs available on request for agreed minimum quantities. D4N - 4 pole changeover 6A-250V AC - plug-in / solder terminals (2.2x0.5mm) D4P - 4 pole changeover 6A-250V AC - printed circuit terminals (1x0.5mm) Double action button (Push-to-test/turn-tolock) and flag indicator fitted as standard. Cadmium-free contact material (Ag-Ni). Gold-plated contacts and special versions fitted with LED indicator, ground bolt or fixing tabs available on request for agreed minimum quantities. APPROVALS All dimensions in mm I T A L I A N A R E L E' S r l. - Via dei Bravi, 40 I-20032 CORMANO - Italy Tel (+39) 02 6140851- Fax (+39) 02 6140339 - E-mail: [email protected] - www.rele.it COIL CHARACTERISTICS Rated Voltage V DC AC 6 Rated Current mA 150 40 Rated Current mA 260 10 21 12 75 160 130 38 84 92 24 38 640 65 150 338 370 48 18 2600 33 650 1300 1450 60 15 4000 - - - - 110 8.1 13600 7020 7800 - - 14 7 3400 230 16100 28800 33000 Resistance R Ω Resistance values at 20°C ambient temp. Resistance R Ω Reactance X Ω Impedance Z Ω 23 Tolerance on R, X and Z: + 10% Power supply voltages: 6-12-24-48-110-230 VAC 6-12-24-48-60-110 VDC Rated power: 0.9W (DC) ; 1.6 VA (AC) Operating range: - 20% to + 10% of nominal Minimum hold voltage: 80% of nominal (AC) Must release voltage: 20% of nominal (AC) 10% of nominal (DC) Thermic insulation class of winding (IEC 317): F (155°C) CTEISTICSCOCHARACTERISTICS CONTACT CHARACTERISTICS 2 pole 4 pole Maximum power rating (AC1) : (Plug-in / PCB version) 3000 / 2500 1500 / 1500 Rated current : (Plug-in / PCB version) 12 / 10 6/6 A Rated voltage : 250 250 VAC Maximum switched voltage : 250 250 V Minimum switched voltage : 5 5 V Switching power (DC1) : see diagram Maximum instantaneous current(1) : (Plug-in / PCB version) Maximum single-phase motor load (cosφ 0.7 – 250VAC max.) : Initial contact resistance(2) : 24 / 20 12 / 12 A 1/3 1/10 HP < 100 Standard material (1) Make & maintaining only - max. 0.5 sec. Ag - Ni (2) Category of application (EN 60255) : 3 ORDERING INFORMATION 1 – Relay Series: D 2 – Number of poles: 2 or 4 3 – Termination variant: N = solder lugs / plug-in P = printed circuit 4 – Coil supply voltage: AC or DC 5 – Optional equipment: IL (LED indicator); DP (protection diode); DL (LED + diode); D4N - 230 AC - IL - 5 1 2 3 4 VA 5 6 < 100 mΩ Ag - Ni 90-10% VM (grounding bolt); AS-AP (fixing tabs). 6 – Alternative contact materials: None = standard (Ag-Ni 10%) 5 = Gold plated silver (Ag-Ni + 5µ Au) Groups 5 & 6 of code are normally omitted, concerning special types available only on request for agreed minimum quantities. I T A L I A N A R E L E' S r l. - Via dei Bravi, 40 I-20032 CORMANO - Italy Tel (+39) 02 6140851- Fax (+39) 02 6140339 - E-mail: [email protected] - www.rele.it