H BY APPD DATE ER040866 2. MATERIAL SPECIFICATIONS: BAYONET SLEEVE, BODY, CONTACT,FERRULE : BRASS PER ASTM B16 INSULATOR: TEFLON PER ASTM D1710 SPRING WASHER, OUTER CONTACT: BERYLLIUM COPPER, ASTM-B-194 GASKET: SILICONE RUBBER 3. FINISH SPECIFICATIONS: BAYONET SLEEVE, BODY: .000100MIN NICKEL PER AMS-QQ-N-290 OVER COPPER FLASH PER ASTM B734 (ROHS) CONTACT: .000030 MIN. GOLD PER ASTM B488, OVER NICKEL PER AMS-QQ-N-290 (ROHS) ALL OTHER METAL PARTS: .000050 MIN NICKEL PER AMS-QQ-N290 OVER .000050 MIN COPPER PER ASTM B734 (ROHS) P/N 2065-E00-C9005N 2065-E00-C9005NU 4. CONTACT AND FERRULE SHIPPED LOOSE. DESCRIPTION SINGLE PACK BULK PACK CY 1. FOR GENERAL SERIES SPECIFICATIONS, SEE SDPRF-206. DESCRIPTION BB 03/15/12 REV NOTES: UNLESS OTHERWISE SPECIFIED QTY 1 100 5. FOR USE WITH BELDEN CABLE 1694A OR EQUIVALENT. 6. FOR CRIMPING USE KINGS KTH-5000 & KTH-5017 OR KTH-1000 & KTH-2325 (.046AND .278 HEX CAVITY). 7. ASSEMBLE TO CABLE SEE 3-661-4. 8. THESE AREAS HAVE WHITE MARKING. MARKING: KINGS + 2065+CABLE CODE+ DATE CODE+LOCATION CODE 9. ELECTRICAL SPECIFICATIONS: IMPEDANCE: 75 OHMS FREQUENCY RANGE: DC TO 6 GHz RETURN LOSS: UP TO 1.5GHz. <-31 dB UP TO 3GHz. <-24 dB UP TO 6GHz. <-20 dB .223 5.66 10. COMPLIANT TO SMPTE 424M (3G-SDI) SPECIFICATION. .185 4.70 .330 8.38 .290 7.37 .500 12.70 SEE NOTE 8 1.267 32.18 WHEN ASSEMBLED CATALOG P/N: 2065-E00-C9005N .624 15.85 .312 7.92 .155 3.94 PER ASME Y14.5M-1994 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES [MM] TOLERANCES: DECIMAL: .XX [X.X] ± .01 [0.3] .XXX [X.XX] ± .005 [0.13] .XXXX [X.XXX] ± .XXXX ANGLES: ± 2° SCALE: 2.5:1 THIRD ANGLE CUSTOMER SALES DRAWING RECOMMENDED CABLE TRIM DIMENSIONS DMF026 B DRAWN CY APPROVED XXX DATE APPROVED 03/03/09 CTC DATE APPROVED XX/XX/XX XXX DATE 03/03/09 DATE XX/XX/XX Winchester Electronics Corporation 62 Barnes Industrial Road North Wallingford, Connecticut 06492 BNC 75 OHM PLUG FOR BELDEN 1694A OR EQUIVALENT (ROHS COMPLIANT) SHT A SD2065-E00-C9005N 1 OF 1 REV H